In multiuser MIMO (MU-MIMO) LANs, the achievable throughput of a client depends on who is transmitting concurrently with it. Existing MU-MIMO MAC protocols, however, enable clients to use the traditional 802.11 contention to contend for concurrent transmission opportunities on the uplink. Such a contention-based protocol not only wastes lots of channel time on multiple rounds of contention but also fails to maximally deliver the gain of MU-MIMO because users randomly join concurrent transmissions without considering their channel characteristics. To address such inefficiency, this paper introduces MIMOMate, a leader-contention-based MU-MIMO MAC protocol that matches clients as concurrent transmitters according to their channel characteristics to maximally deliver the MU-MIMO gain while ensuring all users fairly share concurrent transmission opportunities. Furthermore, MIMOMate elects the leader of the matched users to contend for transmission opportunities using traditional 802.11 CSMA/CA. It hence requires only a single contention overhead for concurrent streams and can be compatible with legacy 802.11 devices. A prototype implementation in USRP N200 shows that MIMOMate achieves an average throughput gain of 1.42× and $1.52× over the traditional contention-based protocol for two- and three-antenna AP scenarios, respectively, and also provides fairness for clients.

In multiuser MIMO (MU-MIMO) networks, the optimal bit rate of a user is highly dynamic and changes from one packet to the next. This breaks traditional bit rate adaptation algorithms, which rely on recent history to predict the best bit rate for the next packet. To address this problem, we introduce TurboRate, a rate adaptation scheme for MU-MIMO LANs. TurboRate shows that clients in a MU-MIMO LAN can adapt their bit rate on a per-packet basis if each client learns two variables: its SNR when it transmits alone to the access point, and the direction along which its signal is received at the AP. TurboRate also shows that each client can compute these two variables passively without exchanging control frames with the access point. A TurboRate client then annotates its packets with these variables to enable other clients to pick the optimal bit rate and transmit concurrently to the AP. A prototype implementation in USRP-N200 shows that traditional rate adaptation does not deliver the gains of MU-MIMO WLANs, and can interact negatively with MU-MIMO, leading to low throughput. In contrast, enabling MU-MIMO with TurboRate provides a mean throughput gain of 1.7x and 2.3x, for 2-antenna and 3-antenna APs respectively.