Internet of Things (IoT) devices have become an integral part of our lives and are increasingly used in almost every field. Subsequently, there are a large number of latency-sensitive IoT applications (e.g., face recognition and autonomous driving) targeted for mobile edge computing environments. These IoT applications are often split into multiple collaborative tasks and offloaded onto containers or virtual machines (VMs) with certain failure rates and recovery rates. If these containers or VMs are not deployed in the same edge servers, the bandwidth resources of edge clouds must be consumed to transfer data. These factors increase the completion time of IoT applications to different degrees, and then affect their reliability level. Therefore, there exists equilibrium between the reliability level and bandwidth consumption. In this article, we investigate the equilibrium of minimizing the bandwidth consumption of IoT applications while maximizing the reliability level of these IoT applications during task offloading. We propose a multiobjective optimization problem, and transform it to a single-objective optimization problem. Furthermore, we introduce two efficient approaches to acquire two near-optimal solutions. The results of simulation experiments demonstrate that our proposed approaches can observably enhance the reliability level and reduce the bandwidth consumption of IoT applications compared with other related approaches. Meanwhile, we also make a comparative analysis of our proposed approaches.

In some special circumstances, e.g. tsunamis, floods, battlefields, earthquakes, etc., communication infrastructures are damaged or non-existent, as well as unmanned aerial vehicle (UAV) cluster. For the communication between people or UAVs, UAVs or mobile smart devices (MSDs) can be used to construct Mobile Ad Hoc Networks (MANETs), and Multipath TCP (MPTCP) can be used to simultaneously transmit in one TCP connection via multiple interfaces of MSDs. However the original MPTCP subpaths creating algorithm can establish multiple subpaths between two adjacent nodes, thus cannot achieve true concurrent data transmission. To solve this issue, we research and improve both the algorithm of adding routing table entries and the algorithm of establishing subpaths to offer more efficient use of multiple subpaths and better network traffic load balancing. The main works are as follows: (1) improve multi-hop routing protocol; (2) run MPTCP on UAVs or MSDs; (3) improve MPTCP subpaths establishment algorithm. The results show that our algorithms have better performance than the original MPTCP in achieving higher data throughput.

In some special circumstances, e.g. tsunamis, floods, battlefields, earthquakes, etc., communication infrastructures are damaged or non-existent, as well as unmanned aerial vehicle (UAV) cluster. For the communication between people or UAVs, UAVs or mobile smart devices (MSDs) can be used to construct Mobile Ad Hoc Networks (MANETs), and Multipath TCP (MPTCP) can be used to simultaneously transmit in one TCP connection via multiple interfaces of MSDs. However the original MPTCP subpaths creating algorithm can establish multiple subpaths between two adjacent nodes, thus cannot achieve true concurrent data transmission. To solve this issue, we research and improve both the algorithm of adding routing table entries and the algorithm of establishing subpaths to offer more efficient use of multiple subpaths and better network traffic load balancing. The main works are as follows: (1) improve multi-hop routing protocol; (2) run MPTCP on UAVs or MSDs; (3) improve MPTCP subpaths establishment algorithm. The results show that our algorithms have better performance than the original MPTCP in achieving higher data throughput.

In some special circumstances, such as earthquakes, tsunamis and floods, etc. Infrastructure communication facilities are damaged, all communications are interrupted. For the communication between peoples, Android smartphones can be used to construct Mobile Ad Hoc Networks (MANETs). To improve the work efficiency, it is necessary to run the Information Systems (Android Applications) in MANETs, therefore the distribution of information becomes convenient. However, it is very hard to get a real MANET environment to test Android Applications, and so far, we have not found any MANETs simulation environments which can be used to test actual Android Applications. Therefore, we propose a Simulation Experimental Environment for Android Applications in MANETs (SEEM). The test results show that the SEEM is practicable to test Android Applications in MANETs. We believe that the SEEM will be beneficial to the researchers and developers who need to develop and test actual Android Applications in MANETs.