We consider vehicular networking scenarios where existing vehicle-to-vehicle (V2V) links can be leveraged for an effective uploading of large-size data to the network. In particular, we consider a group of vehicles where one vehicle can be designated as the leader and other follower vehicles can offload their data to the leader vehicle or directly upload it to the base station (or a combination of the two). In our proposed framework, the leader vehicle is responsible to receive the data from other vehicles and to process it in order to remove the redundancy before uploading it to the base station. We present a mathematical framework of the considered network. Next, we formulate and solve an optimization problem for selecting the leader vehicle as well as determining the portions of data from other follower vehicles to be offloaded to the leader to take advantage of V2V links in the vehicular network. We also perform simulations to confirm our findings and to compare it with two other alternatives: (1) the follower vehicles offload all their data to the leader vehicle (who will then upload it to the network), and (2) the follower vehicles all upload it directly to the base station. Our numerical results show the superiority of the proposed approach in comparison with these alternatives.

To meet the growing mobility needs in intra-city transportation, the concept of urban air mobility (UAM) has been proposed in which vertical takeoff and landing (VTOL) aircraft are used to provide a ride-hailing service. In UAM, aircraft can operate in designated air spaces known as corridors, that link the aerodromes, thus avoiding the use of complex routing strategies such as those of modern-day helicopters and alleviating the burden on the ground transportation system. For safety, a UAM aircraft must use air-to-ground communications to report flight plan, off-nominal events, and real-time movement to ground base stations (GBSs). A reliable communication network between GBSs and aircraft enables UAM to adequately utilize the airspace and create a fast, efficient, and safe transportation system. In this paper, to characterize the wireless connectivity performance for UAM, a suitable spatial model is proposed. For the considered setup, assuming that any given aircraft communicates with the closest GBS, the distribution of the distance between an arbitrarily selected GBS and its associated aircraft and the Laplace transform of the interference experienced by the GBS are derived. Using these results, the signal-to-interference ratio (SIR)-based connectivity probability is determined to capture the connectivity performance of the UAM aircraft-to-ground communication network. Then, leveraging these connectivity results, a wireless-enabled asynchronous federated learning (AFL) framework that uses a Fourier neural network is proposed to tackle the challenging problem of turbulence prediction during UAM operations. For this AFL scheme, a staleness-aware global aggregation scheme is introduced to expedite the convergence to the optimal turbulence prediction model used by UAM aircraft. Simulation results validate the theoretical derivations for the UAM wireless connectivity. The results also demonstrate that the proposed AFL framework converges to the optimal turbulence prediction model faster than the synchronous federated learning baselines and a staleness-free AFL approach. Furthermore, the results characterize the performance of wireless connectivity and convergence of the aircraft’s turbulence model under different parameter settings, offering useful UAM design guidelines.

The deployment of future intelligent transportation systems is contingent upon seamless and reliable operation of connected and autonomous vehicles (CAVs). One key challenge in developing CAVs is the design of an autonomous controller that can accurately execute near real-time control decisions, such as a quick acceleration when merging to a highway and frequent speed changes in a stop-and-go traffic. However, the use of conventional feedback controllers or traditional learning-based controllers, solely trained by each CAV’s local data, cannot guarantee a robust controller performance over a wide range of road conditions and traffic dynamics. In this paper, a new federated learning (FL) framework enabled by large-scale wireless connectivity is proposed for designing the autonomous controller of CAVs. In this framework, the learning models used by the controllers are collaboratively trained among a group of CAVs. To capture the varying CAV participation in the FL training process and the diverse local data quality among CAVs, a novel dynamic federated proximal (DFP) algorithm is proposed that accounts for the mobility of CAVs, the wireless fading channels, as well as the unbalanced and non-independent and identically distributed data across CAVs. A rigorous convergence analysis is performed for the proposed algorithm to identify how fast the CAVs converge to using the optimal autonomous controller. In particular, the impacts of varying CAV participation in the FL process and diverse CAV data quality on the convergence of the proposed DFP algorithm are explicitly analyzed. Leveraging this analysis, an incentive mechanism based on contract theory is designed to improve the FL convergence speed. Simulation results using real vehicular data traces show that the proposed DFP-based controller can accurately track the target CAV speed over time and under different traffic scenarios. Moreover, the results show that the proposed DFP algorithm has a much faster convergence compared to popular FL algorithms such as federated averaging (FedAvg) and federated proximal (FedProx). The results also validate the feasibility of the contract-theoretic incentive mechanism and show that the proposed mechanism can improve the convergence speed of the DFP algorithm by 40% compared to the baselines.

To meet the growing mobility needs in intra-city transportation, urban air mobility (UAM) has been proposed in which vertical takeoff and landing (VTOL) aircraft are used to provide on-demand service. In UAM, an aircraft can operate in the corridors, i.e., the designated airspace, that link the aerodromes, thus avoiding the use of complex routing strategies such as those of modern-day helicopters. For safety, a UAM aircraft will use air-to-ground communications to report flight plan, off-nominal events, and real-time movements to ground base stations (GBSs). A reliable communication network between GBSs and aircraft enables UAM to adequately utilize the airspace and create a fast, efficient, and safe transportation system. In this paper, to characterize the wireless connectivity performance in UAM, a stochastic geometry-based spatial model is developed. In particular, the distribution of GBSs is modeled as a Poisson point process (PPP), and the aircraft are distributed according to a combination of PPP, Poisson cluster process (PCP), and Poisson line process (PLP). For this setup, assuming that any given aircraft communicates with the closest GBS, the distribution of distance between an arbitrarily selected GBS and its associated aircraft and the Laplace transform of the interference experienced by the GBS are derived. Using these results, the signal-to-interference ra-tio (SIR)-based connectivity probability is determined to capture the connectivity performance of the aircraft-to-ground communication network in UAM. Simulation results validate the theoretical derivations for the UAM wireless connectivity and provide useful UAM design guidelines by showing the connectivity performance under different parameter settings.

A novel multi-task federated learning (FL) framework is proposed in this paper to optimize the traffic prediction models without sharing the collected data among traffic stations. In particular, a divisive hierarchical clustering is first introduced to partition the collected traffic data at each station into different clusters. The FL is then implemented to collaboratively train the learning model for each cluster of local data distributed across the stations. Using the multi-task FL framework, the route planning is studied where the road map is modeled as a time-dependent graph and a modified A * algorithm is used to determine the route with the shortest traveling time. Simulation results showcase the prediction accuracy improvement of the proposed multi-task FL framework over two baseline schemes. The simulation results also show that, when using the multi-task FL framework in the route planning, an accurate traveling time can be estimated and an effective route can be selected.

Unmanned aerial vehicle (UAV) swarms must exploit machine learning (ML) in order to execute various tasks ranging from coordinated trajectory planning to cooperative target recognition. However, due to the lack of continuous connections between the UAV swarm and ground base stations (BSs), using centralized ML will be challenging, particularly when dealing with a large volume of data. In this paper, a novel framework is proposed to implement distributed federated learning (FL) algorithms within a UAV swarm that consists of a leading UAV and several following UAVs. Each following UAV trains a local FL model based on its collected data and then sends this trained local model to the leading UAV who will aggregate the received models, generate a global FL model, and transmit it to followers over the intra-swarm network. To identify how wireless factors, like fading, transmission delay, and UAV antenna angle deviations resulting from wind and mechanical vibrations, impact the performance of FL, a rigorous convergence analysis for FL is performed. Then, a joint power allocation and scheduling design is proposed to optimize the convergence rate of FL while taking into account the energy consumption during convergence and the delay requirement imposed by the swarm's control system. Simulation results validate the effectiveness of the FL convergence analysis and show that the joint design strategy can reduce the number of communication rounds needed for convergence by as much as 35% compared with the baseline design.

Vehicular networks will play an important role in enhancing road safety, improving transportation efficiency, and providing seamless Internet service for users on the road. Reaping the benefit of vehicular networks is contingent upon meeting stringent wireless communication performance requirements, particularly in terms of delay and reliability. In this paper, a dependence control mechanism is proposed to improve the overall reliability of vehicular networks. In particular, the dependence between the communication delays of different vehicle-to-vehicle (V2V) links is first modeled. Then, the concept of a concordance order, stemming from stochastic ordering theory, is introduced to show that a higher dependence can lead to a better reliability. Using this insight, a power allocation problem is formulated to maximize the concordance, thereby optimizing the overall communication reliability of the V2V system. To obtain an efficient solution to the power allocation problem, a dual update method is introduced. Simulation results verify the effectiveness of performing dependence control for reliability optimization in a vehicular network, and show that the proposed mechanism can achieve up to 25% reliability gain compared to a baseline system that uses a random power allocation.

Connected and autonomous vehicles (CAVs) are able to improve on-road safety and provide convenience in our daily lives. To perform autonomous path tracking and navigation, CAVs can exploit vehicle-to-everything (V2X) communications to determine their vehicle dynamics parameters, such as location, heading angle, and curvature, which can be then used as inputs to their control system. However, the interference and uncertainty of the wireless channels can increase the transmission delay on the vehicle dynamics and, thus, impair the CAV's ability to track its target path. In this paper, the problem of joint communication network and control system design is studied to solve the path tracking problem for CAVs. In particular, a novel approach is proposed to maximize the number of reliable V2X transmitter-receiver pairs while jointly considering the stability of the controller and the state of the wireless network. Based on the joint design, the maximum transmission delay which can prevent instability in the controller is determined. Then, the reliable V2X links maximization problem is decomposed into two equivalent sub-problems. The first sub-problem is the control mechanism design in which a dual update method is used to determine the headway distance parameter for the control system. The second sub-problem uses the outcome of the first sub-problem to optimize the power allocation for the communication system. To solve this power allocation problem, a novel risk-based approach that uses the so-called conditional value at risk (CVaR) from financial engineering is proposed. Simulation results validate the theoretical results and show that the proposed joint design can improve the number of reliable V2X pairs by as much as 70% compared to a baseline scheme that optimizes the communication and control systems independently.

Autonomous vehicular platoons will play an important role in improving on-road safety in tomorrow’s smart cities. Vehicles in an autonomous platoon can exploit vehicle-to-vehicle (V2V) communications to collect environmental information so as to maintain the target velocity and inter-vehicle distance. However, due to the uncertainty of the wireless channel, V2V communications within a platoon will experience a wireless system delay. Such system delay can impair the vehicles’ ability to stabilize their velocity and distances within their platoon. In this paper, the problem of integrated communication and control system is studied for wireless connected autonomous vehicular platoons. In particular, a novel framework is proposed for optimizing a platoon’s operation while jointly taking into account the delay of the wireless V2V network and the stability of the vehicle’s control system. First, stability analysis for the control system is performed and the maximum wireless system delay requirements which can prevent the instability of the control system are derived. Then, delay analysis is conducted to determine the end-to-end delay, including queuing, processing, and transmission delay for the V2V link in the wireless network. Subsequently, using the derived wireless delay, a lower bound and an approximated expression of the reliability for the wireless system, defined as the probability that the wireless system meets the control system’s delay needs, are derived. Then, the parameters of the control system are optimized in a way to maximize the derived wireless system reliability. Simulation results corroborate the analytical derivations and study the impact of parameters, such as the packet size and the platoon size, on the reliability performance of the vehicular platoon. More importantly, the simulation results shed light on the benefits of integrating control system and wireless network design while providing guidelines for designing an autonomous platoon so as to realize the required wireless network reliability and control system stability.

Device-to-device (D2D) communication is a promising approach to efficiently disseminate critical or viral information. Reaping the benefits of D2D-enabled networks is contingent upon choosing the optimal content dissemination policy subject to resource and user distribution constraints. In this paper, a novel D2D network analysis framework is proposed to study the impacts of frequently occurring subgraphs, known as motifs, on D2D network performance and to determine an effective content dissemination strategy. In the proposed framework, the distribution of devices in the D2D network is modeled as a Thomas cluster process (TCP), and two graph structures, the star, and chain motifs, are studied in the communication graph. Based on the properties of the TCP, the closed-form analytical expressions for the statistical significance, the outage probability, as well as the average throughput per device, are derived. The simulation results corroborate the analytical derivations and show the influence of different system topologies on the occurrence of motifs and the D2D system throughput. More importantly, the results highlight that, as the statistical significance of motifs increases, the system throughput will initially increase and then subsequently decreases. Hence, the network operators can obtain statistical significance regions for chain and star motifs that map to the optimal content dissemination performance. Furthermore, using the obtained regions and the analytical expressions for statistical significance, network operators can effectively identify which clusters of devices can be leveraged for D2D communications while determining the number of serving devices in each identified cluster.

Vehicle platoons will play an important role in improving on-road safety in tomorrow's smart cities. Vehicles in a platoon can exploit vehicle- to-vehicle (V2V) communications to collect information, such as velocity and acceleration, from surrounding vehicles so as to coordinate their operations and maintain the target velocity and inter-vehicle distance required by the platoon. However, due to the interference and uncertainty of the wireless channel, V2V communications within a platoon will experience a wireless transmission delay which can impair the vehicles' ability to stabilize their speed and distances within their platoon. In this paper, the problem of integrated communication and control is studied for wireless-connected platoons. In particular, a novel approach is proposed for optimizing a platoon's stability while taking into account, jointly, the state of the wireless V2V network and the stability of the platoon's control system. Based on the proposed integrated communication and control strategy, the plant and string stability for the platoon are analyzed. The signal-to-interference-plus-noise-ratio (SINR) threshold, which will prevent the instability of the control system, is also determined. Moreover, the reliability of the wireless system, defined as the probability that the wireless system meets the control system's delay needs, is derived. Simulation results shed light on the benefits of the proposed approach and the synergies between the wireless network and the platoon's control system.

Ambient backscatter, a new communication technology, can permit battery-free devices to communicate with other devices through reflecting the ambient radio frequency signals. One challenge for ambient backscatter communication system is to recover the backscattered information bits hidden in the received signals. Existing solutions are mainly based on energy detector and thus provide poor performance at low signal noise ratio (SNR). To solve this problem, a detection algorithm based on statistical covariances is suggested in this paper. Specifically, we calculate the distributions of two covariance-based statistics, design the detection rule, and then derive the closed- form expressions for detection probability and bit error rate (BER). It is found that our proposed algorithm outperforms the energy detector at low SNR regions. Finally, the simulation results are provided to corroborate our theoretical studies.