Forest fires in Canada’s boreal forest can cause a great deal of concern for populations, environment and infrastructures. One of the tools developed to predict potential fire activity related to these events is the Canadian Fire Weather Index System (FWICAN). This study aims to analyse the potential of Soil Moisture and Ocean Salinity (SMOS) satellite products (Soil Moisture (SM), Vegetation Optical Depth (VOD) and Root Zone Soil Moisture (RZSM)) to provide additional information on pre-fire soil and vegetion conditions for forest fire danger rating system. Using Random Forest algorithm, we show that adding SMOS data to the FWICANsystem indices slightly increases the accuracy of the predictions of potential fire activity. The RZSM from SMOS data was the variable that best improved the model performance, whereas the VOD provided no additional information. In the aim to evaluate the method for regions with limited in situ meteorological data, we used FWI system indices calculated from ERA5 available over the globe (FWIERA5). Taking into account FWIERA5, SMOS data allow to improve substantially the ability to predict forest fire.

This letter analyzes the contribution of the Sentinel-1 (S1) satellites, which provide C-band synthetic aperture radar (SAR) data, to the monitoring of forest dieback. Multispectral satellites (typically Landsat 8 or Sentinel-2, S2) have been found to be effective in detecting early signs of dieback, while little work has been done with SAR data despite its sensitivity to canopy structure and water content and its ability to pass through clouds. Our analysis is conducted on two study sites in France, where the dieback of chestnut and oak plots have been labeled. Classifications have been conducted to measure the ability of S1 data to identify plot in dieback. Our results show that S1 time series are not very sensitive to forest dieback. Using a single S2 image leads to more powerful classification results than using 1 year of S1 data. While S1 data may not be suitable for stand-alone forest dieback detection, it could be interesting to use it for other forest monitoring applications that should not be affected by dieback (species identification and clear-cut detection).

The last decade has witnessed a series of extreme droughts across the globe. The impacts of these droughts have been devastating for the ecosystem and human activities. In this paper we present the assessment of the drought events in the last decade from the remote sensing-based root zone soil moisture anomalies. The root zone soil moisture is obtained from the SMOS surface soil moisture. And the drought index is defined as the monthly anomaly of the root zone soil moisture. Our results show the distribution of droughts over the last decade in various regions across the globe.

Inland water storage is a key reservoir in the continental water cycle but the scientific knowledge about its spatio-temporal dynamic is still poor, especially over tropical areas. By coupling the Soil and Water Assessment Tool (SWAT) model and the Soil WAter Fraction (SWAF) data to increase the inundation delineation precision, inland water storage in the Madeira Basin located in Southern Amazon Basin was computed from 1998 to 2018 each day. During this period, the maximum of water storage was reached in March every year and varied from$3.01\times 10^{11}\ \mathrm{m}^{3}$to$1.22\times 10^{11}\ \mathrm{m}^{3}$. The Madeira Basin and each floodplain section have a peculiar temporal hydrologic response. The methodology presented in this paper can be extended to the entire Amazon Basin and other large-scale watersheds.

Wetlands and open waters are key components of the hydrological and carbon cycles but their spatio-temporal dynamics are still not well known at global scale. Current paper presents a new methodology to retrieve water fraction at coarse scale and high temporal resolution (one week) using L-Band multi-angular and dual polarisation remote sensing data from SMOS mission. The dataset labeled G-SWAF (or Global-SWAF) is an extention of the SWAF approach which did not consider the separate contributions of the Soil, Vegetation and water fractions. The comparison to existing datasets shows more water fraction detecting in Tropical areas but better consideration of high latitudes is still needed to be included in future studies. The use of such datasets with the future data from the SWOT (NASA/CNES) mission will provide global evaluation of inland open water volumes at 10 days scale.

Wetlands and open waters are key components of the hydrological and carbon cycles but their spatio-temporal dynamics are still not well known, mostly over tropical areas. In this paper, a new water surface product at high spatial resolution (30 arcsec) and high temporal resolution (3 days) over the Amazon basin for recent years (2010-2016) is presented. This product comes from the synergy between recent products: (1) water surface fraction at coarse spatial resolution from L-band microwave sensor (Soil Moisture and Ocean Salinity - SMOS), (2) Global Surface Water Occurrence (GSWO) from Landsat sensor and (3) the new Digital Elevation Model (DEM) Multi-Error-Removed-Improved-Terrain (MERIT) based on the Shuttle Radar Topography Mission (SRTM) observations.

The Radar Vegetation Index (RVI) is widely applied to indicate vegetation cover. The index includes the backscattering intensities of co- and cross-polarization that do not only contain information coming from vegetation scattering at longer wavelength (L-band), but also from the soil underneath. A forward modelling approach using active and passive microwave-derived parameters to obtain the scattering contribution of the soil is pursued. The idea of this research study is a subtraction of the attenuated soil scattering contribution from the measured backscattering intensities, to provide a clean vegetation-based solution, called improved RVI (RVII). For latter analysis, the vegetation volume is forward modeled to calculate vegetation-only RVI-values without any soil scattering contribution. It reveals that, the pre-factor of the standard RVI leads to values up to 1.2, unfavorable for a normalized index running between zero and one. Hence, improvements for the standard RVI equation are proposed here to obtain a better suited value range and for incorporating soil scattering influences and filtering of regions with dominant soil scattering. Moreover, the improved RVI (RVII) is compared with datasets of vegetation and soil parameters (e.g. vegetation water content) for correlation analysis to find the physical parameters contributing to the index.

This study presents a new SMOS (Soil Moisture and Ocean Salinity) soil moisture (SM) product based on a different scattering albedo and soil roughness parameterization: the SMOS-IC (SMOS INRA-CESBIO) data set. In this study, several parameterizations of the vegetation and soil roughness parameters (ω, HRand NRP, P = H, V) were tested and the retrieved SM was compared against in situ observations obtained from the International Soil Moisture Network (ISMN). Firstly, values of ω = 0.10, HR= 0.4 and NRP= −1 (P = H, V) were found globally. Secondly, a calibration of these parameters was obtained for the different land cover categories of the International Geosphere-Biosphere Programme (IGBP) scheme. Depending on the IGBP land cover class, values of ω and HRvaried, respectively, in the ranges 0.08–0.12 and 0.1–0.5. The IGBP-based calibration is currently used in the SMOS-IC product algorithm. Using as reference the ISMN sites, a better performance of the SMOS-IC product over the operational SMOSL3 (SMOS level 3) SM product was found: R = 0.62, bias = −0.019 m3/m3, ubRMSE = 0.061 m3/m3 for SMOS-IC; against R = 0.54, bias = −0.037 m3/m3 and ubRMSE = 0.069 m3/m3 for SMOSL3.

The Soil Moisture and Ocean Salinity mission has been collecting data for over 7 years. The whole data set has been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS) an used to see trends and finalise potential applications. This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surfaces (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. After 7 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events. Also we now have access the Soil Moisture Active and Passive (SMAP) mission and there are obvious synergisms to infer.

This letter aims to estimate the effective scattering albedo ($\omega _{p}$) over the tropical forests using L-band (1.4 GHz) microwave remote sensing. It is carried out using Soil Moisture and Ocean Salinity (SMOS) mission data over five years (2011–2015). We find similar values of$\omega _{p}$computed over the Congo and Amazon forests. The$\omega _{p }$values depend slightly on the polarization. The values of$\omega _{p }$at H-polarization and at 52° ± 5° (40° ± 5°) of incidence angle are within the range 0.064 – 0.069 ± 0.01 (0.061 – 0.067 ± 0.012). At V-polarization, the values of$\omega _{p }$are slightly lower (0.060 – 0.061 ± 0.013 at 52° ± 5° of incidence angle and 0.052 – 0.055 ± 0.013 at 40° ± 5° of incidence angle). These findings should contribute to a better calibration of the value of$\omega _{p }$over the tropical forests in both the SMOS and SM active and passive retrieval algorithms, leading to increase the SM retrieval accuracy over heterogeneous pixels.

This study focuses on the calibration of the effective scattering albedo (ω) of vegetation in the soil moisture (SM) retrieval at L-Band. Currently, in the SMOS Level 2 and 3 algorithms, the value of ω is set to 0 for low vegetation and ∼ 0.06 – 0.08 for forests. Different parameterizations of vegetation (in terms of ω values) were tested in this study. The possibility of combining soil roughness and vegetation contributions as a single parameter (“combined” method) leads to an important simplification in the algorithm and was also evaluated here. Following these assumptions, retrieved values of SMOS SM were compared with SM data measured over many in situ sites worldwide from the International Soil Moisture Network. These validation sites were classified using the International Geosphere-Biosphere Programme (IGBP) classification scheme. In situ SM measurements and SM retrievals were compared, and statistical scores were computed. The optimum albedo configuration was then found for each class of the IGBP landcover classification. Preliminary results yield values of albedo between 0.07 to 0.12 under the assumption of homogeneous pixels.

The Soil Moisture and Ocean Salinity mission has been collecting data for 6 years. The whole data set has just been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS). This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surfaces (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. After 6 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events.

Soil Moisture and Ocean Salinity (SMOS) satellite has been providing surface soil moisture (SSM) and ocean salinity (OS) retrievals at L-band for five years (2010-2014). During these five years, the SSM retrieval algorithm i.e. the L-MEB (L-Band Microwave Emission of the Biosphere [1] model has been progressively improved and hence results in different versions of the SMOS SSM products. This study aims at evaluating the last improvement in the SSM products of the most recent SMOS level 3 (SMOSL3) reprocessing (SMOSL3_2.72) vs. an earlier version (SMOSL3_246). Correlation, bias, Root Mean Square Difference (RMSD) and unbiased RMSD (unbRMSD) were used as performance criteria in this study using the ECMWF SM-DAS-2 product as a reference. Results show that the SMOS SSM estimates have been improved: (i) SMOSL3_272 was closer to SM-DAS-2 over most of the globe-with the exception of arid regions-in terms of unbRMSD (ii) SMOSL3_272 was closer to SM-DAS-2 over Spain, Brazil, parts of Sahel, high latitude and equator regions but comparable with SMOSL3_246 over most of the rest of the globe in terms of correlations.

This paper focuses on a new approach to account for soil roughness effects in the retrieval of soil moisture (SM) at L-band in the framework of the SMOS (Soil Moisture and Ocean Salinity) mission: the Simplified Roughness Parameterization (SRP). While the classical retrieval approach considers SM and τNAD(vegetation optical depth) as retrieved parameters, this approach is based on the retrieval of SM and the TR parameter combining τNADand soil roughness (TR = τNAD+ HR/2). Different roughness parameterizations were tested to find the best correlation (R), bias and unbiased RMSE (ubRMSE) when comparing homogeneous retrievals of SM and in situ SM measurements carried out at the VAS (Valencia Anchor Station) vineyard field. The highest R (0.68) and lowest ubRMSE (0.056 m3m−3) were found using the SRP method. Using the SMOS observations comparisons against several SM networks were also made: AACES, SCAN, watersheds and SMOSMANIA. SM was retrieved over all these stations. The SRP and another similar approach (SRP2) improved the averaged ubRMSE, while the SRP2 method leaded to higher correlation values (R). A global underestimation of SM was noticed, which may be linked to the differences in the sampling depths of the L-band observations (∼ 0–3cm for both Elbara-II and SMOS) and of the in situ measurements (∼ 0–5 cm).

Performances of two global satellite-based surface soil moisture (SSM) retrievals with respect to model-based SSM derived from the MERRA (Modern-Era Retrospective analysis for Research and Applications) rea-nalysis were explored in this paper: (i) Soil Moisture and Ocean Salinity (SMOS; passive) Level-3 SSM (SMOSL3) and (ii) the Advanced Scatterometer (ASCAT; active) SSM. Temporal correlation was used to investigate the performance of SMOSL3 and ASCAT SSM products during the period 05/2010–2012 on a global basis. Both SMOSL3 and ASCAT (slightly better) captured well (R>0.70) the long-term variability of the modelled SSM, particularly, over the Indian subcontinent, the Great Plains of North America, and the Sahel. However, ASCAT had negative correlations in arid regions, in particular across the Sahara and the Arabian Peninsula. This may be due to complex scattering mechanisms over very dry surfaces. To explore the land cover dependence of the analyzed statistical indicators, the global correlation results were averaged per biome extracted from a global map of biomes. In general, SMOSL3 and ASCAT performances behaved differently from one biome to another. For SMOSL3, the highest average correlation was observed over “tropical semi-arid” (R = ∼ 0.5) and “temperate semi-arid” biomes, whereas for ASCAT, the highest correlations were observed over “tropical semi-arid” (R = ∼ 0.7) and “tropical humid” biomes. The poorest agreement for both SMOSL3 and ASCAT was generally found over “tundra” and “desert temperate” biomes, particularly for ASCAT. This study showed that the performance of both SMOSL3 and ASCAT is highly dependent on vegetation. We also showed that both of them provide complementary information on SSM, which implies a potential for data fusion which would be pertinent for the ESA climate change initiative (CCI).

In this paper, roughness parameterizations providing best retrievals of soil moisture (SM) at L-band were evaluated. Different parameterizations were tested to find the best correlation R, bias and ubRMSE when comparing retrieved SM and in situ SM measurements carried out at the VAS (Valencia Anchor Station) over a vineyard field. Roughness measurements were always performed after the agricultural practices in the vineyard. These in situ data was used as input of the L-MEB (L-band Microwave Emission of the Biosphere) model, which permits the retrieval of SM and TAU (vegetation optical depth). In addition, a simplified method consisting on the retrieval of a parameter which combines the effects of roughness and TAU was tested. Significantly higher correlation (R=0.86) for SM was found using this method, while the absolute bias (-0.062) and RMSE (0.069) were slightly higher than for other roughness parameterizations.

The Soil Moisture and Ocean Salinity (SMOS) mission is the first satellite dedicated to providing global surface soil moisture (SM). SMOS operates at L-band and at this frequency, the signal depends on soil moisture but is also significantly affected by surface soil roughness. Using the Combined soil Roughness & Vegetation Effects (CRVE) method detailed in this paper, the effect of vegetation and soil roughness can be combined using a single parameter, referred to as TR here. SM and TR were retrieved by inverting the SMOS observations using the forward emission model (L-MEB). Assuming a linear relationship between TR and LAI obtained by the MODIS data, an Australian map of soil roughness was computed. This map could lead to improved soil moisture retrievals for present and future microwave remote sensing missions such as SMOS and the Soil Moisture Active Passive (SMAP) scheduled for launch in November 2014.

The usefulness of microwave remote sensing to retrieve near-surface soil moisture has already been demonstrated in many studies. However, obtaining high quality estimates of soil moisture is influenced by many effects from soil, vegetation and atmosphere; one of the key parameters is surface roughness. This research focusses on a semi-empirical method to evaluate the roughness effects from space borne observations. Global maps of roughness effects are evaluated at C-band from AMSR-E measurements.