Reconfigurable antennas (RAs) utilize the electromagnetic (EM) domain to provide dynamic control over antenna radiation patterns, which offers an effective way to enhance power efficiency in wireless links. Unlike conventional arrays with fixed element patterns, RAs enable on-demand beampattern synthesis by directly controlling each antenna's EM characteristics. While existing research on RAs has primarily focused on improving spectral efficiency, this paper explores their application for downlink localization. Moreover, the majority of existing works focus on far-field scenarios with little attention on near-field (NF). Motivated by these gaps, we consider a synthesis model in which each antenna generates desired beampatterns from a finite set of EM basis functions. We then formulate a joint optimization problem for the baseband (BB) and EM precoders with the objective of minimizing the user equipment (UE) position error bound (PEB) in NF conditions. Our analytical derivations and extensive simulation results demonstrate that the proposed hybrid precoder design for RAs significantly improves UE positioning accuracy compared to traditional non-reconfigurable arrays.

Accurate cross-band channel prediction is essential for 6G networks, particularly in the upper mid-band (FR3, 7-24 GHz), where penetration loss and blockage are severe. Although ray tracing (RT) provides high-fidelity modeling, it remains computationally intensive, and high-frequency data acquisition is costly. To address these challenges, we propose CIR-UNext, a deep learning framework designed to predict 7 GHz channel impulse responses (CIRs) by leveraging abundant 3.5 GHz CIRs. The framework integrates an RT-based dataset pipeline with attention U-Net (AU-Net) variants for gain and phase prediction. The proposed AU-Net-Aux model achieves a median gain error of 0.58 dB and a phase prediction error of 0.27 rad on unseen complex environments. Furthermore, we extend CIR-UNext into a foundation model, Channel2ComMap, for throughput prediction in MIMO-OFDM systems, demonstrating superior performance compared with existing approaches. Overall, CIR-UNext provides an efficient and scalable solution for cross-band prediction, enabling applications such as localization, beam management, digital twins, and intelligent resource allocation in 6G networks.

Integrated sensing and communication (ISAC) is a key technology for enabling a wide range of applications in future wireless systems. However, the sensing performance is often degraded by model mismatches caused by geometric errors (e.g., position and orientation) and hardware impairments (e.g., mutual coupling and amplifier non-linearity). This paper focuses on the angle estimation performance with antenna arrays and tackles the critical challenge of array beam pattern calibration for ISAC systems. To assess calibration quality from a sensing perspective, a novel performance metric that accounts for angle estimation error, rather than beam pattern similarity, is proposed and incorporated into a differentiable loss function. Additionally, a cooperative calibration framework is introduced, allowing multiple user equipments to iteratively optimize the beam pattern based on the proposed loss functions and local data, and collaboratively update global calibration parameters. The proposed models and algorithms are validated using real-world beam pattern measurements collected in an anechoic chamber. Experimental results show that the angle estimation error can be reduced from 1.01◦ to 0.11◦ in 2D calibration scenarios, and from 5.19◦ to 0.86◦ in 3D calibration scenarios.

Positioning technology, which aims to determine the geometric state of a device in a global coordinate system, is a key component in integrated sensing and communication systems. In addition to traditional active anchor-based positioning systems, reconfigurable intelligent surfaces (RISs) have shown great potential for enhancing system performance. However, their ability to manipulate electromagnetic waves and ease of deployment pose potential risks, as unauthorized RIS may be intentionally introduced to jeopardize the positioning service. Such an unauthorized RIS can introduce unexpected interference into the legitimate positioning system, distorting the transmitted signals, and leading to degraded positioning accuracy. In this work, we investigate the scenario of RIS-aided positioning in the presence of interference from an unauthorized RIS. Theoretical lower bounds are derived to analyze the impact of unauthorized RIS on channel parameter estimation and positioning accuracy. Several codebook design strategies for unauthorized RIS are evaluated, and various system arrangements are discussed. Simulation results show that unauthorized RIS paths with high power or delay values close to those of legitimate RIS paths significantly degrade positioning accuracy. Furthermore, an unauthorized RIS generates more effective interference when using directional beamforming codebooks compared with a random phase codebook.

Accurate and robust localization is a critical enabler for emerging 5G and 6G applications, including autonomous driving, extended reality (XR), and smart manufacturing. While data-driven approaches have shown promise, most existing models require large amounts of labeled data and struggle to generalize across deployment scenarios and wireless configurations. To address these limitations, we propose a foundation-model-based solution tailored for wireless localization. We first analyze how different self-supervised learning (SSL) tasks acquire general-purpose and task-specific semantic features based on information bottleneck (IB) theory. Building on this foundation, we design a pretraining methodology for the proposed Large Wireless Localization Model (LWLM). Specifically, we propose an SSL framework that jointly optimizes three complementary objectives: (i) spatial-frequency masked channel modeling (SF-MCM), (ii) domain-transformation invariance (DTI), and (iii) position-invariant contrastive learning (PICL). These objectives jointly capture the underlying semantics of wireless channel from multiple perspectives. We further design lightweight decoders for key downstream tasks, including time-of-arrival (ToA) estimation, angle-of-arrival (AoA) estimation, single base station (BS) localization, and multiple BS localization. Comprehensive experimental results confirm that LWLM consistently surpasses both model-based and supervised learning baselines across all localization tasks. In particular, LWLM achieves 26.0%--87.5% improvement over transformer models without pretraining, and exhibits strong generalization under label-limited fine-tuning and unseen BS configurations, confirming its potential as a foundation model for wireless localization.

Beamforming plays a crucial role in millimeter wave (mmWave) communication systems to mitigate the severe attenuation inherent to this spectrum. However, the use of large active antenna arrays in conventional architectures often results in high implementation costs and excessive power consumption, limiting their practicality. As an alternative, deploying large arrays at transceivers using passive devices, such as reconfigurable intelligent surfaces (RISs), offers a more cost-effective and energy-efficient solution. In this paper, we investigate a promising base station (BS) architecture that integrates a beyond diagonal RIS (BD-RIS) within the BS to enable passive beamforming. By utilizing Takagi’s decomposition and leveraging the effective beamforming vector, the RIS profile can be designed to enable passive beamforming directed toward the target. Through the beamforming analysis, we reveal that BD-RIS provides robust beamforming performance across various system configurations, whereas the traditional diagonal RIS (D-RIS) exhibits instability with increasing RIS size and decreasing BS-RIS separation-two critical factors in optimizing RIS-assisted systems. Comprehensive computer simulation results across various aspects validate the superiority of the proposed BS-integrated BD-RIS over conventional D-RIS architectures, showcasing performance comparable to active analog beamforming antenna arrays.

Sixth-generation (6G) networks are envisioned to achieve full-band cognition by jointly utilizing spectrum resources from Frequency Range 1 (FR1) to Frequency Range 3 (FR3, 7–24 GHz). Realizing this vision faces two challenges. First, physics-based ray tracing (RT), the standard tool for network planning and coverage modeling, becomes computationally prohibitive for multi-band and multi-directional analysis over large areas. Second, current 5G systems rely on inter-frequency measurement gaps for carrier aggregation and beam management, which reduce throughput, increase latency, and scale poorly as bands and beams proliferate. These limitations motivate a data-driven approach to infer high-frequency characteristics from low-frequency observations. This work proposes CommUNext, a unified deep learning framework for cross-band, multi-directional signal strength (SS) prediction. The framework leverages low-frequency coverage data and crowd-aided partial measurements at the target band to generate high-fidelity FR3 predictions. Two complementary architectures are introduced: Full CommUNext, which substitutes costly RT simulations for large-scale offline modeling, and Partial CommUNext, which reconstructs incomplete low-frequency maps to mitigate measurement gaps in real-time operation. Experimental results show that CommUNext delivers accurate and robust high-frequency SS prediction even with sparse supervision, substantially reducing both simulation and measurement overhead.

Integrated sensing and communication enables simultaneous communication and sensing tasks, including precise radio positioning and mapping, essential for future 6G networks. Current methods typically model environmental landmarks as isolated incidence points or small reflection areas, lacking detailed attributes essential for advanced environmental interpretation. This paper addresses these limitations by developing an end-to-end cooperative uplink framework involving multiple base stations and users. Our method uniquely estimates extended landmark objects and incorporates obstruction-based outlier removal to mitigate multi-bounce signal effects. Validation using realistic ray-tracing data demonstrates substantial improvements in the richness of the estimated environmental map.

The concept of 6G distributed integrated sensing and communications (DISAC) builds upon the functionality of integrated sensing and communications (ISAC) by integrating distributed architectures, significantly enhancing both sensing and communication coverage and performance. In 6G DISAC systems, tracking target trajectories requires base stations (BSs) to hand over their tracked targets to neighboring BSs. Determining what information to share, where, how, and when is critical to effective handover. This paper addresses the target handover challenge in DISAC systems and introduces a method enabling BSs to share essential target trajectory information at appropriate time steps, facilitating seamless handovers to other BSs. The target tracking problem is tackled using the standard trajectory Poisson multi-Bernoulli mixture (TPMBM) filter, enhanced with the proposed handover algorithm. Simulation results confirm the effectiveness of the implemented tracking solution.

We investigate cooperative impersonation jamming on angle-based physical layer authentication (PLA) within 6G systems using hybrid antenna arrays. PLA leverages angle-ofarrival (AoA) information to authenticate user equipment, but remains vulnerable to sophisticated jamming where multiple adversaries cooperate. We extend previous research by formulating a comprehensive model of PLA that integrates hybrid arrays and by developing optimized jamming strategies that consider energy and information constraints. Our results show that analog arrays are more vulnerable to cooperative jamming than hybrid arrays. Additionally, the combiner design in the hybrid array, along with the energy and information constraints on jamming strategies, significantly influences the success of jamming. By identifying vulnerabilities in PLA and studying effective countermeasures, this work contributes to advancing physical layer authentication in 6G systems.

This paper introduces a novel approach to efficient localization in next-generation communication systems through a base station (BS)-enabled passive beamforming utilizing beyond diagonal reconfigurable intelligent surfaces (BD-RISs). Unlike conventional diagonal RISs (D-RISs), which suffer from limited beamforming capability, a BD-RIS provides enhanced control over both phase and amplitude, significantly improving localization accuracy. By conducting a comprehensive Cramér-Rao lower bound (CRLB) analysis across various system parameters in both near-field and far-field scenarios, we establish the BD-RIS structure as a competitive alternative to traditional active antenna arrays. Our results reveal that BD-RISs achieve near active antenna arrays performance in localization precision, overcoming the limitations of D-RISs and underscoring its potential for high-accuracy positioning in future communication networks. This work envisions the use of BD-RIS for enabling passive beamforming-based localization, setting the stage for more efficient and scalable localization strategies in sixth-generation networks and beyond.

Reconfigurable intelligent surfaces (RISs) are expected to be a main component of future 6G networks due to their capability to create a controllable wireless environment, achieve extended coverage, and improve localization accuracy. In this paper, we present a novel cooperative positioning use case of the RIS in mmWave frequencies and show that in the presence of RIS, together with sidelink communications, localization with zero access points (APs) is possible. We show that multiple (at least three) half-duplex single-antenna user equipments (UEs) can cooperatively estimate their positions through device-to-device communications with a single RIS as an anchor without the need for any APs. We start by formulating a three-dimensional positioning problem with Cramér-Rao lower bound (CRLB) derived for performance analysis. After that, we discuss the RIS profile design and the power allocation strategy between the UEs. Then, we propose low-complexity estimators for estimating the channel parameters and UEs’ positions. Finally, we evaluate the performance of the proposed estimators and RIS profiles in the considered scenario via extensive simulations and show that sub-meter level positioning accuracy can be achieved under multi-path propagation.

Sidelink positioning research predominantly focuses on the snapshot positioning problem, often within the mmWave band. Only a limited number of studies have delved into vehicle-to-anything (V2X) tracking within sub-6 GHz bands. In this paper, we investigate the V2X sidelink tracking challenges over sub-6 GHz frequencies. We propose a Kalman-filter-based tracking approach that leverages the estimated error covariance lower bounds (EECLBs) as measurement covariance, alongside a gating method to augment tracking performance. Through simulations employing ray-tracing data and super-resolution channel parameter estimation, we validate the feasibility of sidelink tracking using our proposed tracking filter with two novel EECLBs. Additionally, we demonstrate the efficacy of the gating method in identifying line-of-sight paths and enhancing tracking performance.

In this paper, we investigate the potential of reconfigurable intelligent surfaces (RISs) in facilitating passive/device-free three-dimensional (3D) drone localization within existing cellular infrastructure operating at millimeter-wave (mmWave) frequencies and employing multiple antennas at the transceivers. The developed localization system operates in the bi-static mode without requiring direct communication between the drone and the base station. We analyze the theoretical performance limits via Fisher information analysis and Cramér Rao lower bounds (CRLBs). Furthermore, we develop a low-complexity yet effective drone localization algorithm based on coordinate gradient descent and examine the impact of factors such as radar cross section (RCS) of the drone and training overhead on system performance. It is demonstrated that integrating RIS yields significant benefits over its RIS-free counterpart, as evidenced by both theoretical analyses and numerical simulations.

Localization plays an increasingly pivotal role in 5G/6G systems, enabling various applications. This paper focuses on the privacy concerns associated with delay-based localization, where unauthorized base stations attempt to infer the location of the end user. We propose a method to disrupt localization at unauthorized nodes by injecting artificial components into the pilot signal, exploiting model mismatches inherent in these nodes. Specifically, we investigate the effectiveness of two techniques, namely artificial multipath (AM) and artificial noise (AN), in mitigating location leakage. By leveraging the misspecified Cramer-Rao bound framework, we evaluate the impact of these techniques on unauthorized localization performance. Our results demonstrate that pilot manipulation significantly degrades the accuracy of unauthorized localization while minimally affecting legitimate localization. Moreover, we find that the superiority of AM over AN varies depending on the specific scenario.

High-frequency communication systems bring extremely large aperture arrays (ELAA) and large bandwidths, integrating localization and (bi-static) sensing functions without extra infrastructure. Such systems are likely to operate in the near-field (NF), where the performance of localization and sensing is degraded if a simplified far-field channel model is considered. However, when taking advantage of the additional geometry information in the NF, e.g., the encapsulated information in the wavefront, localization and sensing performance can be improved. In this work, we formulate a joint synchronization, localization, and sensing problem in the NF. Considering the array size could be much larger than an obstacle, the effect of partial blockage (i.e., a portion of antennas are blocked) is investigated, and a blockage detection algorithm is proposed. The simulation results show that blockage greatly impacts performance for certain positions, and the proposed blockage detection algorithm can mitigate this impact by identifying the blocked antennas.

Localization is envisioned as a key enabler to satisfy the requirements of communications and context-aware services in the fifth/sixth generation (5G/6G) communication systems. User localization can be achieved based on delay and angle estimation using uplink/downlink pilot signals. However, hardware impairments (HWIs) (such as phase noise and mutual coupling) distort the signals at both the transmitter and receiver sides and thus affect the localization performance. While this impact can be ignored at lower frequencies with less severe HWIs, and less stringent localization requirements, modeling and analysis efforts are needed for high-frequency bands to assess degradation in localization accuracy due to HWIs. In this work, we model various types of impairments for a mmWave multiple-input-multiple-output communication system and conduct a misspecified Cramér-Rao bound analysis to evaluate HWI-induced performance losses in terms of angle/delay estimation and the resulting 3D position/orientation estimation error. We also investigate the effect of individual and overall HWIs on communications in terms of symbol error rate (SER). Our extensive simulation results demonstrate that each type of HWI leads to a different level of degradation in angle and delay estimation performance, and the prominent impairment factors on delay estimation will have a dominant negative effect on SER.

Positioning is expected to support communication and location-based services in the fifth/sixth generation (5G/6G) networks. With the advent of reflective reconfigurable intelligent surfaces (RISs), radio propagation channels can be controlled, making high-accuracy positioning and extended service coverage possible. However, the passive nature of the RIS requires a signal source such as a base station (BS), which limits the positioning service in extreme situations, such as tunnels, dense urban areas, or complicated indoor scenarios where 5G/6G BSs are not accessible. In this work, we show that with the assistance of (at least) two RISs and sidelink communication between two user equipments (UEs), the absolute positions of these UEs can be estimated in the absence of BSs. A two-stage 3D sidelink positioning algorithm is proposed, benchmarked by the derived Cramér-Rao bounds. The effects of multipath and RIS profile designs on positioning performance are evaluated, and localization analyses are performed for various scenarios. Simulation results demonstrate the promising positioning accuracy of the proposed BS-free sidelink communication system. Additionally, we propose and evaluate several solutions to eliminate potential blind areas where positioning performance is poor, such as removing clock offset via round-trip communication, adding geometrical prior or constraints, as well as introducing more RISs.

In the upcoming sixth generation (6G) of wireless communication systems, reconfigurable intelligent surfaces (RISs) are regarded as one of the promising technological enablers, which can provide programmable signal propagation. Therefore, simultaneous radio localization and mapping (SLAM) with RISs appears as an emerging research direction within the 6G ecosystem. In this paper, we propose a novel framework of RIS-enabled radio SLAM for wireless operation without the intervention of access points (APs). We first design the RIS phase profiles leveraging prior information for the user equipment (UE), such that they uniformly illuminate the angular sector where the UE is probabilistically located. Second, we modify the marginal Poisson multi-Bernoulli SLAM filter and estimate the UE state and landmarks, which enables efficient mapping of the radio propagation environment. Third, we derive the theoretical Cramér-Rao lower bounds on the estimators for the channel parameters and the UE state. We finally evaluate the performance of the proposed method under scenarios with a limited number of transmissions, taking into account the channel coherence time. Our results demonstrate that the RIS enables solving the radio SLAM problem with zero APs, and that the consideration of the Doppler shift contributes to improving the UE speed estimates.

As a key enabler of Terahertz (THz)-based wireless technologies, large-scale multiple-input-multiple-output systems are well known for their advantages in both communication and localization. Contrary to existing works that mostly focus on planar arrays, this paper first explores the potential of three-dimensional (3D) spatial array structures in joint localization and communication coverage enhancement. We consider a THz-band wireless system where a user is equipped with a 3D array receiving downlink far-field signals from multiple base stations with known positions and orientations over Rician fading channels. First, we derive the constrained Cramér-Rao bound (CCRB) for the localization (i.e., position and orientation estimation) performance, based on which we define the localization coverage metrics. Then, we derive the communication key performance indicators (KPIs) including instantaneous signal-to-noise ratio, outage probability, and ergodic capacity, and define the corresponding coverage metrics. To facilitate localization applications using 3D arrays, a maximum likelihood-based algorithm for joint user equipment (UE) position and orientation estimation is proposed, which is initialized by a least squares-based solution. Our numerical results show that the 3D array configuration offers overall higher coverage than the planar array w.r.t. both localization and communication KPIs, although with minor performance loss in certain UE positions and orientations. The proposed localization algorithm is also verified to be efficient in simulations as it attains the derived CCRB.

Reconfigurable intelligent surface (RIS)-assisted localization has attracted extensive attention as it can enable and enhance localization services in extreme scenarios. However, most existing works treat RISs as anchors with known positions and orientations, which is not realistic in applications with mobile or uncalibrated RISs. This work considers thejoint RIS calibration and user positioning(JrCUP) problem with an active RIS. We propose a novel two-stage method to solve the considered JrCUP problem. The first stage comprises a tensor-estimation of signal parameters via rotational invariance techniques (tensor-ESPRIT), followed by a channel parameters refinement using least-squares. In the second stage, a two-dimensional search algorithm is proposed to estimate the three-dimensional user and RIS positions, one-dimensional RIS orientation, and clock bias from the estimated channel parameters. The Cramér-Rao lower bounds of the channel parameters and localization parameters are derived to verify the effectiveness of the proposed tensor-ESPRIT-based algorithms. In addition, simulation results reveal that the active RIS can significantly improve the localization performance compared to the passive case under the same system power supply in practical regions. Moreover, we observe the presence of blind areas with limited JrCUP localization performance, which can be mitigated by either leveraging more prior information or deploying extra base stations.

This paper studies the sidelink positioning problem in a near-field wireless communication scenario with a single active reconfigurable intelligent surface (RIS). In this task, the positions of the transmitter and the receiver, as well as the clock bias between them are estimated jointly. To solve this problem, a time-orthogonal random codebook is adopted, which makes different channels separable. Then, we propose a coarse positioning method based on the sub-RIS division and the far-field approximation, followed by a least-squares-based refinement. The Cramér-Rao lower bound (CRLB) is derived, which verifies the efficiency of the proposed algorithms. The simulation studies reveal: (i) positioning performance is largely affected by the RIS size and the transmission power; (ii) the power allocation between the transmitter and the active RIS has an impact on the positioning accuracy, and there exists an optimal power allocation ratio that minimizes the CRLB.

In 5G/6G wireless systems, reconfigurable intelligent surfaces (RIS) can play a role as a passive anchor to enable and enhance localization in various scenarios. However, most existing RIS-aided localization works assume that the geometry of the RIS is perfectly known, which is not realistic in practice due to calibration errors. In this work, we derive the misspecified Cramér-Rao bound (MCRB) for a single-input-single-output RIS-aided localization system with RIS geometry mismatch. Specifically, unlike most existing works that use numerical methods, we propose a closed-form solution to the pseudo-true parameter determination problem for MCRB analysis. Simulation results demonstrate the validity of the derived pseudo-true parameters and MCRB, and show that the RIS geometry mismatch causes performance saturation in the high signal-to-noise ratio regions.

Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization in a semi-passive manner. In this paper, we consider a static user equipped with an RIS and study the RIS localization problem (i.e., joint three-dimensional position and orientation estimation), when operating in a system comprising a single-antenna transmitter and multiple synchronized single-antenna receivers with known locations. We present a multi-stage estimator using time-of-arrival and spatial frequency measurements, and derive the Cramér-Rao lower bounds for the estimated parameters to validate the estimator's performance. Our simulation results demonstrate the efficiency of the proposed RIS state estimation approach under various system operation parameters.

Networks in 5G and beyond utilize millimeter wave (mmWave) radio signals, large bandwidths, and large antenna arrays, which bring opportunities in jointly localizing the user equipment and mapping the propagation environment, termed as simultaneous localization and mapping (SLAM). Existing approaches mainly rely on delays and angles, and ignore the Doppler, although it contains geometric information. In this paper, we study the benefits of exploiting Doppler in SLAM through deriving the posterior Cramér-Rao bounds (PCRBs) and formulating the extended Kalman-Poisson multi-Bernoulli sequential filtering solution with Doppler as one of the involved measurements. Both theoretical PCRB analysis and simulation results demonstrate the efficacy of utilizing Doppler.

Radio localization is a key enabler for joint communication and sensing in the fifth/sixth generation (5G/6G) communication systems. With the help of multipath components (MPCs), localization and mapping tasks can be done with a single base station (BS) and single unsynchronized user equipment (UE) if both of them are equipped with an antenna array. However, the antenna array at the UE side increases the hardware and computational cost, preventing localization functionality. In this work, we show that with Doppler estimation and MPCs, localization and mapping tasks can be performed even with a single-antenna mobile UE. Furthermore, we show that the localization and mapping performance will improve and then saturate at a certain level with an increased UE speed. Both theoretical Cramér-Rao bound analysis and simulation results show the potential of localization under mobility and the effectiveness of the proposed localization algorithm.

Radio localization is applied in high-frequency (e.g., mmWave and THz) systems to support communication and to provide location-based services without extra infrastructure. For solving localization problems, a simplified, stationary, narrowband far-field channel model is widely used due to its compact formulation. However, with increased array size in extra-large multiple-input-multiple-output (XL-MIMO) systems and increased bandwidth at upper mmWave bands, the effect of channel spatial non-stationarity (SNS), spherical wave model (SWM), and beam squint effect (BSE) cannot be ignored. In this case, localization performance will be affected when an inaccurate channel model deviating from the true model is adopted. In this work, we employ the misspecified Cramer-Rao lower bound to lower bound the localization error using a simplified mismatched model while the observed data is governed by a more complex true model. The simulation results show that among all the model impairments, the SNS has the least contribution, the SWM dominates when the distance is small compared to the array size, and the BSE has a more significant effect when the distance is much larger than the array size.

We address the localization of a reconfigurable intelligent surface (RIS) for a single-input single-output multi-carrier system using bi-static sensing between a fixed transmitter and a fixed receiver. Due to the deployment of RISs with a large dimension, near-field (NF) scenarios are likely to occur, especially for indoor applications, and are the focus of this work. We first derive the Cramér-Rao bounds (CRBs) on the estimation error of the RIS position and orientation and the time of arrival (TOA) for the path transmitter-RIS-receiver. We propose a multi-stage low-complexity estimator for RIS localization purposes. In this proposed estimator, we first perform a line search to estimate the TOA. Then, we use the far-field approximation of the NF signal model to implicitly estimate the angle of arrival and the angle of departure at the RIS center. Finally, the RIS position and orientation estimate are refined via a quasi-Newton method. Simulation results reveal that the proposed estimator can attain the CRBs. We also investigate the effects of several influential factors on the accuracy of the proposed estimator like the RIS size, transmitted power, system bandwidth, and RIS position and orientation.

This paper considers the problem of estimating the position and orientation of a user equipped with a three-dimensional (3D) array receiving downlink far-field THz signals from multiple base stations with known positions and orientations. We derive the Cramér-Rao Bound for the localization problem and define the coverage of the considered system. We compare the error lower bound distributions of the conventional planar array and the 3D array configurations at different user equipment (UE) positions and orientations. Our numerical results obtained for array configurations with an equal number of elements show very limited coverage of the planar-array configuration, especially across the UE orientation range. Conversely, a 3D array configuration offers an overall higher coverage with minor performance loss in certain UE positions and orientations.

Reconfigurable intelligent surfaces (RISs) are expected to be a key component enabling the mobile network evolution towards a flexible and intelligent 6G wireless platform. In most of the research works so far, RIS has been treated as a passive base station (BS) with a known state, in terms of its location and orientation, to boost the communication and/or terminal positioning performance. However, such performance gains cannot be guaranteed anymore when the RIS state is not perfectly known. In this paper, by taking the RIS state uncertainty into account, we formulate and study the performance of a joint RIS calibration and user positioning (JrCUP) scheme. From the Fisher information perspective, we formulate the JrCUP problem in a network-centric single-input multiple-output (SIMO) scenario with a single BS, and derive the analytical lower bound for the states of both user and RIS. We also demonstrate the geometric impact of different user locations on the JrCUP performance while also characterizing the performance under different RIS sizes. Finally, the study is extended to a multiuser scenario, shown to further improve the state estimation performance.

A popular approach to estimate a source location using time difference of arrival (TDOA) measurements is to construct an objective function based on the maximum likelihood (ML) method. An iterative algorithm can be employed to minimize that objective function. The main challenge in this optimization process is the non-convexity of the objective function, which precludes the use of many standard convex optimization tools. Usually, approximations, such as convex relaxation, are applied, resulting in performance loss. In this work, we take advantage of difference-of-convex (DC) programming tools to develop an efficient solution to the ML TDOA localization problem. We show that, by using a simple trick, the objective function can be modified into an exact difference of two convex functions. Hence, tools from DC programming can be leveraged to carry out the optimization task, which guarantees convergence to a stationary point of the objective function. Simulation results show that, when initialized within the convex hull of the anchors, the proposed TDOA localization algorithm outperforms a number of benchmark methods, behaves as an exact ML estimator, and indeed achieves the Cramér-Rao lower bound.

Gestures are effective tools for expressing emotions and conveying information to the environment. Sequence matching and machine-learning based algorithm are two main methods to recognize continuous gestures. Machine-learning based recognition systems are not flexible to new gestures because the models have to be trained again. On the other hand, the computational time that matching methods required increases with the complexity and the class of the gestures. In this work, we propose a decomposition approach for complex gesture recognition utilizing DTW and prefix tree. This system can recognize 100 gestures with an accuracy of 97.38%.