Debug time has become a major issue in post silicon debug because of the increasingly complicated nature of circuit design. However, reducing debug time is a major challenge because of the limited size of the trace buffer used to observe internal signals in the circuit. This study proposes an on-chip error detection method to overcome this challenge. The on-chip process detects the error-suspect window using the pre-calculated golden data stored in the trace buffer. This allows the selective compaction and capture of the debug data in the trace buffer during the error-containing interval. As a result, reducing the number of debug sessions significantly reduces the total debug time. The experimental results on various debug cases show significant reductions in total debug time compared to previous work.

This paper proposes a new network-on-chip (NoC)-reused test access mechanism (TAM) for testing multiple identical cores. It can test multiple cores concurrently and identify faulty cores to derate the chip by excluding the core. In order to minimize the test time, the TAM utilizes the majority value of test response data. All of the cores can thereby be tested in parallel and test costs (in both test pins and test time) are exactly the same as those for a single core. The hardware overhead is minimized by reusing the NoC infrastructures and transfer-counters are designed as a majority analyzer. The experimental results in this paper show that the proposed TAM can test multiple cores in the same time as a single core and with negligible hardware overhead.

The increased use of multicore chips diminishes per-core complexity and also demands parallel design and test technologies. An especially important evolution of the multicore chip has been the use of multiple identical cores, providing a homogenous system with various merits. This paper introduces a novel test access mechanism (TAM) for parallel testing of multiple identical cores and identifying faulty cores to derate the chip by excluding it. Instead of typical test response data from the cores, the test output data used in this paper are the majority values, that is, the typical test responses from the cores. All the cores can thereby be tested in parallel and test costs (in both test pins and test time) are exactly the same as for a single core. The proposed TAM can be implemented with on-chip comparators and majority analyzers. The experimental results in this paper show that the proposed TAM can test multiple cores with minimal test pins and test time and with hardware overhead of <;0.1%.

This paper proposes a new parallel test access strategy for multiple identical cores in a network-on-chip (NoC). The proposed test strategy takes advantage of the regular design of NoC to reduce both test area overhead and test time. The proposed NoC reused test access mechanism (TAM) adopted a pipelining structure and a deterministic test data routing algorithm in order to reuse the full bandwidth of links in the NoC. Also, the architecture has complete scalability according to the number of cores and applications for 3D environment are also represented. Experimental results show that the proposed TAM can test multiple cores with the same test time as a single core and negligible hardware overhead.

As memory capacity and density grow, a corresponding increase in the number of defects decreases the yield and quality of embedded memories for systems-on-chip as well as commodity memories. For embedded memories, built-in redundancy analysis (BIRA) is widely used to solve quality and yield issues by replacing faulty cells with healthy redundant cells. Many BIRA approaches require extra hardware overhead in order to achieve optimal repair rates, or they suffer a loss of repair rate in minimizing the hardware overhead. An innovative BIRA approach is proposed to achieve optimal repair rates, lower area overhead, and increase analysis speed. The proposed BIRA minimizes area overhead by eliminating some storage coverage for only must-repair faulty information. The proposed BIRA analyzes redundancies quickly and efficiently by evaluating all nodes of a branch in parallel with a new analyzer which is simple and easy-to-implement. Experimental results show that the proposed BIRA allows for a much faster analysis speed than that of the state-of-the-art BIRA, as well as the optimal repair rate, and relatively small area overhead.