An analytical procedure is developed to calculate delay and throughput performance of CSMA/PA (carrier sense multiple access with priority acknowledgments). Time-axis slotting and Markov chain analysis are used to determine the channel backlog per cycle. A cycle includes information packet access and transmission time followed by acknowledgment transmission or time-out. Throughput and delay performance are then calculated in terms of the number of network terminals, the network packet error probability, the packet generation rate, and the mean information packet retransmission delay. Fixed-length information and acknowledgment packets are assumed. Calculated results show excellent agreement with measured delay and throughput performance for two distinct five-node intrabuilding power line networks operating at data rates from 1.2 to 9.6 kb/s.>

Intrabuilding power lines provide a readily available and easily accessed network for personal computer (PC) communications within buildings. The use and performance of carrier-sense multiple access with priority acknowledgements (CSMA/PA) on such networks is described. The communication characteristics of intrabuilding power-line channels are summarized and found to suffer from highly variable and unpredictable signal-to-noise ratios and bit-error rates. The advantages of CSMA/PA relative to polling and token-passing access protocols are discussed. The architecture of a CSMA/PA implementation is described. The choice of the best data-link packet length is determined from throughput measurements to be approximately 1000 bits. Delay-throughput performance is measured at 1.2, 2.4, 4.8, and 9.6 kb/s using a phase-shift-keyed (PSK) spread-spectrum modem. Results are included for the potentially difficult problem of transmission across power phases. A discussion of results obtained and their implications for PC intrabuilding communications is also included.>