Recent advances in propagation-based phase-contrast imaging, such as hierarchical imaging, have enabled the visualization of internal structures in large biological specimens and material samples. However, modulation-based techniques, which provide quantitative electron density information, face challenges when imaging larger objects due to stringent beam stability requirements and detector distortions. Extending the field of view of these methods is crucial for obtaining comparable quantitative results across beamlines and adapting to the smaller beam profiles of fourth-generation synchrotron sources.We introduce a novel image processing technique combining an eigenflat optimization with deformable image registration to address the challenges and enable quantitative high-resolution scans of centimeter-sized objects with multiple-micrometer resolution. We demonstrate the potential of the method by obtaining an electron density map of a rat brain sample 15mm in diameter despite the limited horizontal field of view of 6mm of the beamline. This showcases the technique's ability to significantly widen the range of applications of modulation-based techniques in both biological and materials science research.

X-ray dark-field imaging enables a spatially-resolved visualization of ultra-small-angle X-ray scattering. Using phantom measurements, we demonstrate that a material's effective dark-field signal may be reduced by modification of the visibility spectrum by other dark-field-active objects in the beam. This is the dark-field equivalent of conventional beam-hardening, and is distinct from related, known effects, where the dark-field signal is modified by attenuation or phase shifts. We present a theoretical model for this group of effects and verify it by comparison to the measurements. These findings have significant implications for the interpretation of dark-field signal strength in polychromatic measurements.

Grating-based X-ray phase-contrast and in particular dark-field radiography are promising new imaging modalities for medical applications. Currently, the potential advantage of dark-field imaging in early-stage diagnosis of pulmonary diseases in humans is being investigated. These studies make use of a comparatively large scanning interferometer at short acquisition times, which comes at the expense of a significantly reduced mechanical stability as compared to tabletop laboratory setups. Vibrations create random fluctuations of the grating alignment, causing artifacts in the resulting images. Here, we describe a novel maximum likelihood method for estimating this motion, thereby preventing these artifacts. It is tailored to scanning setups and does not require any sample-free areas. Unlike any previously described method, it accounts for motion in between as well as during exposures.

Dual-energy imaging is a clinically well-established technique that offers several advantages over conventional X-ray imaging. By performing measurements with two distinct X-ray spectra, differences in energy-dependent attenuation are exploited to obtain material-specific information. This information is used in various imaging applications to improve clinical diagnosis. In recent years, grating-based X-ray dark-field imaging has received increasing attention in the imaging community. The X-ray dark-field signal originates from ultra small-angle scattering within an object and thus provides information about the microstructure far below the spatial resolution of the imaging system. This property has led to a number of promising future imaging applications that are currently being investigated. However, different microstructures can hardly be distinguished with current X-ray dark-field imaging techniques, since the detected dark-field signal only represents the total amount of ultra small-angle scattering. To overcome these limitations, we present a novel concept called dual-energy X-ray dark-field material decomposition, which transfers the basic material decomposition approach from attenuation-based dual-energy imaging to the dark-field imaging modality. We develop a physical model and algorithms for dual-energy dark-field material decomposition and evaluate the proposed concept in experimental measurements. Our results suggest that by sampling the energy-dependent dark-field signal with two different X-ray spectra, a decomposition into two different microstructured materials is possible. Similar to dual-energy imaging, the additional microstructure-specific information could be useful for clinical diagnosis.

Diagnostic lung imaging is often associated with high radiation dose and lacks sensitivity, especially for diagnosing early stages of structural lung diseases. Therefore, diagnostic imaging methods are required which provide sound diagnosis of lung diseases with a high sensitivity as well as low patient dose. In small animal experiments, the sensitivity of grating-based X-ray dark-field imaging to structural changes in the lung tissue was demonstrated. The energy-dependence of the X-ray dark-field signal of lung tissue is a function of its microstructure and not yet known. Furthermore, conventional X-ray dark-field imaging is not capable of differentiating different types of pathological changes, such as fibrosis and emphysema. Here we demonstrate the potential diagnostic power of grating-based X-ray dark-field in combination with spectral imaging in human chest radiography for the direct differentiation of lung diseases. We investigated the energy-dependent linear diffusion coefficient of simulated lung tissue with different diseases in wave-propagation simulations and validated the results with analytical calculations. Additionally, we modeled spectral X-ray dark-field chest radiography scans to exploit these differences in energy-dependency. The results demonstrate the potential to directly differentiate structural changes in the human lung. Consequently, grating-based spectral X-ray dark-field imaging potentially contributes to the differential diagnosis of structural lung diseases at a clinically relevant dose level.

We investigate the combination of two emerging X-ray imaging technologies, namely spectral imaging and differential phase contrast imaging. By acquiring spatially and temporally registered images with several different X-ray spectra, spectral imaging can exploit differences in the energy-dependent attenuation to generate material selective images. Differential phase contrast imaging uses an entirely different contrast generation mechanism: The phase shift that an X-ray wave exhibits when traversing an object. As both methods can determine the (projected) electron density, we propose a novel material decomposition algorithm that uses the spectral and the phase contrast information simultaneously. Numerical experiments show that the combination of these two imaging techniques benefits from the strengths of the individual methods while the weaknesses are mitigated: Quantitatively accurate basis material images are obtained and the noise level is strongly reduced, compared to conventional spectral X-ray imaging.

By resolving the energy of the incident X-ray photons, spectral X-ray imaging with photon counting detectors offers additional material-specific information compared to conventional X-ray imaging. This additional information can be used to improve clinical diagnosis for various applications. However, spectral imaging still faces several challenges. Amplified noise and a reduced signal-to-noise ratio on the decomposed basis material images remain a major problem, especially for low-dose applications. Furthermore, it is challenging to construct an accurate model of the spectral measurement acquisition process. In this paper, we present a novel algorithm for projection-based material decomposition. It uses an empirical polynomial model that is tuned by calibration measurements. We combine this method with a statistical model of the measured photon counts and a dictionary-based joint regularization approach. We focused on spectral coronary angiography as a potential clinical application of projection-based material decomposition with photon counting detectors. Numerical and real experiments show that spectral angiography with realistic dose levels and gadolinium contrast agent concentrations are feasible using the proposed decomposition algorithm and currently available photon-counting detector technology.

Grating-based differential phase-contrast imaging has proven to be feasible with conventional X-ray sources. The polychromatic spectrum generally limits the performance of the interferometer but benefit can be gained with an energy-sensitive detector. In the presented work, we employ the energy-discrimination capability to correct for phase-wrapping artefacts. We propose to use the phase shifts, which are measured in distinct energy bins, to estimate the optimal phase shift in the sense of maximum likelihood. We demonstrate that our method is able to correct for phase-wrapping artefacts, to improve the contrast-to-noise ratio and to reduce beam hardening due to the modelled energy dependency. The method is evaluated on experimental data which are measured with a laboratory Talbot-Lau interferometer equipped with a conventional polychromatic X-ray source and an energy-sensitive photon-counting pixel detector. Our work shows, that spectral imaging is an important step to move differential phase-contrast imaging closer to pre-clinical and clinical applications, where phase wrapping is particularly problematic.