We propose a neural network (NN)-based algorithm for device detection and time of arrival (ToA) and carrier frequency offset (CFO) estimation for the narrowband physical random-access channel (NPRACH) of narrowband internet of things (NB-IoT). The introduced NN architecture leverages residual convolutional networks as well as knowledge of the preamble structure of the 5G New Radio (5G NR) specifications. Benchmarking on a 3rd Generation Partnership Project (3GPP) urban microcell (UMi) channel model with random drops of users against a state-of-the-art baseline shows that the proposed method enables up to 8 dB gains in false negative rate (FNR) as well as significant gains in false positive rate (FPR) and ToA and CFO estimation accuracy. Moreover, our simulations indicate that the proposed algorithm enables gains over a wide range of channel conditions, CFOs, and transmission probabilities. The introduced synchronization method operates at the base station (BS) and, therefore, introduces no additional complexity on the user devices. It could lead to an extension of battery lifetime by reducing the preamble length or the transmit power. Our code is available at: https://github.com/NVlabs/nprach_synch/.

In orthogonal frequency division multiplexing (OFDM)-based wireless communication systems, the bit error rate (BER) performance is heavily dependent on the accuracy of channel estimation. It is important for a good channel estimator to be capable of handling the changes in the wireless channel conditions that occur due to the mobility of the users. In recent years, the focus has been on developing complex neural network (NN)-based channel estimators that enable an error performance close to that of a genie-aided channel estimator. This work considers the other alternative which is to have a simple channel estimator but a more complex NN-based demapper for the generation of soft information for each transmitted bit. In particular, the problem of reversing the adverse effects of an imperfect channel estimator is addressed, and a convolutional self-attention-based neural demapper that significantly outperforms the baseline is proposed.

We propose a learning-based method for the joint design of a transmit and receive filter, the constellation geometry and associated bit labeling, as well as a neural network (NN)-based detector. The method maximizes an achievable information rate, while simultaneously satisfying constraints on the adjacent channel leakage ratio (ACLR) and peak-to-average power ratio (PAPR). This allows control of the tradeoff between spectral containment, peak power, and communication rate. Evaluation on an additive white Gaussian noise (AWGN) channel shows significant reduction of ACLR and PAPR compared to a conventional baseline relying on quadrature amplitude modulation (QAM) and root-raised-cosine (RRC), without significant loss of information rate. When considering a 3rd Generation Partnership Project (3GPP) multipath channel, the learned waveform and neural receiver enable competitive or higher rates than an orthogonal frequency division multiplexing (OFDM) baseline, while reducing the ACLR by$\mathrm {10~ \text {dB}}$and the PAPR by$\mathrm {2~ \text {dB}}$. The proposed method incurs no additional complexity on the transmitter side and might be an attractive tool for waveform design of beyond-5G systems.

The benefits of end-to-end learning has been demonstrated over AWGN channels but has not yet been quantified over realistic wireless channel models. This work aims to fill this gap by exploring the gains of end-to-end learning over a frequency- and time-selective fading channel using OFDM. With imperfect channel knowledge at the receiver, the shaping gains observed on AWGN channels vanish. Nonetheless, we identify two other sources of performance improvements. The first comes from a neural network-based receiver operating over a large number of subcarriers and OFDM symbols which allows to reduce the number of orthogonal pilots without loss of BER. The second comes from entirely eliminating orthogonal pilots by jointly learning a neural receiver together with either superimposed pilots (SIPs), combined with conventional QAM, or an optimized constellation. The learned constellation works for a wide range of signal-to-noise ratios, Doppler and delay spreads, has zero mean and does hence not contain any form of SIP. Both schemes achieve the same BER as the pilot-based baseline with 7% higher throughput. Thus, we believe that a jointly learned transmitter and receiver are a very interesting component for beyond-5G communication systems which could remove the need and associated overhead for demodulation reference signals.

Machine learning (ML) starts to be widely used to enhance the performance of multi-user multiple-input multiple-output (MU-MIMO) receivers. However, it is still unclear if such methods are truly competitive with respect to conventional methods in realistic scenarios and under practical constraints. In addition to enabling accurate signal reconstruction on realistic channel models, MU-MIMO receive algorithms must allow for easy adaptation to a varying number of users without the need for retraining. In contrast to existing work, we propose an machine learning (ML)-enhanced MU-MIMO receiver that builds on top of a conventional linear minimum mean squared error (LMMSE) architecture. It preserves the interpretability and scalability of the LMMSE receiver, while improving its accuracy in two ways. First, convolutional neural networks (CNNs) are used to compute an approximation of the second-order statistics of the channel estimation error which are required for accurate equalization. Second, a CNN-based demapper jointly processes a large number of orthogonal frequency-division multiplexing (OFDM) symbols and subcarriers, which allows it to compute better log likelihood ratios (LLRs) by compensating for channel aging. The resulting architecture can be used in the up- and downlink and is trained in an end-to-end manner, removing the need for hard-to-get perfect channel state information (CSI) during the training phase. Simulation results demonstrate consistent performance improvements over the baseline which are especially pronounced in high mobility scenarios.

We introduce a trainable coded modulation scheme that enables joint optimization of the bit-wise mutual information (BMI) through probabilistic shaping, geometric shaping, bit labeling, and demapping for a specific channel model and for a wide range of signal-to-noise ratios (SNRs). Compared to probabilistic amplitude shaping (PAS), the proposed approach is not restricted to symmetric probability distributions, can be optimized for any channel model, and works with any code rate k/m, m being the number of bits per channel use and k an integer within the range from 1 to m-1. The proposed scheme enables learning of a continuum of constellation geometries and probability distributions determined by the SNR. Additionally, the PAS architecture with Maxwell-Boltzmann (MB) as shaping distribution was extended with a neural network (NN) that controls the MB shaping of a quadrature amplitude modulation (QAM) constellation according to the SNR, enabling learning of a continuum of MB distributions for QAM. Simulations were performed to benchmark the performance of the proposed joint probabilistic and geometric shaping scheme on additive white Gaussian noise (AWGN) and mismatched Rayleigh block fading (RBF) channels.

We consider a trainable point-to-point communication system, where both transmitter and receiver are implemented as neural networks (NNs), and demonstrate that training on the bit-wise mutual information (BMI) allows seamless integration with practical bit-metric decoding (BMD) receivers, as well as joint optimization of constellation shaping and labeling. Moreover, we present a fully differentiable neural iterative demapping and decoding (IDD) structure which achieves significant gains on additive white Gaussian noise (AWGN) channels using a standard 802.11n low-density parity-check (LDPC) code. The strength of this approach is that it can be applied to arbitrary channels without any modifications. Going one step further, we show that careful code design can lead to further performance improvements. Lastly, we show the viability of the proposed system through implementation on software-defined radios (SDRs) and training of the end-to-end system on the actual wireless channel. Experimental results reveal that the proposed method enables significant gains compared to conventional techniques.

End-to-end learning of communication systems enables joint optimization of transmitter and receiver, implemented as deep neural network (NN)-based autoencoders, over any type of channel and for an arbitrary performance metric. Recently, an alternating training procedure was proposed which eliminates the need for an explicit channel model. However, this approach requires feedback of real-valued losses from the receiver to the transmitter during training. In this paper, we first show that alternating training works even with a noisy feedback channel. Then, we design a system that learns to transmit real numbers over an unknown channel without a preexisting feedback link. Once trained, this feedback system can be used to communicate losses during alternating training of autoencoders. Evaluations over additive white Gaussian noise (AWGN) and Rayleigh block-fading (RBF) channels show that end-to-end communication systems trained using the proposed feedback system achieve the same performance as when trained with a perfect feedback link.

The idea of end-to-end learning of communication systems through neural network (NN)-based autoencoders has the shortcoming that it requires a differentiable channel model. We present in this paper a novel learning algorithm which alleviates this problem. The algorithm enables training of communication systems with an unknown channel model or with non-differentiable components. It iterates between training of the receiver using the true gradient, and training of the transmitter using an approximation of the gradient. We show that this approach works as well as model-based training for a variety of channels and tasks. Moreover, we demonstrate the algorithm's practical viability through hardware implementation on software defined radios (SDRs) where it achieves state-of-the-art performance over a coaxial cable and wireless channel.

Energy harvesting technologies are constantly evolving to help power sensor network nodes. Ranging from miniature power solar panels to micro wind turbines, nodes still express a deep need to harvest energies in order to keep both good performance level and energy autonomy. Recently, the simultaneous use of multiple sources has been proposed to tackle the time-varying characteristics of certain sources that can induce energy scarcity period and thus alter the node performance. In this context, this paper presents a methodology aimed at classifying the energy sources to choose the most efficient energy manager. As sensor nodes are embedded devices, it is necessary to ensure a balance between computational effort and classification accuracy. Feature extraction and selection phases can be processed and analyzed offline before deployment, and only a subset of features will be needed by the nodes to achieve efficient energy management. Simulations on real energy traces show that the proposed approach achieves classification accuracy higher than 95% through the computation of 4 features only.

Intelligent connected objects, which build the IoT, are electronic devices usually supplied by batteries that significantly limit their life-time. These devices are expected to be deployed in very large numbers, and manual replacement of their batteries will severely restrict their large-scale or wide-area deployments. Therefore energy efficiency is of the utmost importance in the design of these devices. The wireless communication between the distributed sensor devices and the host stations can consume significant energy, even more when data needs to reach several kilometers of distance. In this paper, we present an energy-efficient multi-sensing platform that exploits energy harvesting, long-range communication and ultra-low-power short-range wake-up radio to achieve self sustainability in a kilometer range network. The proposed platform is designed with power efficiency in mind and exploits the always-on wake-up radio as both receiver and a power management unit to significantly reduce the quiescent current even continuously listening the wireless channel. Moreover the platform allows the building of an heterogeneous long-short range network architecture to reduce the latency and reduce the power consumption in listening phase at only 4.6 μW. Experimental results and simulations demonstrate the benefits of the proposed platform and heterogeneous network.

Energy harvesting is a promising approach to enable autonomous long-life wireless sensor networks. As typical energy sources present time-varying behavior, each node embeds an energy manager, which dynamically adapts the power consumption of the node to maximize the quality of service, while preventing power failure. In this work, RLMan, a novel energy management scheme based on reinforcement learning theory, is proposed. RLMan dynamically adapts its policy to time-varying environment by continuously exploring, while exploiting the current knowledge to improve the quality of service. The proposed energy management scheme has a very low memory footprint, and requires very few computational power, which makes it suitable for online execution on sensor nodes. Moreover, it only necessitates the state of charge of the energy storage device as an input, and therefore is practical to implement. RLMan was compared to three state-of-the-art energy management schemes, using simulations and energy traces from real measurements. Results show that using RLMan can enable almost 70 % gains regarding the average throughput.

Wireless sensor networks are employed in many applications, such as health care, environmental sensing, and industrial monitoring. An important research issue is the design of efficient medium access control (MAC) protocols, which have an essential role for the reliability, latency, throughput, and energy efficiency of communication, especially as communication is typically one of the most energy consuming tasks. Therefore, analytical models providing a clear understanding of the fundamental limitations of the different MAC schemes, as well as convenient way to investigate their performance and optimize their parameters, are required. In this paper, we propose a generic framework for modeling MAC protocols, which focuses on energy consumption, latency, and reliability. The framework is based on absorbing Markov chains, and can be used to compare different schemes and evaluate new approaches. The different steps required to model a specific MAC using the proposed framework are illustrated through a study case. Moreover, to exemplify how the proposed framework can be used to evaluate new MAC paradigms, evaluation of the novel pure-asynchronous approach, enabled by emerging ultra-low-power wake-up receivers, is done using the proposed framework. Experimental measurements on real hardware were performed to set framework parameters with accurate energy consumption and latency values, to validate the framework, and to support our results.

Low power communication has evolved towards multi-kilometer ranges and low bit-rate schemes in recent years. LoRa is an example of such a long-range technology that is triggering increasing interest. Using these technologies, a trade-off must be made between power consumption and latency for message transfer from the gateway to the nodes. However, domains such as industrial applications in which sensors and actuators are part of the control loop require predictable latency, as well as low power consumption. These requirements can be fulfilled using pure-asynchronous communication and idle listening elimination, allowed by emerging ultra-low-power wake-up receivers. On the other hand, state-of-the-art wake-up receivers present low sensitivity compared to traditional wireless node receivers and LoRa, which results in the fact that they can operate in short-range in the order of a few tens of meters. In this work, we propose an energy efficient architecture that combines long-range communication with ultra low-power short-range wake-up receivers to achieve both energy efficient and low latency communication in heterogeneous long-short range networks. The proposed hardware architecture uses a single radio transceiver that can communicate using both LoRa and state-of-the-art wake-up receivers while the proposed MAC protocol exploits the benefits of these two communication schemes. Experimental measurements and analytical comparisons show the benefits regarding both energy efficiency and latency enabled by the proposed approach. Analytical comparisons show that the proposed scheme allows up to 3000 times reduction of the power consumption compared to the standard LoRa approach.

Achieving energy efficient wireless communication is the most pursued goal in Wireless Sensor Networks (WSNs), as energy consumption is typically a major barrier to long term applications. In recent years, ultra-low power Wake-up Receivers (WuRx) have emerged, enabling pure asynchronous wireless communication that eliminates energy waste due to idle listening. However, to achieve a significant increase of energy efficiency compared to traditional duty-cycling approaches, Medium Access Control (MAC) protocols exploiting WuRx must be carefully designed. Therefore, we propose an analytical framework to model MAC protocols, leveraging WuRx or not, which gives an important evaluation of power consumption, latency and reliability. This framework was used to both model a WuRx-based MAC protocol, and to model two other state-of-the art MAC protocols for WSNs not using WuRx. Experimental power consumption and latency measurements were conducted to validate the proposed framework and the MAC protocol leveraging WuRx. Analytical results show the convenience of using WuRx and quantify the benefits of this emerging technology. These results demonstrate that using WuRx achieves up to 135 times lower power consumption and up to 23 times lower latency compared to traditional approaches in typical low throughput WSNs applications.

This paper addresses the problem of In-phase/Quadrature (I/Q) imbalance sensitivity of communication systems when it occurs at both Transmitter (TX) and Receiver (RX) sides of an optical coherent system. A novel blind technique is proposed based on the pseudo-rotation of the M-QAM constellation. The pseudo-rotation based compensator is a generic approach, because it does not depend on the modulation order and the level of imbalance. To implement the proposed compensation in practical systems, two algorithms are proposed: Recursive Pseudo-Rotation (RPR) that achieves the performance of the ideal compensator and LRPR, a Low complexity version of RPR. Monte Carlo simulation results show that the proposed compensator outperforms state-of-the-art algorithms for an Additive White Gaussian Noise (AWGN) and the complexity/performance trade-off is also discussed. The efficiency of the proposed method is experimentally validated with a 10 Gbaud QPSK optical system showing its operation in the presence of Inter-Symbol Interference (ISI).

Power management is an important issue in the design of Energy Harvesting Wireless Sensor Networks (EH-WSNs). In this kind of networks, each Energy Harvesting Node (EH-node) must dynamically adapt its performance in order to avoid power failures while maintaining a good quality of service. The power management policy is implemented on each node by a Power Manager (PM). Designing a PM is challenging because the harvested energy is time varying, and the amount of energy that will be harvested in the future is hard to predict. In this work, we present Fuzzyman, a novel PM based on fuzzy control theory. Because of the unpredictability of the harvested energy, fuzzy control theory constitutes an appropriate framework to tackle the problem of designing PM for EH-nodes. We evaluate the performance of Fuzzyman by comparing it to a state of the art approach via extensive trace-driven network simulations. Results show that Fuzzyman achieves more efficient utilization of the harvested energy.

Long lifetime is the most pursued goal in Wireless Sensor Networks (WSNs). As communication is typically the most energy consuming task, a lot of effort has been devoted to design energy efficient communication protocols using duty-cycling in the last decades. However, in the recent years, a new kind of Ultra Low Power (ULP) receivers, called Wake-up Receivers (WuRx), is emerging. These devices allow the continuous monitoring of the wireless channel while having a power consumption orders of magnitude less than typical WSNs transceivers. WuRx can wake-up the rest of the system (microcontroller (MCU) and main radio) using interrupts only when needed, minimizing the idle listening. In this work, we present an experimental and an analytical study which ultimately serve as guidelines for the design of communication protocols leveraging WuRx.

In this work, Wireless Sensor Network (WSN) applications that require long-term sustainability are considered. Energy harvesting forms a promising technology to address this challenge, by allowing each node to be entirely powered by energy harvested from its environment. To be sustainable, each node must dynamically adapt its Quality of Service (QoS), regarding the harvested energy using a power management strategy. This strategy is implemented on each node by the Power Manager (PM). In this paper, GRAPMAN (GRAdual Power MANager) is proposed, a novel PM for Energy-Harvesting WSN (EH-WSN) powered by pseudo-periodic energy sources. Unlike most state of the art PMs, GRAPMAN aims to achieve high average throughput while maintaining consistent QoS, i.e. with low fluctuations with respect to time, by looking for the highest throughput that can be supplied by the node over a finite time horizon while remaining sustainable. We show through extensive trace-driven network simulations that GRAPMAN outperforms state of the art PMs in both average throughput and throughput consistency.