The massive number of Internet-of-Things (IoT) devices generates a hard-to-manage volume of data. Cloud-centric processing approaches for the IoT data suffer from high and unpredictable network latency, which causes poor experience in real-time IoT applications, such as healthcare. To address this issue, in edge computing, the data inference starts from the data source (i.e., the IoT devices). However, the constrained computational capabilities of the IoT device and the power-hungry data transmission demand a tradeoff between onboard processing and computation offloading. Hence, the IoT information inference requires efficient and lightweight techniques that are tailored for this tradeoff and respect the constrained resources on IoT devices, such as wearables. This article presents a hierarchical classification approach that decomposes the problem into three classifiers in two hierarchy layers. In the first layer, a lightweight classifier executes directly on the IoT device and decides whether to offload the computation to the gateway or to perform it onboard. The second layer comprises a lightweight classifier on the IoT device (can only distinguish a subset of classes) and a complex classifier on the gateway (to distinguish the remaining classes). The experimental results (using a real-world data set for human activity recognition and implemented on a wearable IoT device) show higher accuracy (92% on average) than a nonhierarchical classifier (87% on average). The execution time and power measurements on the IoT device show $3\times $ energy saving for the classification.

In the emerging paradigm of edge computing (EC) for Internet of Things (IoT), data processing is pushed to the edge of the IoT network (e.g., gateways and embedded IoT devices). IoT devices must support multiple operation modes in order to adapt to varying runtime situations, like preserving energy at low battery, while still maintaining some crucial functionality, etc. Adapting the optimal operation mode is a challenge for edge devices given the limited resources at the edge of the network (both bandwidth and processing power of the shared gateway), various constraints (e.g., battery lifetime), etc. This paper proposes a fast and low-overhead scheme to determine and adapt the operation mode of edge devices at runtime and orchestrate devices in a way that the efficiency of IoT devices is optimized with respect to the gateway's resource constraints. The proposed scheme breaks the optimization problem into several smaller ones (i.e., subproblems) whose solutions are aggregated to find the final solution. We present a novel memoization technique that determines the solution to a range of subproblems based on subproblems that are already solved. In addition, we present a novel pruning technique that reduces the search space and consequently reduces both memory and execution time overhead. The experimental results show up to 50% reduction in memory overhead and 14× reduction in execution time overhead compared to the state-of-the-art solution which is a major step toward efficient EC for IoT.

Resource management is a key technique for efficiently operating devices in Internet of Things (IoT). In this paper, we propose DMRM, a new algorithm based on economic and pricing models for dynamic resource management of IoT networks under CPU, memory, bandwidth and latency constraints. We use a supply and demand model, smart data pricing and perceived valued pricing, implementing a marketplace where IoT devices and Gateways buy and sell computing and communication resources necessary for task execution. Our new market-based algorithm is compared to relevant approaches showing that it not only reaches near-optimal results, but also, its scalable, distributed nature leads to three orders of magnitude lower execution requirements compared to centralized approaches.

With the numerous Internet of Things (IoT) devices, the cloud-centric data processing fails to meet the requirement of all IoT applications. The limited computation and communication capacity of the cloud necessitate the edge computing, i.e., starting the IoT data processing at the edge and transforming the connected devices to intelligent devices. Machine learning (ML) the key means for information inference, should extend to the cloud-to-things continuum too. This paper reviews the role of ML in IoT from the cloud down to embedded devices. Different usages of ML for application data processing and management tasks are studied. The state-of-the-art usages of ML in IoT are categorized according to their application domain, input data type, exploited ML techniques, and where they belong in the cloud-to-things continuum. The challenges and research trends toward efficient ML on the IoT edge are discussed. Moreover, the publications on the “ML in IoT” are retrieved and analyzed systematically using ML classification techniques. Then, the growing topics and application domains are identified.

The massive increase of IoT devices and their collected data raises the question of how to analyze all that data. Edge computing provides a suitable compromise, but the question remains: How much processing should be done locally vs. offloaded to other devices? The diverse application requirements and limited resources at the edge extend the challenges. We propose Oops , an optimization framework to adapt the resource management at runtime distributedly. It orchestrates the IoT devices and adapts their operation mode with respect to their constraints and the gateway’s limited shared resources. Oops reduces runtime overhead significantly while increasing user utility compared to state-of-the-art.

In this paper we present an efficient and accurate algorithm for epileptic seizure prediction on low-power and portable IoT devices. State-of-the-art algorithms suffer from two issues: computation intensive features and large internal memory requirement, which make them inapplicable for constrained devices. We reduce the memory requirement of our algorithm by reducing the size of data segments (i.e. the window of input stream data on which the processing is performed), and the number of required EEG channels. To respect the limitations of the processing capability, we reduce the complexity of our exploited features by only considering the simple features, which also contributes to reducing the memory requirements. Then, we provide new relevant features to compensate the information loss due to the simplifications (i.e. less number of channels, simpler features, shorter segment, etc.). We measured the energy consumption (12.41 mJ) and execution time (565 ms) for processing each segment (i.e. 5.12 seconds of EEG data) on a low-power MSP432 device. Even though the state-of-art does not fit to IoT devices, we evaluate the classification performance and show that our algorithm achieves the highest AUC score (0.79) for the held-out data and outperforms the state-of-the-art.

The Internet-of-Things (IoT) envisions an infrastructure of ubiquitous networked smart devices offering advanced monitoring and control services. The current art in IoT architectures utilizes gateways to enable application-specific connectivity to IoT devices. In typical configurations, IoT gateways are shared among several IoT edge devices. Given the limited available bandwidth and processing capabilities of an IoT gateway, the service quality (SQ) of connected IoT edge devices must be adjusted over time not only to fulfill the needs of individual IoT device users but also to tolerate the SQ needs of the other IoT edge devices sharing the same gateway. However, having multiple gateways introduces an interdependent problem, the binding, i.e., which IoT device shall connect to which gateway. In this article, we jointly address the binding and allocation problems of IoT edge devices in a multigateway system under the constraints of available bandwidth, processing power, and battery lifetime. We propose a distributed trade-based mechanism in which after an initial setup, gateways negotiate and trade the IoT edge devices to increase the overall SQ. We evaluate the efficiency of the proposed approach with a case study and through extensive experimentation over different IoT system configurations regarding the number and type of the employed IoT edge devices. Experiments show that our solution improves the overall SQ by up to 56% compared to an unsupervised system. Our solution also achieves up to 24.6% improvement on overall SQ compared to the state-of-the-art SQ management scheme, while they both meet the battery lifetime constraints of the IoT devices.

Recent advances in technologies have allowed the design of small-size low-power and low-cost devices that can be connected to the Internet, enabling the emerging paradigm of Internet-of-things (IoT). IoT covers an ever-increasing range of applications, e.g., health-care monitoring, smart homes and buildings, etc. In this invited paper, we discuss and summarize the IoT paradigm with a special focus on energy consumption and methodologies for its minimization. Furthermore, we also discuss about reliability in the context of IoT devices. In all, this paper attempts to be a starting point for readers interested in developing energy-efficient IoT devices.