Reliable object localization is a critical challenge in drone-based aerial manipulation, particularly when objects are outside the camera's field of view. This paper presents a new approach to enhance drone reliability in aerial grasping tasks by integrating a 1D time-of-flight range sensor with a vision-based localization system. The range sensor, positioned beneath the drone, generates a detailed point cloud of the ground beneath the drone, allowing for precise object localization even when the drone hovers directly above the target. By combining visual tracking with realtime distance measurements, our system achieves a 96 % grasp success rate across 128 trials with diverse objects, representing a significant improvement over previous approaches. This method enables zero-shot grasping without prior knowledge of the objects, increasing versatility and robustness in complex, unstructured environments. The open-source software and hardware design of the platform provide a foundation for further research and development in the field of autonomous aerial manipulation.

Artificial muscles play a crucial role in musculoskeletal robotics and prosthetics to approximate the force-generating functionality of biological muscle. However, current artificial muscle systems are typically limited to either contraction or extension, not both. This limitation hinders the development of fully functional artificial musculoskeletal systems. We address this challenge by introducing an artificial antagonistic muscle system capable of both contraction and extension. Our design integrates non-stretchable electrohydraulic soft actuators (HASELs) with electrostatic clutches within an antagonistic musculoskeletal framework. This configuration enables an antagonistic joint to achieve a full range of motion without displacement loss due to tendon slack. We implement a synchronization method to coordinate muscle and clutch units, ensuring smooth motion profiles and speeds. This approach facilitates seamless transitions between antagonistic muscles at operational frequencies of up to 3.2 Hz. While our prototype utilizes electrohydraulic actuators, this muscle-clutch concept is adaptable to other non-stretchable artificial muscles, such as McKibben actuators, expanding their capability for extension and full range of motion in antagonistic setups. Our design represents a significant advancement in the development of fundamental components for more functional and efficient artificial musculoskeletal systems, bringing their capabilities closer to those of their biological counterparts.

General-purpose robots should possess humanlike dexterity and agility to perform tasks with the same versatility as us. A human-like form factor further enables the use of vast datasets of human-hand interactions. However, the primary bottleneck in dexterous manipulation lies not only in software but arguably even more in hardware. Robotic hands that approach human capabilities are often prohibitively expensive, bulky, or require enterprise-level maintenance, limiting their accessibility for broader research and practical applications. What if the research community could get started with reliable dexterous hands within a day? We present the open-source ORCA hand, a reliable and anthropomorphic 17-DoF tendon-driven robotic hand with integrated tactile sensors, fully assembled in less than eight hours and built for a material cost below 2,000 CHF. We showcase ORCA’s key design features such as popping joints, auto-calibration, and tensioning systems that significantly reduce complexity while increasing reliability, accuracy, and robustness. We benchmark the ORCA hand across a variety of tasks, ranging from teleoperation and imitation learning to zero-shot sim-to-real reinforcement learning. Furthermore, we demonstrate its durability, withstanding more than 10,000 continuous operation cycles—equivalent to approximately 20 hours—without hardware failure, the only constraint being the duration of the experiment itself. Video is here: youtu.be/kUbPSYMmOds. Design files, source code, and documentation are available at srl.ethz.ch/orcahand.

This paper presents the SABD hand, a 16-degree-of-freedom (DoF) robotic hand that departs from purely anthropomorphic designs to achieve an expanded grasp envelope, enable manipulation poses beyond human capability, and reduce the required number of actuators. This is achieved by combining the adduction/abduction (Add/Abd) joint of digits four and five into a single joint with a large range of motion. The combined joint increases the workspace of the digits by 400% and reduces the required DoFs while retaining dexterity. Experimental results demonstrate that the combined Add/Abd joint enables the hand to grasp objects with a side distance of up to 200 mm. Reinforcement learning-based investigations show that the design enables grasping policies that are effective not only for handling larger objects but also for achieving enhanced grasp stability. In teleoperated trials, the hand successfully performed 86% of attempted grasps on suitable YCB objects, including challenging non-anthropomorphic configurations. These findings validate the design’s ability to enhance grasp stability, flexibility, and dexterous manipulation without added complexity, making it well-suited for a wide range of applications.

Biomimetic and compliant robotic hands offer the potential for human-like dexterity, but controlling them is challenging due to high dimensionality, complex contact inter-actions, and uncertainties in state estimation. Sampling-based model predictive control (MPC), using a physics simulator as the dynamics model, is a promising approach for generating contact-rich behavior. However, sampling-based MPC has yet to be evaluated on physical (non-simulated) robotic hands, particularly on compliant hands with state uncertainties. We present the first successful demonstration of in-hand manipulation on a physical biomimetic tendon-driven robot hand using sampling-based MPC. While sampling-based MPC does not require lengthy training cycles like reinforcement learning approaches, it still necessitates adapting the task-specific objective function to ensure robust behavior execution on physical hardware. To adapt the objective function, we integrate a visual language model (VLM) with a real-time optimizer (MuJoCo MPC). We provide the VLM with a high-level human language description of the task and a video of the hand’s current behavior. The VLM gradually adapts the objective function, allowing for efficient behavior generation, with each iteration taking less than two minutes. We show the feasibility of ball rolling, flipping, and catching using both simulated and physical robot hands. Our results demonstrate that sampling-based MPC is a promising approach for generating dexterous manipulation skills on biomimetic hands without extensive training cycles.1

Existing modeling and control methods for real-world systems typically deal with uncertainty and nonlinearity on a case-by-case basis. We present a universal and robust control framework for the general class of uncertain nonlinear systems. Our data-driven deep stochastic Koopman operator (DeSKO) model and robust learning control framework guarantee robust stability. DeSKO learns the uncertainty of dynamical systems by inferring a distribution of observables. The inferred distribution is used in our robust and stabilizing closed-loop controller for dynamical systems. We also develop a model predictive control framework with integral action to compensate for run-time parametric uncertainty, such as manipulating unknown objects. Modeling and control experiments in simulation show that our presented framework is more robust and scalable for robotic systems than state-of-the-art controllers using deep Koopman operators and reinforcement learning (RL) methods. We demonstrate that our method resists previously unseen uncertainties, such as external disturbances, at a magnitude of up to five times the maximum control input. Furthermore, we test our DeSKO-based control framework on a real-world soft robotic arm. It shows that our framework outperforms model-based controllers that have full knowledge of the model parameters, and the controller can conduct object pick-and-place tasks without further training. Our approach opens up new possibilities in robustly managing internal or external uncertainty while controlling high-dimensional nonlinear systems in a learning framework. This approach serves as a foundation to greatly simplify high-level control and decision-making for robots.

The computational efficiency of many neural operators, widely used for learning solutions of PDEs, relies on the fast Fourier transform (FFT) for performing spectral computations. As the FFT is limited to equispaced (rectangular) grids, this limits the efficiency of such neural operators when applied to problems where the input and output functions need to be processed on general non-equispaced point distributions. Leveraging the observation that a limited set of Fourier (Spectral) modes suffice to provide the required expressivity of a neural operator, we propose a simple method, based on the efficient direct evaluation of the underlying spectral transformation, to extend neural operators to arbitrary domains. An efficient implementation of such direct spectral evaluations is coupled with existing neural operator models to allow the processing of data on arbitrary non-equispaced distributions of points. With extensive empirical evaluation, we demonstrate that the proposed method allows us to extend neural operators to arbitrary point distributions with significant gains in training speed over baselines, while retaining or improving the accuracy of Fourier neural operators (FNOs) and related neural operators.

The human shoulder, with its glenohumeral joint, tendons, ligaments, and muscles, allows for the execution of complex tasks with precision and efficiency. However, current robotic shoulder designs lack the compliance and compactness inherent in their biological counterparts. A major limitation of these designs is their reliance on external sensors like rotary encoders, which restrict mechanical joint design and introduce bulk to the system. To address this constraint, we present a bio-inspired antagonistic robotic shoulder with two degrees of freedom powered by self-sensing hydraulically amplified self-healing electrostatic actuators. Our artificial muscle design decouples the high-voltage electrostatic actuation from the pair of low-voltage self-sensing electrodes. This approach allows for proprioceptive feedback control of trajectories in the task space while eliminating the necessity for any additional sensors. We assess the platform’s efficacy by comparing it to a feedback control based on position data provided by a motion capture system. The study demonstrates closed-loop controllable robotic manipulators based on an inherent self-sensing capability of electrohydraulic actuators. The proposed architecture can serve as a basis for complex musculoskeletal joint arrangements.

Conventional industrial robots often use two-fingered grippers or suction cups to manipulate objects or interact with the world. Because of their simplified design, they are unable to reproduce the dexterity of human hands when manipulating a wide range of objects. While the control of humanoid hands evolved greatly, hardware platforms still lack capabilities, particularly in tactile sensing and providing soft contact surfaces. In this work, we present a method that equips the skeleton of a tendon-driven humanoid hand with a soft and sensorized tactile skin. Multi-material 3D printing allows us to iteratively approach a cast skin design which preserves the robot’s dexterity in terms of range of motion and speed. We demonstrate that a soft skin enables firmer grasps and piezoresistive sensor integration enhances the hand’s tactile sensing capabilities.

The development of robotic grippers and hands for automation aims to emulate human dexterity without sacrificing the efficiency of industrial grippers. This study introduces Rotograb, a tendon-actuated robotic hand featuring a novel rotating thumb. The aim is to combine the dexterity of human hands with the efficiency of industrial grippers. The rotating thumb enlarges the workspace and allows in-hand manipulation. A novel joint design minimizes movement interference and simplifies kinematics, using a cutout for tendon routing. We integrate teleoperation, using a depth camera for real-time tracking and autonomous manipulation powered by reinforcement learning with proximal policy optimization. Experimental evaluations demonstrate that Rotograb’s rotating thumb greatly improves both operational versatility and workspace. It can handle various grasping and manipulation tasks with objects from the YCB dataset, with particularly good results when rotating objects within its grasp. Rotograb represents a notable step towards bridging the capability gap between human hands and industrial grippers. The tendon-routing and thumb-rotating mechanisms allow for a new level of control and dexterity. Integrating teleoperation and autonomous learning underscores Rotograb’s adaptability and sophistication, promising substantial advancements in both robotics research and practical applications.

The need for compliant and proprioceptive actuators has grown more evident in pursuing more adaptable and versatile robotic systems. Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuators offer distinctive advantages with their inherent softness and flexibility, making them promising candidates for various robotic tasks, including delicate interactions with humans and animals, biomimetic locomotion, prosthetics, and exoskeletons. This has resulted in a growing interest in the capacitive self-sensing capabilities of HASEL actuators to create miniature displacement estimation circuitry that does not require external sensors. However, achieving HASEL self-sensing for actuation frequencies above 1 Hz and with miniature high-voltage power supplies has remained limited. In this paper, we introduce the F-HASEL actuator, which adds an additional electrode pair used exclusively for capacitive sensing to a Peano-HASEL actuator. We demonstrate displacement estimation of the F-HASEL during high-frequency actuation up to 20 Hz and during external loading using miniaturized circuitry comprised of low-cost off-the-shelf components and a miniature high-voltage power supply. Finally, we propose circuitry to estimate the displacement of multiple F-HASELs and demonstrate it in a wearable application to track joint rotations of a virtual reality user in real-time.

Rapid human-robot interactions require fast hardware platforms with minimal latency and high reliability. In response, we present a cost-effective, electrically actuated, tendon-driven robotic hand. This hand features a unique spool-free actuation mechanism that achieves a limit-to-limit flexion movement in less than 60 ms, matching human speed. To our knowledge, it is among the fastest electric motor tendon-driven robotic hands available today. The high speed of the robotic hand was successfully demonstrated in public by playing Rock Paper Scissors at a science fair. This research work outlines the design methodology and introduces a simulation-optimization framework that allows users to preview the motion of the hand, quantify the actuation performance, and customize the design parameters prior to fabrication. The proposed actuation mechanism, along with the simulation and optimization tools, illustrates design principles and computational methods applicable to other dynamic human-robot applications that require fast reaction times. The Dextra hand design is available at https://sensorsini.github.io/dextra-robot-hand.

We present Aquarium, a differentiable fluid-structure interaction solver for robotics that offers stable simulation, accurately coupled fluid-robot physics in two dimensions, and full differentiability with respect to fluid and robot states and parameters. Aquarium achieves stable simulation with accurate flow physics by directly integrating over the incompressible Navier-Stokes equations using a fully implicit Crank-Nicolson scheme with a second-order finite-volume spa-tial discretization. The fluid and robot physics are coupled using the immersed-boundary method by formulating the no-slip condition as an equality constraint applied directly to the Navier-Stokes system. This choice of coupling allows the fluid-structure interaction to be posed and solved as a nonlinear optimization problem. This optimization-based formulation is then exploited using the implicit-function theorem to compute derivatives. Derivatives can then be passed to downstream gradient-based optimization or learning algorithms. We demon-strate Aquarium's ability to accurately simulate coupled fluid-robot physics with numerous 2D examples, including a cylinder in free stream and a soft robotic fish tail with hardware validation. We also demonstrate Aquarium's ability to provide analytical gradients by performing gradient-based shape-and-gait optimization of an oscillating diamond foil to maximize its generated thrust.

In a future with autonomous robots, visual and spatial perception is of utmost importance for robotic systems. Particularly for aerial robotics, there are many applications where utilizing visual perception is necessary for any real-world scenarios. Robotic aerial grasping using drones promises fast pick-and-place solutions with a large increase in mobility over other robotic solutions. Utilizing Mask R-CNN scene segmentation (detectron2), we propose a vision-based system for autonomous rapid aerial grasping which does not rely on mark-ers for object localization and does not require the appearance of the object to be previously known. Combining segmented images with spatial information from a depth camera, we generate a dense point cloud of the detected objects and perform geometry - based grasp planning to determine grasping points on the objects. In real-world experiments on a dynamically grasping aerial platform, we show that our system can replicate the performance of a motion capture system for object local-ization up to 94.5 % of the baseline grasping success rate. With our results, we show the first use of geometry-based grasping techniques with a flying platform and aim to increase the autonomy of existing aerial manipulation platforms, bringing them further towards real-world applications in warehouses and similar environments.††Code: https://github.com/srl-ethz/detectron-realsense

Aquatic locomotion is a classic fluid-structure interaction (FSI) problem of interest to biologists and engineers. Solving the fully coupled FSI equations for incompressible Navier-Stokes and finite elasticity is computationally expensive. Optimizing robotic swimmer design within such a system generally involves cumbersome, gradient-free procedures on top of the already costly simulation. To address this challenge we present a novel, fully differentiable hybrid approach to FSI that combines a 2D direct numerical simulation for the deformable solid structure of the swimmer and a physics-constrained neural network surrogate to capture hydrodynamic effects of the fluid. For the deformable solid simulation of the swimmer’s body, we use state-of-the-art techniques from the field of computer graphics to speed up the finite-element method (FEM). For the fluid simulation, we use a U-Net architecture trained with a physics-based loss function to predict the flow field at each time step. The pressure and velocity field outputs from the neural network are sampled around the boundary of our swimmer using an immersed boundary method (IBM) to compute its swimming motion accurately and efficiently. We demonstrate the computational efficiency and differentiability of our hybrid simulator on a 2D carangiform swimmer. Due to differentiability, the simulator can be used for computational design of controls for soft bodies immersed in fluids via direct gradient-based optimization.

Soft robots are made of compliant materials and perform tasks that are challenging for rigid robots. However, their continuum nature makes it difficult to develop model-based control strategies. This work presents a robust model-based control scheme for soft continuum robots. Our dynamic model is based on the Euler-Lagrange approach, but it uses a more accurate description of the robot's inertia and does not include oversimplified assumptions. Based on this model, we introduce an adaptive sliding mode control scheme, which is robust against model parameter uncertainties and unknown input disturbances. We perform a series of experiments with a physical soft continuum arm to evaluate the effectiveness of our controller at tracking task-space trajectory under different payloads. The tracking performance of the controller is around 38 % more accurate than that of a state-of-the-art controller, i.e., the inverse dynamics method. Moreover, the proposed model-based control design is flexible and can be generalized to any continuum robotic arm with an arbitrary number of segments. With this control strategy, soft robotic object manipulation can become more accurate while remaining robust to disturbances.

We present SMORS, the first Soft fully actuated MultirOtoR System for multimodal locomotion. Unlike conventional hexarotors, SMORS is equipped with three rigid and three continuously soft arms, with each arm hosting a propeller. We create a bridge between the fields of soft and aerial robotics by mechanically coupling the actuation of a fully actuated flying platform with the actuation of a soft robotic manipulator. Each rotor is slightly tilted, allowing for full actuation of the platform. The soft components combined with the platform's full actuation allow for a robust interaction, in the form of efficient multimodal locomotion. In this work, we present the dynamical model of the platform, derive a closed-loop control, and present simulation results fortifying the robustness of the platform under a jumping-flying maneuver. We demonstrate in simulations that our multimodal locomotion approach can be more energy-efficient than the flight with a hexarotor.

Rapid aerial grasping through robots can lead to many applications that utilize fast and dynamic picking and placing of objects. Rigid grippers traditionally used in aerial manipulators require high precision and specific object geometries for successful grasping. We propose RAPTOR, a quadcopter platform combined with a custom Fin Ray®gripper to enable more flexible grasping of objects with different geometries, leveraging the properties of soft materials to increase the contact surface between the gripper and the objects. To reduce the communication latency, we present a new lightweight middleware solution based on Fast DDS (Data Distribution Service) as an alternative to ROS (Robot Operating System). We show that RAPTOR achieves an average of 83% grasping efficacy in a real-world setting for four different object geometries while moving at an average velocity of 1 m/s during grasping. In a high-velocity setting, RAPTOR supports up to four times the payload compared to previous works. Our results highlight the potential of aerial drones in automated warehouses and other manipulation applications where speed, swiftness, and robustness are essential while operating in hard-to-reach places.11Code: https://github.com/raptor-ethz/raptor_setup

To aid in real-world situations, soft robots need to be able to estimate their state and external interactions based on proprioceptive sensors. Estimating disturbances allows a soft robot to perform desirable force control. However, even in the case of rigid manipulators, force estimation at the end-effector is seen as a non-trivial problem. And indeed, current approaches to address this challenge have shortcomings that prevent their general application. They are often based on simplified soft dynamic models, such as the ones relying on a piece-wise constant curvature approximation or matched rigid-body models that do not represent enough details of the problem. This severely limits applications in complex human-robot interaction. Finite element method (FEM) based modeling allows for predictions of soft robot dynamics in a more generic fashion. Here, using the soft robot modeling capabilities of the frame-work SOFA, we built a detailed FEM model of a multi-segment soft continuum robotic arm composed of compliant deformable materials and fiber-reinforced pressurized actuation chambers. In addition, a model for sensors that provide orientation output is presented. This model is used to establish a state observer for the manipulator. The sensor model is adequate for representing the output of flexible bend sensors as well as orientations provided by IMUs or coming from tracking systems, all of which are popular choices in soft robotics. Model parameters were calibrated to match imperfections of the manual fabrication process using physical experiments. We then solve a quadratic programming inverse statics problem to compute the components of external force that explain the pose mismatch. Our experiments show an average force estimation error of around 1.2%. As the methods proposed are generic, these results are encouraging for the task of building soft robots exhibiting complex, reactive, sensor-based behavior that can be deployed in human-centered environments.

Soft robotics has the potential to revolutionize robotic locomotion, in particular, soft robotic swimmers offer a minimally invasive and adaptive solution to explore and preserve our oceans. Unfortunately, current soft robotic swimmers are vastly inferior to evolved biological swimmers, especially in terms of controllability, efficiency, maneuverability, and longevity. Additionally, the tedious iterative fabrication and empirical testing required to design soft robots has hindered their optimization. In this work, we tackle this challenge by providing an efficient and straightforward pipeline for designing and fabricating soft robotic swimmers equipped with electrostatic actuation. We streamline the process to allow for rapid additive manufacturing, and show how a differentiable simulation can be used to match a simplified model to the real deformation of a robotic swimmer. We perform several experiments with the fabricated swimmer by varying the voltage and actuation frequency of the swimmer's antagonistic muscles. We show how the voltage and frequency vary the locomotion speed of the swimmer while moving in liquid oil and observe a clear optimum in forward swimming speed. The differentiable simulation model we propose has various downstream applications, such as control and shape optimization of the swimmer; optimization results can be directly mapped back to the real robot through our sim-to-real matching.

Fluidically actuated soft robots have promising capabilities such as inherent compliance and user safety. The control of soft robots needs to properly handle nonlinear actuation dynamics, motion constraints, workspace limitations, and variable shape stiffness, so having a unique algorithm for all these issues would be extremely beneficial. In this work, we adapt Model Predictive Control (MPC), popular for rigid robots, to a soft robotic arm called SoPrA. We address the challenges that current control methods are facing, by proposing a frame-work that handles these in a modular manner. While previous work focused on Joint-Space formulations, we show through simulation and experimental results that Task-Space MPC can be successfully implemented for dynamic soft robotic control. We provide a way to couple the Piece-wise Constant Curvature and Augmented Rigid Body Model assumptions with internal and external constraints and actuation dynamics, delivering an algorithm that unites these aspects and optimizes over them. We believe that a MPC implementation based on our approach could be the way to address most of model-based soft robotics control issues within a unified and modular framework, while allowing to include improvements that usually belong to other control domains such as machine learning techniques.

Soft robots are promising for manipulation tasks thanks to their compliance, safety, and high degree of freedom. However, the commonly used bidirectional continuum segment design means soft robotic manipulators only function in a limited hemispherical workspace. This work increases a soft robotic arm's workspace by designing, fabricating, and controlling an additional soft prismatic actuator at the base of the soft arm. This actuator consists of pneumatic artificial muscles and a piston, making the actuator back-driveable. We increase the task space volume by 116%, and we are now able to perform manipulation tasks that were previously impossible for soft robots, such as picking and placing objects at different positions on a surface and grabbing an object out of a container. By combining a soft robotic arm with a prismatic joint, we greatly increase the usability of soft robots for object manipulation. This work promotes the use of integrated and modular soft robotic systems for practical manipulation applications in human-centered environments.

Accurate simulation of soft mechanisms under dynamic actuation is critical for the design of soft robots. We address this gap with our differentiable simulation tool by learning the material parameters of our soft robotic fish. On the example of a soft robotic fish, we demonstrate an experimentally-verified, fast optimization pipeline for learning the material parameters from quasi-static data via differentiable simulation and apply it to the prediction of dynamic performance. Our method identifies physically plausible Young's moduli for various soft silicone elastomers and stiff acetal copolymers used in creation of our three different robotic fish tail designs. We show that our method is compatible with varying internal geometry of the actuators, such as the number of hollow cavities. Our framework allows high fidelity prediction of dynamic behavior for composite bi-morph bending structures in real hardware to millimeter-accuracy and within 3% error normalized to actuator length. We provide a differentiable and robust estimate of the thrust force using a neural network thrust predictor; this estimate allows for accurate modeling of our experimental setup measuring bollard pull. This work presents a prototypical hardware and simulation problem solved using our differentiable framework; the framework can be applied to higher dimensional parameter inference, learning control policies, and computational design due to its differentiable character.

Due to their inherent compliance, soft robots are more versatile than rigid linked robots when they interact with their environment, such as object manipulation or biomimetic motion, and are considered to be the key element in introducing robots to everyday environments. Although various soft robotic actuators exist, past research has focused primarily on designing and analyzing single components. Limited effort has been made to combine each component to create an overall capable, integrated soft robot. Ideally, the behavior of such a robot can be accurately modeled, and its motion within an environment uses its proprioception, without requiring external sensors. This work presents a design and modeling process for a Soft continuum Proprioceptive Arm (SoPrA) actuated by pneumatics. The integrated design is suitable for an analytical model due to its internal capacitive flex sensor for proprioceptive measurements and its fiber-reinforced fluidic elastomer actuators. The proposed analytical dynamical model accounts for the inertial effects of the actuator’s mass and the material properties, and predicts in real-time the soft robot’s behavior. Our estimation method integrates the analytical model with proprioceptive sensors to calculate external forces, all without relying on an external motion capture system. SoPrA is validated in a series of experiments demonstrating the model’s and sensor’s accuracy in estimation. SoPrA will enable soft arm manipulation including force sensing while operating in obstructed environments that disallows exteroceptive measurements.

The computational design of soft underwater swimmers is challenging because of the high degrees of freedom in soft-body modeling. In this paper, we present a differentiable pipeline for co-designing a soft swimmer's geometry and controller. Our pipeline unlocks gradient-based algorithms for discovering novel swimmer designs more efficiently than traditional gradient-free solutions. We propose Wasserstein barycenters as a basis for the geometric design of soft underwater swimmers since it is differentiable and can naturally interpolate between bio-inspired base shapes via optimal transport. By combining this design space with differentiable simulation and control, we can efficiently optimize a soft underwater swimmer's performance with fewer simulations than baseline methods. We demonstrate the efficacy of our method on various design problems such as fast, stable, and energy-efficient swimming and demonstrate applicability to multi-objective design.

This work introduces a wearable system to provide situational awareness for blind and visually impaired people. The system includes a camera, an embedded computer and a haptic device to provide feedback when an obstacle is detected. The system uses techniques from computer vision and motion planning to (1) identify walkable space; (2) plan step-by-step a safe motion trajectory in the space, and (3) recognize and locate certain types of objects, for example the location of an empty chair. These descriptions are communicated to the person wearing the device through vibrations. We present results from user studies with low- and high-level tasks, including walking through a maze without collisions, locating a chair, and walking through a crowded environment while avoiding people.

This paper introduces a novel technique for fabricating functional robots using 3D printers. Simultaneously depositing photopolymers and a non-curing liquid allows complex, pre-filled fluidic channels to be fabricated. This new printing capability enables complex hydraulically actuated robots and robotic components to be automatically built, with no assembly required. The technique is showcased by printing linear bellows actuators, gear pumps, soft grippers and a hexapod robot, using a commercially-available 3D printer. We detail the steps required to modify the printer and describe the design constraints imposed by this new fabrication approach.

Undulating structures are one of the most diverse and successful forms of locomotion in nature, both on ground and in water. This paper presents a comparative study for actuation by undulation in water. We focus on actuating a 1DOF systems with several mechanisms. A hydraulic pump attached to a soft body allows for water movement between two inner cavities, ultimately leading to a flexing actuation in a side-to-side manner. The effectiveness of six different, self-contained designs based on centrifugal pump, flexible impeller pump, external gear pump and rotating valves are compared. These hydraulic actuation systems combined with soft test bodies were then measured at a lower and higher oscillation frequency. The deflection characteristics of the soft body, the acoustic noise of the pump and the overall efficiency of the system are recorded. A brushless, centrifugal pump combined with a novel rotating valve performed at both test frequencies as the most efficient pump, producing sufficiently large cyclic body deflections along with the least acoustic noise among all pumps tested. An external gear pump design produced the largest body deflection, but consumes an order of magnitude more power and produced high noise levels. Further refinement remains on determining the suitable oscillation frequencies and inner cavity designs for optimal efficiency and movement.

This work presents a soft hand capable of robustly grasping and identifying objects based on internal state measurements. A highly compliant hand allows for intrinsic robustness to grasping uncertainty, but the specific configuration of the hand and object is not known, leaving undetermined if a grasp was successful in picking up the right object. A soft finger was adapted and combined to form a three finger gripper that can easily be attached to existing robots, for example, to the wrist of the Baxter robot. Resistive bend sensors were added within each finger to provide a configuration estimate sufficient for distinguishing between a set of objects. With one data point from each finger, the object grasped by the gripper can be identified. A clustering algorithm to find the correspondence for each grasped object is presented for both enveloping grasps and pinch grasps. This hand is a first step towards robust proprioceptive soft grasping.

Soft-bodied robots are designed to work in the physical world with a high compliance, while most of them lack in highly dynamic motion. In this paper, we present a soft-bodied jumping robot, which leverages its body's elasticity to achieve a highly dynamic passive bouncing motion after an active jumping motion. This robot has a cubic shape. It is covered by silicone foam, and each of its six faces has an opening to allow for jumping actuation. By winding up and releasing an elastic strip, the robot can jump in two directions at any orientation. We present the design, and fabrication process, and experimental results. By comparing this robot with a rigid version of the robot, we show that this soft-bodied robot can use a single jump to travel longer forward than its rigid counterpart.

Soft continuum manipulators have the advantage of being more compliant and having more degrees of freedom than rigid redundant manipulators. This attribute should allow soft manipulators to autonomously execute highly dexterous tasks. However, current approaches to motion planning, inverse kinematics, and even design limit the capacity of soft manipulators to take full advantage of their inherent compliance. We provide a computational approach to whole arm planning for a soft planar manipulator that advances the arm's end effector pose in task space while simultaneously considering the arm's entire envelope in proximity to a confined environment. The algorithm solves a series of constrained optimization problems to determine locally optimal inverse kinematics. Due to inherent limitations in modeling the kinematics of a highly compliant soft robot and the local optimality of the planner's solutions, we also rely on the increased softness of our newly designed manipulator to accomplish the whole arm task, namely the arm's ability to harmlessly collide with the environment. We detail the design and fabrication of the new modular manipulator as well as the planner's central algorithm. We experimentally validate our approach by showing that the robotic system is capable of autonomously advancing the soft arm through a pipe-like environment in order to reach distinct goal states.

Generating robot motion trajectories instantaneously in the moment unforeseen sensor events happen is very essential for many real-world robot applications. Using a previous work on online trajectory generation as a basis, this paper proposes an alternative approach that also considers dynamic models. The former class of algorithms does not take into account dynamically changing acceleration capabilities based on maximum actuator forces/torques. This paper extends target velocity-based algorithms of the previous approach by taking into consideration the entire system dynamics when generating trajectories online within one control cycle (typically 1 ms or less). The extension includes the acceleration capabilities of a robot at every discrete time step assuming constant values for the maximum actuator forces/torques, thus allowing the generation of adaptive trajectory profiles during the motion of the robot. Several real-world experimental results using a seven-degree-of-freedom lightweight robot arm underline the relevance of this extension.