Event cameras are bio-inspired vision sensors that output pixel-level brightness changes instead of standard intensity frames. These cameras do not suffer from motion blur and have a very high dynamic range, which enables them to provide reliable visual information during high-speed motions or in scenes characterized by high dynamic range. These features, along with a very low power consumption, make event cameras an ideal complement to standard cameras for VR/AR and video game applications. With these applications in mind, this paper tackles the problem of accurate, low-latency tracking of an event camera from an existing photometric depth map (i.e., intensity plus depth information) built via classic dense reconstruction pipelines. Our approach tracks the 6-DOF pose of the event camera upon the arrival of each event, thus virtually eliminating latency. We successfully evaluate the method in both indoor and outdoor scenes and show that-because of the technological advantages of the event camera-our pipeline works in scenes characterized by high-speed motion, which are still inaccessible to standard cameras.

Event cameras are bioinspired vision sensors that output pixel-level brightness changes instead of standard intensity frames. They offer significant advantages over standard cameras, namely a very high dynamic range, no motion blur, and a latency in the order of microseconds. However, due to the fundamentally different structure of the sensor's output, new algorithms that exploit the high temporal resolution and the asynchronous nature of the sensor are required. Recent work has shown that a continuous-time representation of the event camera pose can deal with the high temporal resolution and asynchronous nature of this sensor in a principled way. In this paper, we leverage such a continuous-time representation to perform visual-inertial odometry with an event camera. This representation allows direct integration of the asynchronous events with microsecond accuracy and the inertial measurements at high frequency. The event camera trajectory is approximated by a smooth curve in the space of rigid-body motions using cubic splines. This formulation significantly reduces the number of variables in trajectory estimation problems. We evaluate our method on real data from several scenes and compare the results against ground truth from a motion-capture system. We show that our method provides improved accuracy over the result of a state-of-the-art visual odometry method for event cameras. We also show that both the map orientation and scale can be recovered accurately by fusing events and inertial data. To the best of our knowledge, this is the first work on visual-inertial fusion with event cameras using a continuous-time framework.

We address one of the main challenges towards autonomous quadrotor flight in complex environments, which is flight through narrow gaps. While previous works relied on off-board localization systems or on accurate prior knowledge of the gap position and orientation in the world reference frame, we rely solely on onboard sensing and computing and estimate the full state by fusing gap detection from a single onboard camera with an IMU. This problem is challenging for two reasons: (i) the quadrotor pose uncertainty with respect to the gap increases quadratically with the distance from the gap; (ii) the quadrotor has to actively control its orientation towards the gap to enable state estimation (i.e., active vision). We solve this problem by generating a trajectory that considers geometric, dynamic, and perception constraints: during the approach maneuver, the quadrotor always faces the gap to allow state estimation, while respecting the vehicle dynamics; during the traverse through the gap, the distance of the quadrotor to the edges of the gap is maximized. Furthermore, we replan the trajectory during its execution to cope with the varying uncertainty of the state estimate. We successfully evaluate and demonstrate the proposed approach in many real experiments, achieving a success rate of 80% and gap orientations up to 45°. To the best of our knowledge, this is the first work that addresses and achieves autonomous, aggressive flight through narrow gaps using only onboard sensing and computing and without prior knowledge of the pose of the gap.

New vision sensors, such as the Dynamic and Active-pixel Vision sensor (DAVIS), incorporate a conventional camera and an event-based sensor in the same pixel array. These sensors have great potential for robotics because they allow us to combine the benefits of conventional cameras with those of event-based sensors: low latency, high temporal resolution, and high dynamic range. However, new algorithms are required to exploit the sensor characteristics and cope with its unconventional output, which consists of a stream of asynchronous brightness changes (called “events”) and synchronous grayscale frames. In this paper, we present a low-latency visual odometry algorithm for the DAVIS sensor using event-based feature tracks. Features are first detected in the grayscale frames and then tracked asynchronously using the stream of events. The features are then fed to an event-based visual odometry algorithm that tightly interleaves robust pose optimization and probabilistic mapping. We show that our method successfully tracks the 6-DOF motion of the sensor in natural scenes. This is the first work on event-based visual odometry with the DAVIS sensor using feature tracks.

We propose an algorithm to estimate the “lifetime” of events from retinal cameras, such as a Dynamic Vision Sensor (DVS). Unlike standard CMOS cameras, a DVS only transmits pixel-level brightness changes (“events”) at the time they occur with micro-second resolution. Due to its low latency and sparse output, this sensor is very promising for high-speed mobile robotic applications. We develop an algorithm that augments each event with its lifetime, which is computed from the event's velocity on the image plane. The generated stream of augmented events gives a continuous representation of events in time, hence enabling the design of new algorithms that outperform those based on the accumulation of events over fixed, artificially-chosen time intervals. A direct application of this augmented stream is the construction of sharp gradient (edge-like) images at any time instant. We successfully demonstrate our method in different scenarios, including high-speed quadrotor flips, and compare it to standard visualization methods.

This paper describes an open-source implementation of an event-based dynamic and active pixel vision sensor (DAVIS) for racing human vs. computer on a slot car track. The DAVIS is mounted in "eye-of-god" view. The DAVIS image frames are only used for setup and are subsequently turned off because they are not needed. The dynamic vision sensor (DVS) events are then used to track both the human and computer controlled cars. The precise control of throttle and braking afforded by the low latency of the sensor output enables consistent outperformance of human drivers at a laptop CPU load of <;3% and update rate of 666Hz. The sparse output of the DVS event stream results in a data rate that is about 1000 times smaller than from a frame-based camera with the same resolution and update rate. The scaled average lap speed of the 1/64 scale cars is about 450km/h which is twice as fast as the fastest Formula 1 lap speed. A feedbackcontroller mode allows competitive racing by slowing the computer controlled car when it is ahead of the human. In tests of human vs. computer racing the computer still won more than 80% of the races.

We present an accurate, efficient, and robust pose estimation system based on infrared LEDs. They are mounted on a target object and are observed by a camera that is equipped with an infrared-pass filter. The correspondences between LEDs and image detections are first determined using a combinatorial approach and then tracked using a constant-velocity model. The pose of the target object is estimated with a P3P algorithm and optimized by minimizing the reprojection error. Since the system works in the infrared spectrum, it is robust to cluttered environments and illumination changes. In a variety of experiments, we show that our system outperforms state-of-the-art approaches. Furthermore, we successfully apply our system to stabilize a quadrotor both indoors and outdoors under challenging conditions. We release our implementation as open-source software.

In the last few years, we have witnessed impressive demonstrations of aggressive flights and acrobatics using quadrotors. However, those robots are actually blind. They do not see by themselves, but through the “eyes” of an external motion capture system. Flight maneuvers using onboard sensors are still slow compared to those attainable with motion capture systems. At the current state, the agility of a robot is limited by the latency of its perception pipeline. To obtain more agile robots, we need to use faster sensors. In this paper, we present the first onboard perception system for 6-DOF localization during high-speed maneuvers using a Dynamic Vision Sensor (DVS). Unlike a standard CMOS camera, a DVS does not wastefully send full image frames at a fixed frame rate. Conversely, similar to the human eye, it only transmits pixel-level brightness changes at the time they occur with microsecond resolution, thus, offering the possibility to create a perception pipeline whose latency is negligible compared to the dynamics of the robot. We exploit these characteristics to estimate the pose of a quadrotor with respect to a known pattern during high-speed maneuvers, such as flips, with rotational speeds up to 1,200 °/s. Additionally, we provide a versatile method to capture ground-truth data using a DVS.

Although thousands of Chinese characters exist, they can be constructed from a limited number of single strokes. In Chinese calligraphy these strokes are combined into a full character in a fluid way. Therefore Chinese calligraphy provides an interesting problem to study learning mechanisms such as how to automatically construct complex tasks (full characters) from previously learned simpler ones (single strokes) (Fig. 1). The goal of this project is that a robot should be able to decide which previously learned strokes or characters to use for drawing a newly presented character and to improve its drawing over several iterations.