We address the important problem of generalizing robotic rearrangement to clutter without any explicit object models. We first generate over 650K cluttered scenes-orders of magnitude more than prior work-in diverse everyday environments, such as cabinets and shelves. We render synthetic partial point clouds from this data and use it to train our CabiNet model architecture. CabiNet is a collision model that accepts object and scene point clouds, captured from a single-view depth observation, and predicts collisions for SE(3) object poses in the scene. Our representation has a fast inference speed of 7μs/query with nearly 20% higher performance than baseline approaches in challenging environments. We use this collision model in conjunction with a Model Predictive Path Integral (MPPI) planner to generate collision-free trajectories for picking and placing in clutter. CabiNet also predicts waypoints, computed from the scene's signed distance field (SDF), that allows the robot to navigate tight spaces during rearrangement. This improves rearrangement performance by nearly 35% compared to baselines. We systematically evaluate our approach, procedurally generate simulated experiments, and demonstrate that our approach directly transfers to the real world, despite training exclusively in simulation. Supplementary material and videos of robot experiments in completely unknown scenes are available at: cabinet-object-rearrangement.github.io.

We introduce a new simulation benchmark “Han-doverSim” for human-to-robot object handovers. To simulate the giver's motion, we leverage a recent motion capture dataset of hand grasping of objects. We create training and evaluation environments for the receiver with standardized protocols and metrics. We analyze the performance of a set of baselines and show a correlation with a real-world evaluation.11Code is open sourced at https://handover-sim.github.io.

Grasping in cluttered environments is a fundamental but challenging robotic skill. It requires both reasoning about unseen object parts and potential collisions with the manipulator. Most existing data-driven approaches avoid this problem by limiting themselves to top-down planar grasps which is insufficient for many real-world scenarios and greatly limits possible grasps. We present a method that plans 6-DOF grasps for any desired object in a cluttered scene from partial point cloud observations. Our method achieves a grasp success of 80.3%, outperforming baseline approaches by 17.6% and clearing 9 cluttered table scenes (which contain 23 unknown objects and 51 picks in total) on a real robotic platform. By using our learned collision checking module, we can even reason about effective grasp sequences to retrieve objects that are not immediately accessible. Supplementary video can be found here.

Recent self-supervised learning approaches focus on using a few thousand data points to learn policies for high-level, low-dimensional action spaces. However, scaling this framework for higher-dimensional control requires either scaling up the data collection efforts or using a clever sampling strategy for training. We present a novel approach - Curriculum Accelerated Self-Supervised Learning (CASSL) - to train policies that map visual information to high-level, higher-dimensional action spaces. CASSL orders the sampling of training data based on control dimensions: the learning and sampling are focused on few control parameters before other parameters. The right curriculum for learning is suggested by variance-based global sensitivity analysis of the control space. We apply our CASSL framework to learning how to grasp using an adaptive, underactuated multi-fingered gripper, a challenging system to control. Our experimental results indicate that CASSL provides significant improvement and generalization compared to baseline methods such as staged curriculum learning (8% increase) and complete end-to-end learning with random exploration (14% improvement) tested on a set of novel objects.

Deep reinforcement learning could be used to learn dexterous robotic policies but it is challenging to transfer them to new robots with vastly different hardware properties. It is also prohibitively expensive to learn a new policy from scratch for each robot hardware due to the high sample complexity of modern state-of-the-art algorithms. We propose a novel approach called Hardware Conditioned Policies where we train a universal policy conditioned on a vector representation of robot hardware. We considered robots in simulation with varied dynamics, kinematic structure, kinematic lengths and degrees-of-freedom. First, we use the kinematic structure directly as the hardware encoding and show great zero-shot transfer to completely novel robots not seen during training. For robots with lower zero-shot success rate, we also demonstrate that fine-tuning the policy network is significantly more sample-efficient than training a model from scratch. In tasks where knowing the agent dynamics is important for success, we learn an embedding for robot hardware and show that policies conditioned on the encoding of hardware tend to generalize and transfer well. Videos of experiments are available at: https://sites.google.com/view/robot-transfer-hcp.

Data-driven approaches to solving robotic tasks have gained a lot of traction in recent years. However, most existing policies are trained on large-scale datasets collected in curated lab settings. If we aim to deploy these models in unstructured visual environments like people's homes, they will be unable to cope with the mismatch in data distribution. In such light, we present the first systematic effort in collecting a large dataset for robotic grasping in homes. First, to scale and parallelize data collection, we built a low cost mobile manipulator assembled for under 3K USD. Second, data collected using low cost robots suffer from noisy labels due to imperfect execution and calibration errors. To handle this, we develop a framework which factors out the noise as a latent variable. Our model is trained on 28K grasps collected in several houses under an array of different environmental conditions. We evaluate our models by physically executing grasps on a collection of novel objects in multiple unseen homes. The models trained with our home dataset showed a marked improvement of 43.7% over a baseline model trained with data collected in lab. Our architecture which explicitly models the latent noise in the dataset also performed 10% better than one that did not factor out the noise. We hope this effort inspires the robotics community to look outside the lab and embrace learning based approaches to handle inaccurate cheap robots.

The growth of robot-assisted minimally invasive surgery has led to sizable datasets of fixed-camera video and kinematic recordings of surgical subtasks. Segmentation of these trajectories into locally-similar contiguous sections can facilitate learning from demonstrations, skill assessment, and salvaging good segments from otherwise inconsistent demonstrations. Manual, or supervised, segmentation can be prone to error and impractical for large datasets. We present Transition State Clustering with Deep Learning (TSC-DL), a new unsupervised algorithm that leverages video and kinematic data for task-level segmentation, and finds regions of the visual feature space that correlate with transition events using features constructed from layers of pre-trained image classification Deep Convolutional Neural Networks (CNNs). We report results on three datasets comparing Deep Learning architectures (AlexNet and VGG), choice of convolutional layer, dimensionality reduction techniques, visual encoding, and the use of Scale Invariant Feature Transforms (SIFT). We find that the deep architectures extract features that result in up-to a 30.4% improvement in Silhouette Score (a measure of cluster tightness) over the traditional “shallow” features from SIFT. We also present cases where TSC-DL discovers human annotator omissions. Supplementary material, data and code is available at: http://berkeleyautomation.github.io/tsc-dl/.

Automating repetitive surgical subtasks such as suturing, cutting and debridement can reduce surgeon fatigue and procedure times and facilitate supervised tele-surgery. Programming is difficult because human tissue is deformable and highly specular. Using the da Vinci Research Kit (DVRK) robotic surgical assistant, we explore a “Learning By Observation” (LBO) approach where we identify, segment, and parameterize motion sequences and sensor conditions to build a finite state machine (FSM) for each subtask. The robot then executes the FSM repeatedly to tune parameters and if necessary update the FSM structure. We evaluate the approach on two surgical subtasks: debridement of 3D Viscoelastic Tissue Phantoms (3d-DVTP), in which small target fragments are removed from a 3D viscoelastic tissue phantom; and Pattern Cutting of 2D Orthotropic Tissue Phantoms (2d-PCOTP), a step in the standard Fundamentals of Laparoscopic Surgery training suite, in which a specified circular area must be cut from a sheet of orthotropic tissue phantom. We describe the approach and physical experiments with repeatability of 96% for 50 trials of the 3d-DVTP subtask and 70% for 20 trials of the 2d-PCOTP subtask. A video is available at: http://j.mp/Robot-Surgery-Video-Oct-2014.

In robot-assisted surgery, manipulation tasks can be achieved through collaboration among robotic and human agents. Collaboration models can potentially include multiple agents working towards a shared objective - a scenario referred to as multilateral manipulation. In this work, we examine multilateral manipulation in the task of debridement: removing dead tissue or damaged tissue fragments to allow remaining healthy tissue to heal. We extended our previously developed multilateral manipulation software framework to the task of debridement and implemented four different collaboration models: (1) fully autonomous debridement, (2) shared control between a human and robotic agent, (3) supervised control where the operator identifies foreign bodies to be excised, and (4) teleoperation. We demonstrate these collaboration models with the RAVEN-II robot, an open-architecture surgical robot with two cable-driven 7-DOF arms. Each collaboration model included methods to remove foreign bodies from the field of view of a stereoscopic camera setup. Results indicate tradeoffs in experiment duration, hardware requirements, and safety implications among the four collaboration models.

Automation of repetitive tasks can improve laparoscopic surgical procedures by unloading surgeons and reducing duration, trauma, and expense. However, surgical procedures involve delicate manipulation of deformable tissues in a very dynamic environment, suggesting that automated execution of surgical tasks should be carried out under the supervision of the surgeon. We propose a teleoperated architecture that allows a surgeon to employ and supervise agents that can autonomously perform or assist with surgical tasks. The architecture is independent of the automation method. It includes a dominance factor that allows the surgeon to take control over the slave robot at any time, and an aggressiveness factor that sets the performance pace of the autonomous agent. We tested the architecture during execution of a multilateral tension-and-cut task, where a human operator and an autonomous agent are responsible for tensioning or cutting of a tissue. The architecture allowed for supervised and paced automation of the task. We found that collaboration of the human operator and autonomous agent can lead to shorter completion time compared to performance of only a human.