Dynamic traffic patterns and shifts in traffic distribution in Open Radio Access Networks (O-RAN) pose a significant challenge for real-time network optimization in 5G and beyond. Traditional traffic analytics methods struggle to remain accurate under such non-stationary conditions, where models trained on historical data quickly degrade as traffic evolves. This paper introduces AIDITA, an AI-driven Digital Twin for Traffic Analytics framework designed to solve this problem through autonomous model adaptation. AIDITA creates a digital replica of the live analytics models running in the RAN Intelligent Controller (RIC) and continuously updates them within the digital twin using incremental learning. These updates use real-time Key Performance Metrics (KPMs) from the live network, augmented with synthetic data from a Generative AI (GenAI) component to simulate diverse network scenarios. Combining GenAI-driven augmentation with incremental learning enables traffic analytics models, such as prediction or anomaly detection, to adapt continuously without the need for full retraining, preserving accuracy and efficiency in dynamic environments. Implemented and validated on a real-world 5G testbed, our AIDITA framework demonstrates significant improvements in traffic prediction and anomaly detection use cases under distribution shifts, showcasing its practical effectiveness and adaptability for real-time network optimization in O-RAN deployments.

UWB TDoA localization accuracy degrades in industrial non-line-of-sight (NLOS) environments, where traditional methods of excluding NLOS links are often infeasible and degrade geometric precision. To address these limitations, we propose a novel position correction method using a transformer encoder. The model directly processes raw channel impulse responses (CIRs) from all available anchors by first partitioning them into patches. These patches are converted into tokens and combined with novel spatial positional encodings before the transformer learns their complex interdependencies to compute a final position correction. We analyze multiple patching and encoding strategies to evaluate their impact on performance and scalability. Based on experiments on real-world UWB measurements, our approach can provide accuracies of up to 0.39 m in a complex environment consisting of (almost) only NLOS signals, which is an improvement of 73.6% compared to the TDOA baseline.

Ultra-wideband (UWB) localization systems commonly rely on Two-Way Ranging (TWR) or Time Difference of Arrival (TDoA) techniques, each associated with its strengths and limitations. While TWR offers accurate ranging without clock synchronization, it requires frequent packet exchanges. In contrast, TDoA enables scalable, low-latency localization but suffers from synchronization and multipath-induced errors. Although many error correction approaches have been proposed for TWR, scientific work on error correction for TDoA is lacking. In this work, we propose a hybrid learning-based approach that leverages data collected from TWR systems to enhance time of arrival (ToA) error correction in TDoA-based localization. The motivation behind this strategy is: (1) labeled TWR datasets are more readily available in the scientific community, and (2) obtaining accurate error labels in real-life conditions for TWR is significantly easier than for TDoA. To this end, we train a convolutional neural network (CNN) using channel impulse response (CIR)s and their corresponding ranging error labels from a TWR system. Once trained, the model is applied directly, without retraining or fine-tuning to CIRs captured in a TDoA setup. Experimental results demonstrate that existing error correction approaches, such as anchor node selection, fail when encountering strong multipath environments, with 11.6% of positions not being calculated due to the removal of too many CIRs. In contrast, our approach enables significant gains in positioning accuracy in dense multipath environments, where only a limited number of signals are received.

Autonomous Network enablers for a 5G Network-on-Wheels are investigated, with a field-trial for a Communication Service Provider. The objective was to devise solutions to reduce time spent on network life cycle tasks, such as network function validation, system commission and service deployment. The field trial revealed significant data collection and analysis challenges even with a single cell campaign, this suggests severe costs with public-network scales. The work contributes a new architecture for experiments and optimisation of observability strategies with algorithms in 5G networks. This work helps operators more effectively denlov 5G networks and services.

Deep Learning based Radio Frequency Fingerprint Identification (DL-RFFI) systems are emerging as a vital technology for Internet-of-Things (IoT) device authentication at the physical layer. It exploits the hardware impairments in the analog front-end components of the transmitter as the identifying features. However, the DL-RFFI system struggles to generalize in unseen domains, i.e., when trained at closer distances and tested at longer distances, the DL-RFFI shows significant performance degradation. In this paper, we design a 1D Convolutional Neural Network (1D-CNN) based DL-RFFI system, mainly focused on a multi-distance scenario. We use Long-Range (LoRa) technology as our case study and collect LoRa RF data at multiple distances from 5 to 30m. We train our model using several signal representation methods, namely, raw In-phase and Quadrature (IQ), frequency domain (FFT), and a combination of both. In addition, we also present a fusion model based on additional features extracted from IQ data using an open-source feature extraction library. Our experimental results show that our fusion model can achieve higher device identification accuracy of over 91% on unseen distance (25 and 30m) data when the model is trained on data from 5 to 20m only.

Machine learning data privacy has been improved with Federated Learning approaches. However, some obstacles to guaranteeing traceability, openness, and participant contribution incentives prevent its widespread use. In this study, Ethereum blockchain technology is integrated into the data stream Kafka-ML framework, presenting a novel asynchronous and blockchain-based Federated Learning approach. By utilising Ethereum for transparent and auditable participant tracking, this integration overcomes some shortcomings such as auditability and model sharing reliability. Furthermore, Ethereum smart contracts allow for automatic reward distribution systems, which promote equitable incentive systems and increased involvement in the Federated Learning process. To demonstrate its potential, an extensive evaluation has been carried out on a wireless net-work technology detection use case. By improving transparency, traceability, and incentive structures of Federated Learning, it is expected to strengthen the robustness of flexible machine learning collaboration with data streams.

This paper proposes two approaches to significantly improve the detection rate of abnormal heartbeats in an Electrocardiogram (ECG) based deep learning heartbeat classifier. We introduce an automated feature selection procedure using the Kendall rank correlation coefficient to improve the performance of already existing classifier models. Further, we propose a methodology to cope with the class imbalance present in many ECG and other medical datasets by using a weighted loss function. The proposed methods demonstrate a significant improvement in the detection of Supraventricular Ectopic Beat (SVEB) and Ventricular Ectopic Beat (VEB) type heartbeats. Boasting an impressive 20% increase in terms of recall for the SVEB class when compared to state-of-the-art classifiers. This advancement could lead to more reliable and efficient tools for early arrhythmia detection, particularly beneficial in places where professional medical care is not easily accessible.

Indoor positioning using UWB has gained popularity due to its low cost while still providing centimeter-level accuracy. Currently, Convolutional Neural Network (CNN)-based approaches are often proposed for NLOS detection, error correction, etc. to make these UWB positioning systems more accurate. Transformer (TF) networks have shown to be a more capable alternative in several other domains, but have not been used for UWB fingerprinting. We present two novel TF-based approaches: one that processes channel impulse responses (CIR) directly, and a second one that uses cross-attention to incorporate anchor position information to improve geometric understanding. Moreover, we propose a second innovation by combining fingerprinting with a time calibration method that synchronizes the CIR data using a TDOA-based setup. This second innovation can be used with our novel approach, or with other state-of-the-art fingerprinting methods. The proposed models are evaluated in an industrial environment and outperform previous state-of-the-art CNNs in both LOS and NLOS situations, reaching accuracies with errors as low as 3 cm in real-life conditions, while having lower complexity and requiring fewer samples.

Addressing long-range dependencies in blind co-channel interference waveforms typically requires convolutional networks with large kernels or significant depth, which are resource-intensive. This paper presents a streamlined UNet architecture integrated with fast Fourier convolution blocks and a long short-term memory in the bottleneck, designed to efficiently capture these dependencies. By leveraging the Fourier domain for global feature processing, our architecture reduces the model's complexity without compromising performance. Compared to the leading benchmark model (a deep UNet), our approach yields a 26.5% improvement in mean square error, while reducing multiply-accumulate operations and the number of model parameters by 76.8% and 76.3% respectively, demonstrating a significant enhancement in both accuracy and efficiency for interference cancellation in constrained computational environments.

Ultra wideband (UWB) is a popular technology to address the need for high-precision indoor positioning systems in challenging industry 4.0 use cases. In line-of-sight (LOS) environments, UWB positioning errors in the order of 1–10 cm can be achieved. However, in non-line-of-sight (NLOS) conditions, this precision drops significantly, with errors typically >30 cm. Machine learning (ML) has been proposed to improve the precision in such NLOS conditions, but is typically environment-specific and lacks generalization to new environments and UWB configurations. As such, it is necessary to collect large data sets to train a neural network (NN) for each new environment or UWB configuration. To remedy this, this article proposes automatic optimizations for transfer learning (TL) deep NNs toward new environments and UWB configurations. We analyze error correction and (N)LOS classification models, using either feature- or channel impulse response (CIR)-based input data. Our TL solutions show a 50% error improvement and 15% (N)LOS classification accuracy improvement (for both feature- and CIR-based approaches) compared to a model trained in a different environment. We also analyze the impact on TL using a limited number of samples (25 to 400 samples). The highest accuracy is typically achieved by the CIR-based approach, where with only 50 samples from the new mixed (N)LOS environment, we show ±10 cm precision after error correction with 93% (N)LOS detection. The presented results demonstrate high-precision UWB localization (from 643 to 245 mm) through ML with minimal data collection effort in challenging NLOS environments.

This paper proposes a fully unsupervised technology recognition method using deep clustering for identifying wireless technologies to learn from raw data without requiring manual label annotations. Identifying and recognizing wireless technologies is important to realize effective spectrum management. Recent scientific publications utilized supervised deep learning with great success to train AI models to recognize different wireless technologies based on labeled RF signal datasets. However, assigning labels to wireless technology signal datasets for supervised deep learning is time consuming and may not always be practical. To remedy this issue, the proposed method combines an autoencoder and clustering layers, extended with a Gaussian Mixture Model, to learn low-dimensional salient features from raw IQ data and cluster them into distinct wireless technologies. The optimal input dimensions and performance of the method in different signal-to-noise ratio conditions are analyzed for a set of several different low-power wide area network (LPWAN) technologies: Sigfox, LoRa, IEEE 802.11ah, and IEEE 802.15.4g. Extensive simulations show that the proposed method for wireless technology recognition exhibits a recognition accuracy exceeding 90%, surpassing the performance of the state-of-the-art deep clustering algorithms by 4 to 5% in terms of accuracy.

Dynamic Spectrum Sharing (DSS) is an enabler for a seamless transition from 4G Long Term Evolution (LTE) to 5G New Radio (NR) by utilizing existing LTE bands without static spectrum re-farming. In this paper, we propose a cross-band DSS scheme that utilizes the Multimedia Broadcast Multicast Service over a Single Frequency Network (MBSFN) feature of an LTE network and the Multicast Broadcast Service (MBS) feature of an NR network. The proposed DSS scheme utilizes LTE and NR resource controllers to assign muted MBSFN subframes on the LTE band and muted MBS subframes on the NR band based on traffic needs. In contrast to the state-of-the-art, the proposed DSS scheme does not require a coordination signaling channel between the LTE and NR networks. Instead, a machine learning-based Technology Recognition and Traffic Characterization (TRTC) system is used to identify and characterize traffic patterns. The LTE and NR resource controllers use the TRTC to sense the muted subframes and offload traffic accordingly. On average, the proposed DSS, as compared to static band configuration, improves the LTE throughput, NR throughput, LTE band spectrum utilization efficiency, and NR band spectrum utilization efficiency by 13.5%, 8.3%, 11.8%, and 20.7%, respectively.

The need for supporting multimedia streaming services in cellular networks as standardized by 3GPP is expanding rapidly. Evolved Multimedia Broadcast Multicast Service (eM-BMS) was initially introduced in Release 9 and following releases have introduced several enhancements. Multimedia Broadcast Multicast Single Frequency Network (MBSFN) is one of the eMBMS enhancements targeting to reduce interference, however, its static parameter configuration yields inefficient resource allocation. Therefore, in this paper, an adaptive demand-driven MBSFN resource allocation algorithm is proposed aiming to efficiently utilize the radio resources. The algorithm flexibly assigns resources to multicast transmissions by varying MBSFN configuration parameters (the number and period of multicast subframes) and provides freed resources to unicast traffic. The proposed algorithm is implemented and evaluated using a Software Defined Radio platform which we made open source. As compared to the fixed MBSFN parameter configuration, our solution showcases an improvement of at least 24% and maximally by 40% in terms of multicast resource efficiency. Also, the total system throughput (multicast and unicast) improves by at least 4% and maximally by 24%.

With the ongoing push towards an automated Industry 4.0, data-driven intelligent algorithms are getting more attention. Warehouse operators have traditionally required human labor to identify and register their assets. Autonomous flying drones will help alleviate this task by flying through the warehouse and detecting assets. This can be done based on vision, requiring expensive and energy consuming hardware, limiting drone flight time. In contrast, we propose a solution using radio-frequency identification (RFID) tags and machine learned algorithms to localize assets, which does not require a well-lit environment and can be processed in an energy efficient way. Our machine learning model achieves a 92–93 % accuracy, even when the drone is flying at different heights than the assets. Additionally, the model is easily implementable on off-the-shelf and low-energy consuming embedded hardware. This data-driven solution can easily be retrained for different environments and allows cheap RFID-based horizontal localization of assets in warehouses of the future.

In this study, an energy-efficient self-organized framework for sub-channel allocation and power allocation is presented for ultra-dense small cell networks, which can operate in both licensed and unlicensed bands. In order to protect legacy WiFi devices (operating in unlicensed bands), we consider the Long-Term Evolution (LTE) operation in unlicensed bands based on Carrier Sense Adaptive Transmission (CSAT), in which 'ON' and 'OFF' duty cycle approach is utilized. On the other hand, there are severe interference management problems among small cells (operating in licensed and unlicensed bands) and between macro cells and small cells (operating in licensed bands) due to co-channel and ultra-dense deployment of small cells. This article proposes a self-organized optimization framework for the allocation of sub-channels and power levels by exploiting a non-cooperative game with the objective to maximize the energy efficiency of dual-access small cells without creating harmful impact on coexisting network entities including macro cell users, small cell users, and legacy WiFi devices. Simulation results show that the proposed scheme outperforms (6 and 11 percent) and (8 and 18 percent) the round-robin and the spectrum-efficient schemes, respectively, for two different small cell scenarios. In addition, it is shown that for less channel state information (CSI) estimation errors ς = 0.02, the maximum performance degradation of the proposed scheme is reasonably small (5.5 percent) as compared to the perfect CSI.

Recently, the operation of LTE in unlicensed bands has been proposed to cope with the ever-increasing mobile traffic demand. However, the deployment of LTE in such bands implies sharing spectrum with mature technologies such as Wi-Fi. Several studies have discussed this coexistence problem by suggesting that LTE implements different adaptation mechanisms that allow transmission possibilities to Wi-Fi. While such adaptation mechanisms exist, they still negatively impact Wi-Fi performance, mainly due to the lack of collaboration/coordination mechanisms that inform about the co-located networks' activities. In this paper, we propose a distributed spectrum management framework that enhances the performance of Wi-Fi, as a particular case, by detecting harmful co-located wireless networks and changes the Wi-Fi's operating central frequency to avoid them. The framework is based on a Convolutional Neural Network (CNN) that can identify different wireless technologies and provides spectrum usage statistics. Experiments were carried out in a real-life testbed, and the results show that Wi-Fi maintains its performance when using our framework. This translates in an increase of at least 40% on the overall throughput compared to a non-managed operation of Wi-Fi.

Low power wide area networks support the success of long range Internet of things applications such as agriculture, security, smart cities and homes. This enormous popularity, however, breeds new challenging problems as the wireless spectrum gets saturated which increases the probability of collisions and performance degradation. To this end, smart spectrum decisions are needed and will be supported by wireless technology recognition to allow the networks to dynamically adapt to the ever changing environment where fair co-existence with other wireless technologies becomes essential. In contrast to existing research that assesses technology recognition using machine learning on powerful graphics processing units, this work aims to propose a deep learning solution using convolutional neural networks, cheap software defined radios and efficient embedded platforms such as NVIDIA's Jetson Nano. More specifically, this paper presents low complexity near-real time multi-band sub-GHz technology recognition and supports a wide variety of technologies using multiple settings. Results show accuracies around 99%, which are comparable with state of the art solutions, while the classification time on a NVIDIA Jetson Nano remains small and offers real-time execution. These results will enable smart spectrum management without the need of expensive and high power consuming hardware.

This paper presents a Convolutional Neural Network (CNN) approach for classification of low power wide area network (LPWAN) technologies such as Sigfox, LoRA and IEEE 802.15.4g. Since the technologies operate in unlicensed sub-GHz bands, their transmissions can interfere with each other and significantly degrade their performance. This situation further intensifies when the network density increases which will be the case of future LPWANs. In this regard, it becomes essential to classify coexisting technologies so that the impact of interference can be minimized by making optimal spectrum decisions. State-of-the-art technology classification approaches use signal processing approaches for solving the task. However, such techniques are not scalable and require domain-expertise knowledge for developing new rules for each new technology. On the contrary, we present a CNN approach for classification which requires limited domain-expertise knowledge, and it can be scalable to any number of wireless technologies. We present and compare two CNN based classifiers named CNN based on in-phase and quadrature (IQ) and CNN based on Fast Fourier Transform (FFT). The results illustrate that CNN based on IQ achieves classification accuracy close to 97% similar to CNN based on FFT and thus, avoiding the need for performing FFT.

Experimental wireless network research is often very time consuming and requires knowledge of multiple experimentation platforms (JFED, OMF, etc.), thereby hindering innovation specially from non-testbed experts. To foster innovation, this paper presents an intuitive wireless experimentation using the Node-RED framework. Within the framework, drag and drop components are combined to set-up wireless experiments in simulation and testbed environments, configure network stack and execute series of experiments. Furthermore, the intuitiveness of the Node-RED framework is demonstrated by using drag and drop components to optimize multiple conflicting objectives in simulation and in a real-testbed, without requiring advanced testbed knowledge.

It is our pleasure to write the Editorial for the Special Issue on Evolution and Development of 5G Wireless Communication Systems. Upon conclusion of fourth generation (4G) cellular network standardization tasks a few years ago, the direction of research has started to shift systematically towards fifth generation (5G) communication systems. The difference between 4G and 5G is not limited to the increased throughput and performance. 5G systems are supposed to be flexible to accommodate heterogeneous traffic and devices, and various applications with different quality-of-service (QoS) requirements. Particularly, the goal is to take full benefit of advances in technology including cloud computing, Internet of Things (IoT), ultra-dense networks, massive MIMO, device-to-device communication, pervasive and social computing. In order to meet stringent goals, 5G communication systems build upon the evolution of the existing technologies and the development of the new technologies mentioned above. The Special Issue contains 11 papers, each paper covers the subject from different prospective, and thus, offer readers a holistic view of different research challenges currently under investigation by research communities. The papers can be grouped under following topics: C. Hua et al. present a paper entitled “Wireless backhaul resource allocation and user-centric clustering in ultra-dense wireless networks”. It considers optimization of resource allocation in wireless backhaul links and user-centric clustering in the access links. The objective is to maximise the weighted sum rate of all users under the backhaul resource constraints. An iterative algorithm is proposed to solve the transformed problem based on its special property. Simulation results show that the proposed algorithm outperforms other existing schemes under different network settings. Z. Wang et al. present a paper entitled “Interference pricing in 5G ultra-dense small cell networks: a Stackelberg game approach” which models the scenario as a Stackelberg game, where the macrocell base stations (MBS) act as the leader and all small cell base stations (SCBSs) as followers. Simulation results show the correctness of the analysis and the significant benefits when the power control and channel allocation are jointly considered in the proposed schemes. Z. Kaleem et al. present “Public safety users’ priority-based energy and time-efficient device discovery scheme with contention resolution for ProSe in third generation partnership project long-term evolution-advanced systems”, which proposes a time and energy-efficient contention-resolving device discovery resource allocation (TEECR-DDRA) scheme that has the capability to enhance the success ratio for discovery of D2D users by reducing collisions among users. Moreover, the proposed TEECR-DDRA scheme has the ability to prioritise PS users to meet their QoS and latency requirements. System-level simulations show that the proposed TEECR-DDRA scheme performs remarkably well under D2D network. M. T. Gul et al. present a paper entitled “Merge-and-forward: a cooperative multimedia transmissions protocol using RaptorQ codes”, proposing a cooperative multimedia transmission protocol based on a novel merge-and-forward relaying and the best relay selection (RS) schemes. Moreover, to combat the packet loss for enhanced and reliable video delivery, they adopt application layer forward error correction scheme which is based on the most improved and advanced version of fountain codes (i.e., RaptorQ codes). They evaluate the performance of the proposed scheme in terms of decoding failure probability, decoding overhead, peak signal-to-noise ratio, and mean opinion score. K. Yang et al.'s paper “Edge aware cross-tier base station cooperation in heterogeneous wireless networks with non-uniformly-distributed nodes” investigates the cross-tier base station (BS) cooperation in non-uniform heterogeneous networks where the distribution of pico BSs (PBSs) is modelled as Neyman–Scott cluster process. The authors propose an edge aware cross-tier cooperation scheme to improve the performance of edge hotspot users that have weaker signal-to-interference-plus noise ratio (SINR). Stochastic geometry is utilised to derive the SINR and energy efficiency performance of the proposed scheme, which is compared with other classical schemes such as full cooperation (FC) and traditional non-cooperation scheme. Y. Cai et al. present “Secure transmission in the random cognitive radio networks with secrecy guard zone and artificial noise” which proposes a simple and decentralised secure transmission scheme by jointly incorporating the secrecy guard zone and artificial noise in cognitive radio networks. Numerical results show how the system parameters affect the achievable maximum secrecy throughput, the optimal transmission power and the optimal power allocation between the information-bearing signal and the artificial noise. Y. Sun et al. present “Local altruistic coalition formation game for spectrum sharing and interference management in hyper-dense cloud-RANs” and investigate the spectrum sharing and interference management in hyper-dense cloud radio access networks (C-RANs). The authors formulate this problem as a local altruistic coalition formation game (LACF) with externalities. The authors propose a distributed coalitional formation algorithm based on modified recursive core to obtain the final stable coalition partition. Furthermore, the system stability, convergence and complexity of the proposed algorithm are analysed. W. Chang et al. paper “Effects of non-uniform quantisation on the interference mitigation using multi-cell multiple-input and multiple-output coordinated beamforming” proposes a low complexity cumulative distribution function (CDF)-based non-uniform quantisation method with a limited number of feedback bits for applying more quantisation levels to represent feedback CSI, which occurs with higher probability. The simulation results proved the higher transmission rate, particularly in cases with fewer feedback bits. D. Liu et al.'s paper “Self-organising multiuser matching in cellular networks: a score-based mutually beneficial approach” studies the self-organising user assignment problem for the multi-user cooperation network. Furthermore, the multi-user assignment problem is formulated as a one-to-one matching game, in which idle users and active users rank one another individually based on their own preference. Simulation results show that the proposed distributed algorithm yields well matching performance between source users and relay users, which is close to the optimal centralised results. D. C. Araújo et al.'s paper “Massive MIMO: survey and future research topics” presents an overview of the basic concepts of massive multiple-input multiple-output, with a focus on the challenges and opportunities, based on contemporary research. R. Sun et al. present the paper “Transceiver design for cooperative nonorthogonal multiple access systems with wireless energy transfer”. The paper considers an energy harvesting-based cooperative non-orthogonal multiple access (NOMA) system. Transmitter beamforming, power splitter and receiver filter are jointly designed to maximise rate with the predefined QoS constraint of weaker node and the power constraint of node which simultaneously sends independent signals to a stronger node and weaker node. Since the problem is non-convex, they propose an iterative approach to solve it. Moreover, a zero-forcing based low-complexity solution is also presented. Simulation results demonstrate that, both two proposed schemes have better performance than the direction transmission. All of the papers in Special Issue show that 5G systems can support the specialized use cases which are not supported by the current access systems. In addition, authors investigated the issues related to backhaul for 5G systems and latency reduction. The integration of new technologies with the evolved current systems bring tremendous improvement in 5G systems. Alagan Anpalagan received the B.A.Sc., M.A.Sc., and Ph.D. degrees in electrical engineering from the University of Toronto, Toronto, ON, Canada. In 2001, he joined the Department of Electrical and Computer Engineering, Ryerson University, Toronto, where he was promoted to Full Professor in 2010. He served the department as the Graduate Program Director (2004–2009) and the Interim Electrical Engineering Program Director (2009–2010). He directs a research group working on radio resource management and radio access and networking areas within the WINCORE Lab. During his sabbatical (2010–2011), he was a Visiting Professor with Asian Institute of Technology and a Visiting Researcher with Kyoto University, Kyoto, Japan. His industrial experience includes working at Bell Mobility, Nortel Networks, and IBM Canada. He has coauthored three edited books, namely, Design and Deployment of Small Cell Networks (Cambridge University Press, 2014), Routing in Opportunistic Networks (Springer, 2013), and Handbook on Green Information and Communication Systems (Academic Press, 2012). His current research interests include cognitive radio resource allocation and management, wireless cross-layer design and optimization, cooperative communication, machine-to-machine communication, small cell networks, and green communications technologies. Dr. Anpalagan has served as an Associate Editor of the IEEE Communications Surveys & Tutorials since 2012 and Springer Wireless Personal Communications since 2009. Adnan Shahid received the B.Eng. and the M.Eng. degrees in computer engineering with communication specialization from the University of Engineering and Technology, Taxila, Pakistan in 2006 and 2010, respectively, and the Ph.D degree in information and communication engineering from the Sejong University, South Korea in 2015. He is currently working as a Postdoctoral Researcher at iMinds/IBCN, Department of Information Technology, University of Ghent, Belgium. From Sep 2015 – Jun 2016, he was with the Department of Computer Engineering, Taif University, Saudi Arabia. From Mar 2015 – Aug 2015, he worked as a Postdoc Researcher at Yonsei University, South Korea. From Aug 2012 – Feb 2015, he worked as a PhD research assistant in Sejong University, South Korea. From Mar 2007 – Aug 2012, he served as a Lecturer in electrical engineering department of National University of Computer and Emerging Sciences (NUCES-FAST), Pakistan. He was also the recipient of the prestigious BK 21 plus Postdoc program at Yonsei University, South Korea. He is a member of IEEE and actively involved in various research activities. He is also serving as an Associate Editor at IEEE Access Journal and Annals of Telecommunication Journal. His research interests includes the next generation wireless communication and networks with prime focus on resource management, interference management, cross-layer optimization, self-organizing networks, small cell networks, device to device communications, machine to machine communications, 5G wireless communications, etc. Waleed Ejaz (S’12, M’14, SM‱16) is a Senior Research Associate at the Department of Electrical and Computer Engineering, Ryerson University, Toronto, Canada. Prior to this, he was a Post-doctoral fellow at Queen's University, Kingston, Canada. He received his Ph.D. degree in Information and Communication Engineering from Sejong University, Republic of Korea in 2014. He earned his M.Sc. and B.Sc. degrees in Computer Engineering from National University of Sciences & Technology, Islamabad, Pakistan and University of Engineering & Technology, Taxila, Pakistan, respectively. He worked in top engineering universities in Pakistan and Saudi Arabia as a Faculty Member.His current research interests include Internet of Things (IoT), energy harvesting, 5G cellular networks, and mobile cloud computing. He is currently serving as an Associate Editor of the Canadian Journal of Electrical and Computer Engineering and the IEEE ACCESS. In addition, he is handling the special issues in IET Communications, the IEEE ACCESS, and the Journal of Internet Technology. He also completed certificate courses on Teaching and Learning in Higher Education from the Chang School at Ryerson University. Muhammad Ali Imran received his M.Sc. (Distinction) and Ph.D. degrees from Imperial College London, UK, in 2002 and 2007, respectively. He is currently a Reader in the Centre for Communication Systems Research (CCSR) at the University of Surrey, UK. He has a global collaborative research network spanning both academia and key industrial players in the field of wireless communications. He has lead role in a number of multimillion international research projects including the new physical layer work area for 5G innovation centre at Surrey. He has supervised 17 successful PhD graduates and published over 150 peer-reviewed research papers including more than 20 IEEE Journals. His research interests include the derivation of information theoretic performance limits, energy efficient design of cellular system and learning/self-organizing techniques for optimization of cellular system operation. He is a senior member of IEEE and a Fellow of Higher Education Academy (FHEA), UK. Kandeepan Sithamparanathan has a PhD from the University of Technology, Sydney and is currently with the School of Electrical and Computer Engineering at RMIT University. He is also a NICTA Researcher at the NICTA Victoria Research Laboratory (VRL, Melbourne). In the past he had worked with the National ICT Australia (Canberra Research Laboratory) and CREATE-NET (Trento). Kandeepan served as one of the Vice Chairs for the IEEE Technical Committee on Cognitive Networks (TCCN) and has published a book together with Dr Andrea Giorgetti from the University of Bologna, Italy, titled ‘Cognitive Radio Techniques: Spectrum Sensing, Interference Mitigation and Localization’, published by Artech House (Boston). He currently Chairs the IEEE VIC Communication Society Chapter and is a Senior Member of the IEEE. He was awarded as one of the best IEEE Reviewers by the IEEE Communications Society. Kandeepan has published around ninety peer reviewed journal and conference papers. He has chaired several IEEE workshops and other conferences. His research interests are in 5G communications, cognitive radios and signal processing techniques. Yuhua Xu received his B.S. degree in Communications Engineering, and Ph.D. degree in Communications and Information Systems from College of Communications Engineering, PLA University of Science and Technology, in 2006 and 2014 respectively. He has been with College of Communications Engineering, PLA University of Science and Technology since 2012, and currently as an Assistant Professor. His research interests focus on opportunistic spectrum access, learning theory, game theory, and distributed optimization techniques for wireless communications. He has published several papers in international conferences and reputed journals in his research area. He served as Associate Editor for Wiley Transactions on Emerging Telecommunications Technologies and KSII Transactions on Internet and Information Systems. In 2011 and 2012, he was awarded Certificate of Appreciation as Exemplary Reviewer for the IEEE Communications Letters. He was selected to receive the IEEE Signal Processing Society's (SPS) 2015 Young Author Best Paper Award, and the Funds for Distinguished Young Scholars of Jiangsu Province in 2015.