Physical unclonable functions (PUFs) involve challenging practical applications of error-correcting codes (ECCs), requiring extremely low failure rates on the order of $10^{-6}$ and below despite raw input bit error rates as high as 22%. These requirements call for an efficient ultra-low rate code design. In this work, we propose a novel coding scheme tailored for PUFs based on Polar codes and a low-complexity version of automorphism ensemble decoding (AED). Notably, our serial AED scheme reuses a single successive cancellation (SC) decoder across multiple decoding attempts. By introducing cascaded and recursive interleavers, we efficiently scale the number of AED candidates without requiring expensive large multiplexers. An aggressive quantization strategy of only 3 bits per message further reduces the area requirements of the underlying SC decoder. The resulting coding scheme achieves the same block error rate of $10^{-6}$ as our baseline based on Bose-Ray-Chaudhuri-Hocquenghem (BCH) codes while requiring 1.75x fewer codeword bits to encode the same K = 312 payload bits. This reduction translates directly into 1.75x less helper data storage and, consequently, a smaller overall chip area.

In this work, we propose a fully differentiable iterative decoder for quantum low-density parity-check (LDPC) codes. The proposed algorithm is composed of classical belief propagation (BP) decoding stages and intermediate graph neural network (GNN) layers. Both components of the decoder are defined over the same sparse decoding graph enabling a seamless integration and scalability to large codes. The core idea is to use the GNN component between consecutive BP runs so that the knowledge from the previous BP run can be leveraged to better initialize the next BP run. This enables the proposed decoder to learn to compensate for sub-optimal BP decoding graphs that result from the design constraints of quantum LDPC codes. Since the entire decoder remains differentiable, gradient descent-based training is possible. We compare the error rate performance of the proposed decoder against various post-processing methods such as random perturbation, enhanced feedback, augmentation, and ordered-statistics decoding (OSD) and show that a carefully designed training process lowers the error-floor significantly. As a result, our proposed decoder outperforms the former three methods using significantly fewer post-processing attempts. The source code of our experiments is available online.

We propose and practically demonstrate a joint detection and decoding scheme for short-packet wireless communications in scenarios that require to first detect the presence of a message before actually decoding it. For this, we extend the recently proposed serial Turbo-autoencoder neural network (NN) architecture and train it to find short messages that can be, all “at once”, detected, synchronized, equalized and decoded when sent over an unsynchronized channel with memory. The conceptional advantage of the proposed system stems from a holistic message structure with superimposed pilots for joint detection and decoding without the need of relying on a dedicated preamble. This results not only in a higher spectral efficiency, but also translates into the possibility of shorter messages compared to using a dedicated preamble. We compare the detection error rate (DER), bit error rate (BER) and block error rate (BLER) performance of the proposed system with a hand-crafted state-of-the-art conventional baseline and our simulations show a significant advantage of the proposed autoencoder-based system over the conventional baseline in every scenario up to messages conveying$k\!=\!96$information bits. Finally, we practically evaluate and confirm the improved performance of the proposed system over-the-air (OTA) using a software-defined radio (SDR)-based measurement testbed.

We propose a neural network (NN)-based algorithm for device detection and time of arrival (ToA) and carrier frequency offset (CFO) estimation for the narrowband physical random-access channel (NPRACH) of narrowband internet of things (NB-IoT). The introduced NN architecture leverages residual convolutional networks as well as knowledge of the preamble structure of the 5G New Radio (5G NR) specifications. Benchmarking on a 3rd Generation Partnership Project (3GPP) urban microcell (UMi) channel model with random drops of users against a state-of-the-art baseline shows that the proposed method enables up to 8 dB gains in false negative rate (FNR) as well as significant gains in false positive rate (FPR) and ToA and CFO estimation accuracy. Moreover, our simulations indicate that the proposed algorithm enables gains over a wide range of channel conditions, CFOs, and transmission probabilities. The introduced synchronization method operates at the base station (BS) and, therefore, introduces no additional complexity on the user devices. It could lead to an extension of battery lifetime by reducing the preamble length or the transmit power. Our code is available at: https://github.com/NVlabs/nprach_synch/.

The automorphism group of a code is the set of permutations of the codeword symbols that map the whole code onto itself. For polar codes, only a part of the automorphism group was known, namely the lower-triangular affine group (LTA), which is solely based upon the partial order of the code's synthetic channels. Depending on the design, however, polar codes can have a richer set of automorphisms. In this paper, we extend the LTA to a larger subgroup of the general affine group (GA), namely the block lower-triangular affine group (BLTA) and show that it is contained in the automorphism group of polar codes. Furthermore, we provide a low complexity algorithm for finding this group for a given information/frozen set and determining its size. Most importantly, we apply these findings in automorphism-based decoding of polar codes and report a comparable error-rate performance to that of successive cancellation list (SCL) decoding with significantly lower complexity.

We compare the potential of neural network (NN)-based channel estimation with classical linear minimum mean square error (LMMSE)-based estimators, also known as Wiener filtering. For this, we propose a low-complexity recurrent neural network (RNN)-based estimator that allows channel equalization of a sequence of channel observations based on independent time- and frequency-domain long short-term memory (LSTM) cells. Motivated by Vehicle-to-Everything (V2X) applications, we simulate time- and frequency-selective channels with orthogonal frequency division multiplex (OFDM) and extend our channel models in such a way that a continuous degradation from line-of-sight (LoS) to non-line-of-sight (NLoS) conditions can be emulated. It turns out that the NN-based system cannot just compete with the LMMSE equalizer, but it also can be trained w.r.t. resilience against system parameter mismatch. We thereby showcase the conceptual simplicity of such a data-driven system design, as this not only enables more robustness against, e.g., signal-to-noise-ratio (SNR) or Doppler spread estimation mismatches, but also allows to use the same equalizer over a wider range of input parameters without the need of re-building (or re-estimating) the filter coefficients. Particular attention has been paid to ensure compatibility with the existing IEEE 802.11p piloting scheme for V2X communications. Finally, feeding the payload data symbols as additional equalizer input unleashes further performance gains. We show significant gains over the conventional LMMSE equalization for highly dynamic channel conditions if such a data-augmented equalization scheme is used.

Reed–Muller (RM) codes are known for their good maximum likelihood (ML) performance in the short block-length regime. Despite being one of the oldest classes of channel codes, finding a low complexity soft-input decoding scheme is still an open problem. In this work, we present a versatile decoding architecture for RM codes based on their rich automorphism group. The decoding algorithm can be seen as a generalization of multiple-bases belief propagation (MBBP) and may use any polar or RM decoder as constituent decoders. We provide extensive error-rate performance simulations for successive cancellation (SC)-, SC-list (SCL)- and belief propagation (BP)-based constituent decoders. We furthermore compare our results to existing decoding schemes and report a near-ML performance for the RM(3,7)-code (e.g., 0.04 dB away from the ML bound at BLER of 10−3) at a competitive computational cost. Moreover, we provide some insights into the automorphism subgroups of RM codes and SC decoding and, thereby, prove the theoretical limitations of this method with respect to polar codes.

Although iterative decoding of polar codes has recently made huge progress based on the idea of permuted factor graphs, it still suffers from a non-negligible performance degradation when compared to state-of-the-art CRC-aided successive cancellation list (CA-SCL) decoding. In this work, we show that iterative decoding of polar codes based on the belief propagation list (BPL) algorithm can approach the error-rate performance of CA-SCL decoding and, thus, can be efficiently used for decoding the standardized 5G polar codes. Rather than only utilizing the cyclic redundancy check (CRC) as a stopping condition (i.e., for error-detection), we also aim to benefit from the error-correction capabilities of the outer CRC code. For this, we develop two distinct soft-decision CRC decoding algorithms: a Bahl-Cocke-Jelinek-Raviv (BCJR)-based approach and a sum product algorithm (SPA)-based approach. Further, an optimized selection of permuted factor graphs is analyzed and shown to reduce the decoding complexity significantly. Finally, we benchmark the proposed CRC-aided belief propagation list (CA-BPL) decoding to state-of-the-art 5G polar codes under CA-SCL decoding and, thereby, showcase an error-rate performance not just close to the CA-SCL but also close to the maximum likelihood (ML) bound as estimated by ordered statistic decoding (OSD).

We consider a trainable point-to-point communication system, where both transmitter and receiver are implemented as neural networks (NNs), and demonstrate that training on the bit-wise mutual information (BMI) allows seamless integration with practical bit-metric decoding (BMD) receivers, as well as joint optimization of constellation shaping and labeling. Moreover, we present a fully differentiable neural iterative demapping and decoding (IDD) structure which achieves significant gains on additive white Gaussian noise (AWGN) channels using a standard 802.11n low-density parity-check (LDPC) code. The strength of this approach is that it can be applied to arbitrary channels without any modifications. Going one step further, we show that careful code design can lead to further performance improvements. Lastly, we show the viability of the proposed system through implementation on software-defined radios (SDRs) and training of the end-to-end system on the actual wireless channel. Experimental results reveal that the proposed method enables significant gains compared to conventional techniques.

We showcase the practicability of an indoor positioning system (IPS) solely based on neural networks (NNs) and the channel state information (CSI) of a (Massive) multiple-input multiple-output (MIMO) communication system, i.e., only build on the basis of data that is already existent in today's systems. As such our IPS system promises both, a good accuracy without the need of any additional protocol/signaling overhead for the user localization task. In particular, we propose a tailored NN structure with an additional phase branch as feature extractor and (compared to previous results) a significantly reduced amount of trainable parameters, leading to a minimization of the amount of required training data. We provide actual measurements for indoor scenarios with up to 64 antennas covering a large area of 80m2. In the second part, several robustness investigations for real-measurements are conducted, i.e., once trained, we analyze the recall accuracy over a period of several days. Further, we analyze the impact of pedestrians walking in-between the measurements and show that finetuning and pre-training of the NN helps to mitigate effects of hardware drifts and alterations in the propagation environment over time. This reduces the amount of required training samples at equal precision and, thereby, decreases the effort of the costly training data acquisition.

We present a new framework for constructing polar codes (i.e., selecting the frozen bit positions) for arbitrary channels, tailored to a given decoding algorithm rather than assuming the (not necessarily optimal) successive cancellation (SC) decoding. The proposed framework is based on the genetic algorithm (GenAlg), where populations (i.e., collections) of information sets evolve via evolutionary transformations based on their individual error-rate performance. These populations converge toward an information set that fits both the decoding behavior and the defined channel. We construct polar codes, without the CRC-aid, tailored to plain successive cancellation list (SCL) decoding, achieving the same error-rate performance as the CRC-aided SCL decoding over both the AWGN channel and the Rayleigh channel, respectively. Furthermore, a proposed belief propagation (BP)-tailored construction approaches the SCL error-rate performance without any modifications in the decoding algorithm itself. The performance gains can be attributed to the significant reduction in the number of low-weight codewords. We show that, when required, the GenAlg can also be set up to find codes that reduce the decoding complexity. This way, the SCL list size or the number of BP iterations can be reduced while maintaining the same error-rate performance.

This paper considers the forward error correction (FEC) code design for approaching the capacity of adynamicmultiple access channel (MAC) where both the number of users and their respective signal powers keep constantly changing, resembling the scenario of an actual wireless cellular system. To obtain a low-complexity non-orthogonal multiple access (NOMA) scheme, we propose a serial concatenation of a low-density parity-check (LDPC) code and a repetition code (REP), this way achieving near Gaussian MAC (GMAC) capacity performance while coping with the dynamics of the MAC system. The joint optimization of the LDPC and REP codes is addressed by matching the analytical extrinsic information transfer (EXIT) functions of the sub-optimal multi-user detector (MUD) and the channel code for a specific and static MAC system, achieving near-GMAC capacity. We show that the near-capacity performance can be flexibly maintained with the same LDPC code regardless of the variations in the number of users and power levels. This flexibility (or elasticity) is provided by the REP code, acting as “user-load and power equalizer”, dramatically simplifying the practical implementation of NOMA schemes, as only a single LDPC code is needed to cope with the dynamics of the MAC system.

We introduce the Scattered Extrinsic Information Transfer (S-EXIT) chart as a tool for optimizing degree profiles of short length Low-Density Parity-Check (LDPC) codes under iterative decoding. As degree profile optimization is typically done in the asymptotic length regime, there is space for further improvement when considering the finite length behavior. We propose to consider the average extrinsic information as a random variable, exploiting its specific distribution properties for guiding code design. We explain, step-by-step, how to generate an S-EXIT chart for short-length LDPC codes. We show that this approach achieves gains in terms of bit error rate (BER) of 0.5 dB and 0.6 dB over the additive white Gaussian noise (AWGN) channel for codeword lengths of 128 and 180 bits, respectively, at a target BER of 10-4 when compared to conventional Extrinsic Information Transfer (EXIT) chart-based optimization. Also, a performance gain for the Binary Erasure Channel (BEC) for a block (i.e., codeword) length of 180 bits is shown.

We describe a novel approach to interpret a polar code as a low-density parity-check (LDPC)-like code with an underlying sparse decoding graph. This sparse graph is based on the encoding factor graph of polar codes and is suitable for conventional belief propagation (BP) decoding. We discuss several pruning techniques based on the check node decoder (CND) and variable node decoder (VND) update equations, significantly reducing the size (i.e., decoding complexity) of the parity-check matrix. As a result, iterative polar decoding can then be conducted on a sparse graph, akin to the traditional well-established LDPC decoding, e.g., using a fully parallel sum-product algorithm (SPA). This facilitates the systematic analysis and design of polar codes using the well-established tools known from analyzing LDPC codes. We show that the proposed iterative polar decoder has a negligible performance loss for short-to-intermediate codelengths compared to Arikan's original BP decoder. Finally, the proposed decoder is shown to benefit from both reduced complexity and reduced memory requirements and, thus, is more suitable for hardware implementations.

We show that the performance of iterative belief propagation (BP) decoding of polar codes can be enhanced by decoding over different carefully chosen factor graph realizations. With a genie-aided stopping condition, it can achieve the successive cancellation list (SCL) decoding performance which has already been shown to achieve the maximum likelihood (ML) bound provided that the list size is sufficiently large. The proposed decoder is based on different realizations of the polar code factor graph with randomly permuted stages during decoding. Additionally, a different way of visualizing the polar code factor graph is presented, facilitating the analysis of the underlying factor graph and the comparison of different graph permutations. In our proposed decoder, a high rate Cyclic Redundancy Check (CRC) code is concatenated with a polar code and used as an iteration stopping criterion (i.e., genie) to even outperform the SCL decoder of the plain polar code (without the CRC-aid). Although our permuted factor graph-based decoder does not outperform the SCL-CRC decoder, it achieves, to the best of our knowledge, the best performance of all iterative polar decoders presented thus far.

The training complexity of deep learning-based channel decoders scales exponentially with the codebook size and therefore with the number of information bits. Thus, neural network decoding (NND) is currently only feasible for very short block lengths. In this work, we show that the conventional iterative decoding algorithm for polar codes can be enhanced when sub-blocks of the decoder are replaced by neural network (NN) based components. Thus, we partition the encoding graph into smaller sub-blocks and train them individually, closely approaching maximum a posteriori (MAP) performance per sub-block. These blocks are then connected via the remaining conventional belief propagation decoding stage(s). The resulting decoding algorithm is non-iterative and inherently enables a highlevel of parallelization, while showing a competitive bit error rate (BER) performance. We examine the degradation through partitioning and compare the resulting decoder to state-of-the art polar decoders such as successive cancellation list and belief propagation decoding.

The decoding performance of polar codes strongly depends on the decoding algorithm used, while also the decoder throughput and its latency mainly depend on the decoding algorithm. In this work, we implement the powerful successive cancellation list (SCL) decoder on a GPU and identify the bottlenecks of this algorithm with respect to parallel computing and its difficulties. The inherent serial decoding property of the SCL algorithm naturally limits the achievable speed-up gains on GPUs when compared to CPU implementations. In order to increase the decoding throughput, we use a hybrid decoding scheme based on the belief propagation (BP) decoder, which can be intra- and inter-frame parallelized. The proposed scheme combines excellent decoding performance and high throughput within the signal-to-noise ratio (SNR) region of interest.

For finite length polar codes, channel polarization leaves a significant number of channels not fully polarized. Adding a Cyclic Redundancy Check (CRC) to better protect information on the semi-polarized channels has already been successfully applied in the literature, and is straightforward to be used in combination with Successive Cancellation List (SCL) decoding. Belief Propagation (BP) decoding, however, offers more potential for exploiting parallelism in hardware implementation, and thus, we focus our attention on improving the BP decoder. Specifically, similar to the CRC strategy in the SCL-case, we use a short-length “auxiliary” LDPC code together with the polar code to provide a significant improvement in terms of BER. We present the novel concept of “scattered” EXIT charts to design such auxiliary LDPC codes, and achieve net coding gains (i.e. for the same total rate) of 0.4dB at BER of 10-5compared to the conventional BP decoder.