Recently, there has been an emerging radio frequency fingerprint identification (RFFI) technology that enhances fingerprint distinguishability by deliberately injecting an RF fingerprint into the device's Wi-Fi baseband signal. The current RF fingerprint injection methods are impractical, degrading the communication quality between Wi-Fi devices while offering limited improvements in distinguishability among a set of devices. To address these issues, we propose injecting I/Q imbalance into a short training field (STF) instead of the entire baseband signal. Our findings indicate that this method can effectively preserve the quality of the original wireless communication. Besides, a temperature-independent RF feature differential carrier frequency offset (DCFO) is proposed as an extended feature for the enhancement of fingerprint distinguishability. Building upon these, we introduce a fingerprinting scheme called PR-RFFI that generates distinguishable fingerprints for a set of devices by injecting appropriate I/Q imbalance and DCFO into the STF. Leveraging the short-term invariance of the channel, we design a practical I/Q imbalance extraction method based on the communication-quality preserving injection. Moreover, we design an optimal assignment method for I/Q imbalance and DCFO to maximize the distinguishability of RF fingerprints for all devices. Finally, we implement the PR-RFFI solution and conduct experiments in real-world and simulation scenarios. The experimental results demonstrate that PR-RFFI consistently maintains good communication quality, and achieves over 98% precision, recall, and F1-score.

Nowadays, LoRa radio frequency fingerprinting has gained widespread attention due to its lightweight nature and difficulty in being forged. The existing fingerprint extraction methods are mainly divided into two categories, i.e., deep learning-based methods and feature engineering-based methods. Deep learning-based methods have poor robustness and require significant resource costs for model training. Although feature engineering-based methods can overcome these drawbacks, the features it commonly uses, such as carrier frequency offset (CFO) and phase noise, lack sufficient discriminative power. Therefore, it is very challenging to design a radio frequency fingerprinting solution with high-accuracy and stable identification performance. Fortunately, we find that the differential phase noise of adjacent dual frames possesses excellent discriminative power and stability. Then, we design the corresponding radio frequency fingerprinting solution called Diff-ADF, which utilizes a classifier with differential phase noise as the primary feature, complemented by the use of CFO as an auxiliary feature. Finally, we implement the Diff-ADF and conduct experiments in real environments. Experimental results demonstrate that our proposed solution achieves an accuracy of over 90% on training and test data collected from different days, which is significantly superior to deep learning-based methods. Even in non-line-of-sight environments, our identification accuracy can still reach close to 85%.

Ultrasound (US) imaging of the carotid artery (CA) is a non-invasive diagnostic tool widely used in the medical field to assess the condition of the carotid artery, thereby predicting the risk of cardiovascular and cerebrovascular diseases. However, implementing this method in primary healthcare can be challenging due to the requirement for professionally trained sonographers. With the adoption of US robotic devices, the probe pose can be acquired while scanning, offering the possibility for 3D reconstruction and providing analyses that are not dependent on operator experience. This article introduces a method to semi-automatically acquire serialized US images of the common carotid artery (CCA). The method involves a specially designed robotic device built with a 6-RSU parallel mechanism, which is controlled according to robot pose, force sensor data and synchronous US images. To validate the images acquired, a method is proposed to segment the intima-media of CCA and calculate the intima-media thickness (IMT), which is a key indicator for cerebrovascular events prediction. After that, we propose an algorithm to reconstruct CCA into 3D voxel data with patient movement and cardiac cycle compensated, and a longitudinal view US image of CCA can be resliced from the voxel. The methods are tested on human subjects and the results indicate that the system and workflow can provide both quantitative and qualitative information of CCA for further diagnosis.

Recently, there has been an emerging radio frequency fingerprint identification (RFFI) technology that enhances fingerprint distinguishability by deliberately injecting I/Q imbalance into the device’s Wi-Fi baseband signal. Due to the additional injection of I/Q imbalance, this approach inevitably impacts the communication quality between devices, as it reduces the accuracy of channel estimation. To address this issue, we propose injecting the I/Q imbalance into a short training field (STF) instead of the entire baseband signal. Our findings indicate that this method can effectively preserve the quality of the original wireless communication. Building upon this, we introduce a fingerprinting scheme called CQP-RFFI that generates distinguishable fingerprints for a set of devices by injecting appropriate I/Q imbalance into the STF. Leveraging the short-term invariance of the channel, we design a practical I/Q imbalance extraction method based on the communication-quality preserving injection. Moreover, we design an optimal assignment method for I/Q imbalance to maximize the distinguishability of RF fingerprints for all devices. Finally, we implement the CQP-RFFI solution and conduct experiments in real-world scenarios. The experimental results demonstrate that CQP-RFFI achieves 96% precision, recall, and F1-score, and can consistently maintain good communication quality.

Radio frequency fingerprint identification (RFFI) is a promising technique for smartphone identification. However, we find that the temperature of the RF front end in smartphones can significantly impact the RF features, including the carrier frequency offset (CFO) and statistical RF features. The unstable RF features caused by temperature changes can negatively affect the performance of state-of-the-art RFFI approaches. To this end, we propose the RF-TESI solution for smartphone identification under temperature variation. First, we construct a dataset by extracting temperature and RF features. In the dataset, the extracted temperature values constitute a set of temperature values and each registered temperature value corresponds to a group of RF features. Next, we evaluate the distinctiveness of RF features across smartphones to select the most suitable RF fingerprint. Then, we train multiple random forest models, each tagged with a registered temperature. In addition, because there are still many temperatures out of the temperature set, we design an RF fingerprint estimation method to estimate RF fingerprints at unregistered temperatures. Finally, the experiments show RF-TESI demonstrates satisfactory performance under different scenarios, taking into account variations in temperature, time and position. Besides, our proposed approach is better than all state-of-the-art approaches in smartphone identification.

In recent years, radio frequency (RF) fingerprinting has attracted more and more attention. Many different types of RF fingerprints have been proposed, such as carrier frequency offset (CFO), sampling frequency offset and error vector magnitude. Among them, the CFO fingerprint is recognized as a promising RF fingerprint. However, for commonly used smartphones, we find that its CFO fingerprint is unstable, because the temperature of crystal oscillator varies greatly and large fluctuations of temperature significantly affect its CFO fingerprint. Therefore, the solutions of CFO-based fingerprinting will no longer be effective for smartphones if the temperature of crystal oscillator is not involved. To this end, we propose a more reliable and applicable CFO-based fingerprinting approach called temperature-aware radio frequency fingerprinting (TeRFF). First, we construct a dataset by extracting crystal oscillator's temperature and the corresponding CFO value on multiple smartphones over a period. In the dataset, the extracted temperature values constitute a set of temperature values, and each registered temperature value corresponds to a group of CFO samples. On this basis, we train multiple Naive Bayes models, each tagged with a registered temperature value. Moreover, since there are many temperature values which are not in the temperature set, we design a CFO estimation method to estimate the CFO fingerprint at the unregistered temperature. Finally, the experimental results demonstrate that our proposed solution TeRFF makes the CFO fingerprinting still effective for smartphone identification, and its performance is better than other existing RF fingerprinting schemes.

In Wi-Fi networks, devices can be identified by physical features or MAC layer features, and the solutions of device identification can be used to enhance device authentication. Since 802.11ac Standard has been widely applied in Wi-Fi devices in recent years, the traditional identification methods designed for 802.11b/g/n devices will be no longer applicable. Therefore, it is necessary to design the corresponding 802.11ac device identification method. Compared with the physical feature-based method, the MAC layer-based method has advantages of low cost and easy deployment, so it has attracted more and more researchers' attention. In this paper, we use the fields from 802.11ac MAC frame as fingerprints. Through the analysis of 802.11ac MAC frame, a preprocessing method of the frame is proposed to mask strong and easy-to-modified identifiers. Then to overcome the difficulties caused by random changes in field values, we propose a device identification method based on the deep learning to select features automatically. Compared with the previous one using the transmitting rate as a feature, our method does not spend much time capturing packets in the device identification stage and has better performance whose average precision and recall exceed 99%.