Next-generation 6G wireless systems aim to improve spectral efficiency and user fairness by leveraging Movable Arrays (MA) and Reconfigurable Intelligent Surfaces (RIS). However, the joint optimization of antenna positions and RIS phase shifts leads to high-dimensional, non-convex problems that are computationally prohibitive for real-time deployment within channel coherence times. This paper proposes a pre-optimization method framework using an adaptive Multifactorial Evolutionary Algorithm (MFEA). We consider multiple propagation conditions and formulate three concurrent objective-driven tasks that target sum-rate maximization, user fairness (min-rate maximization), and energy efficiency, respectively. By exploiting inter-task knowledge transfer, the proposed adaptive MFEA evolves a single antenna layout that is robust across diverse operating conditions. We incorporate an adaptive Random Mating Probability (RMP) mechanism based on transfer-offspring survival to regulate cross-task knowledge transfer. Experimental results show that the pre-optimized layout recovers over 98% of the performance of real-time optimization while effectively eliminating online optimization latency. Compared with conventional uniform square planar arrays, our approach yields consistently stronger performance, providing a robust hardware configuration for dynamic 6G deployments.

To achieve ubiquitous connectivity over heterogeneous environments, we study a three-dimensional integrated architecture where a Low-Earth-Orbit (LEO) satellite complements a terrestrial cell-free Massive MIMO system. Under imperfect channel state information (CSI), we derive closed-form expressions for the uplink ergodic throughput using maximum-ratio combining (MRC) over spatially correlated Rician fading channels. To enhance user fairness, we formulate a max-min throughput optimization problem that jointly optimizes user association and transmit power allocation. The resulting mixed-integer nonlinear programming problem is NP-hard due to the coupling between binary association variables and continuous power control variables. To tackle this challenge, we propose a hybrid Quantum-Behaved Particle Swarm Optimization with Differential Evolution mutation (QPSO-DE) framework. Unlike classical particle swarm optimization, which relies on deterministic velocity updates, the proposed QPSO-DE adopts quantum-inspired probabilistic position sampling based on wave-function collapse, enabling non-local exploration of the solution space. Furthermore, when convergence stagnation is detected, a differential evolution-based mutation mechanism exploits population diversity to escape local optima. Numerical results demonstrate that the proposed space-terrestrial architecture substantially improves user fairness, while the QPSO-DE algorithm outperforms existing benchmark schemes across diverse network sizes and deployment scenarios.

This paper examines wireless-powered Internet of Things (IoT) networks involving multiple unmanned aerial vehicles (UAVs) equipped with backscatter and caching technologies to relay and transmit signals. For data communication and energy harvesting (EH), the source transmits information and power to UAVs using the dynamic time splitting (DTS) method. UAVs use harvested energy for passive communication (backscatter) and for active communication (transmitting information) to the destination. The primary objective is to maximize the total throughput by jointly optimizing the DTS ratio, trajectory, and transmission power, leveraging the UAVs’ caching capability. This optimization problem is challenging due to its non-convexity. Therefore, an efficient alternating algorithm using the block coordinate descent (BCD) method is proposed to optimize each variable given the fixed values of the other parameters. By applying the Karush-Kuhn-Tucker (KKT) conditions, we derive a closed-form expression for the optimal DTS ratio, significantly reducing computation time. The optimal values for the other two parameters are determined using the BCD. In order to thoroughly assess the effectiveness of various solutions for the original problem, this paper introduces an approach leveraging a genetic algorithm (GA). The GA in this context employs a one-point crossover method, value mutation, and rank-based selection based on fitness values. Numerical results show that the BCD and GA achieve at least 31% throughput improvement over the benchmarks, with reduced computational time. These findings demonstrate the performance gain and practical feasibility of our solutions in caching-enabled UAV-aided IoT networks.

Integrated sensing and communication (ISAC) with cloud radio access networks (C-RAN) unifies two foundational technologies for the Internet of Things (IoT), enabling both high-data-rate transmission and accurate environmental awareness. This paper investigates an uplink C-RAN system where multiple remote radio units (RRUs) jointly serve user equipment devices (UEs) and sense a target. We demonstrate that only a subset of RRUs is typically needed to meet sensing requirements, while energy is potentially conserved by deactivating redundant sensing RRUs. Motivated by this, we aim to improve the system’s energy efficiency (EE) by jointly optimizing RRU activation, user association, and power allocation, while ensuring localization accuracy through the Cram´er-Rao lower bound (CRLB). To address this problem, we propose a model-based iterative algorithm that integrates optimal user association, decision tree-based selection of sensing RRUs, and fixed-point power allocation. This algorithm is further used to train a graph neural network (GNN) framework, ISAC-GNN, to overcome scalability and computational complexity limitations. Our theoretical analysis ensures performance guarantees, while a semi-supervised training strategy enhances stability and generalization. Simulation results demonstrate that ISAC-GNN reduces inference time by 67% relative to the model-based approach, enabling real-time implementation for ISAC system resource management. In addition, ISAC-GNN allows scalable deployment across various system scenarios without retraining the model.

Ensuring reliable transmission and secure communication remains a critical challenge for next-generation wireless networks, particularly in the context of sixth-generation (6G) and Internet of Things (IoT) systems. This paper investigates the reliability and physical layer security of active reconfigurable intelligent surface (ARIS)-assisted dual-hop relaying in non-orthogonal multiple access (NOMA) networks over Nakagami-mfading channels. We develop a comprehensive system model where a base station communicates with two users via a relay and an ARIS, in the presence of a potential eavesdropper. Closed-form expressions for outage probability (OP) and intercept probability (IP) are derived for both near and far users, capturing the effects of ARIS configuration, power allocation, and channel fading. Extensive Monte Carlo simulations confirm the accuracy of the analytical results and reveal that increasing the number of ARIS elements, optimizing amplification factors, and carefully allocating power can significantly enhance both reliability and secrecy performance. The findings provide valuable insights for the design of robust and secure ARIS-assisted NOMA networks in practical wireless environments.

There has been a growing trend toward leveraging machine learning (ML) and deep learning (DL) techniques to optimize and enhance the performance of wireless communication systems. However, limited attention has been given to the vulnerabilities of these techniques, particularly in the presence of adversarial attacks. This paper investigates the adversarial attack and defense in distributed multiple reconfigurable intelligent surfaces (RISs)-aided multiple-input multiple-output (MIMO) communication systems-based autoencoder in finite scattering environments. We present the channel propagation model for distributed multiple RIS, including statistical information driven in closed form for the aggregated channel. The symbol error rate (SER) is selected to evaluate the collaborative dynamics between the distributed RISs and MIMO communication in depth. The relationship between the number of RISs and the SER of the proposed system based on an autoencoder, as well as the impact of adversarial attacks on the system’s SER, is analyzed in detail. We also propose a defense mechanism based on adversarial training against the considered attacks to enhance the model’s robustness. Numerical results indicate that increasing the number of RISs effectively reduces the system’s SER but leads to the adversarial attack-based algorithm becoming more destructive in the white-box attack scenario. The proposed defense method demonstrates strong effectiveness by significantly mitigating the attack’s impact. It also substantially reduces the system’s SER in the absence of an attack compared to the original model. Moreover, we extend the phenomenon to include decoder mobility, demonstrating that the proposed method maintains robustness under Doppler-induced channel variations.

In personalized Federated Learning (pFL), high data heterogeneity can cause significant gradient divergence across devices, adversely affecting the learning process. This divergence, especially when gradients from different users form an obtuse angle during aggregation, can negate progress, leading to severe weight and gradient update degradation. To address this issue, we introduce a new approach to pFL design, namely Federated Learning with Layer-wise Aggregation via Gradient Analysis (FedLAG), utilizing the concept of gradient conflict at the layer level. Specifically, when layer-wise gradients of different clients form acute angles, those gradients align in the same direction, enabling updates across different clients toward identifying client-invariant features. Conversely, when layer-wise gradient pairs make create obtuse angles, the layers tend to focus on client-specific tasks. In hindsights, FedLAG assigns layers for personalization based on the extent of layer-wise gradient conflicts. Specifically, layers with gradient conflicts are excluded from the global aggregation process. The theoretical evaluation demonstrates that when integrated into other pFL baselines, FedLAG enhances pFL performance by a certain margin. Therefore, our proposed method achieves superior convergence behavior compared with other baselines. Extensive experiments show that our FedLAG outperforms several state-of-the-art methods and can be easily incorporated with many existing methods to further enhance performance.

Cell-free massive multiple-input multiple-output is a potential candidate for future networks with pervasive connectivity by utilizing coherent joint transmission and distributed antenna arrays. This paper studies the exploitation of full-duplex communication for a distributed antenna array. Specifically, we derive a closed-form expression for the uplink and downlink ergodic spectral efficiency (SE) for a network where the APs can flexibly operate in either the full-duplex or half-duplex mode with linear processing and Rayleigh fading channels. A long-term total SE maximization problem is formulated subject to a network operation model and individual SE requirements with limited power budget. Due to the intrinsic nonconvexity and infeasible circumstances where some UEs might not be able to achieve the rate requirements, we adapt differential evolution to design a low computational complexity algorithm that can attain good power allocation and network operation mode in polynomial time. Numerical results demonstrate the effectiveness of our system design and proposed algorithm over state-of-the-art benchmarks with satisfactory service to the majority of UEs, although several ones may be unscheduled under harsh conditions.

This paper presents an application of differential evolution in optimizing the exploitation of full-duplex communication for Cell-Free Massive Multiple Input Multiple Output (CF-mMIMO), a potential candidate for 6G networks. This paper proposes a new dynamic network-assisted full-duplex CF-mMIMO network, where access points can operate in either half-duplex or full-duplex mode, and each full-duplex access point can serve uplink and downlink users simultaneously. A long-term total spectral efficiency maximization problem is formulated subject to a network operation model and individual spectral efficiency requirements with a limited power budget. Due to the intrinsic nonconvexity and infeasible circumstances where some users might not achieve the rate requirements, we adapt differential evolution to design a low computational complexity algorithm, attaining good power allocation and network operation mode in polynomial time. We further analytically investigate the number of generations required to reach the optimal solution. Numerical results demonstrate the effectiveness of our system design and proposed algorithm over state-of-the-art benchmarks. The network can offer satisfactory service to most users, although several may be unscheduled under harsh conditions.

In wireless communication networks, it is difficult to solve many NP-hard problems owing to computational complexity and high cost. Recently, quantum annealing (QA) based on quantum physics was introduced as a key enabler for solving optimization problems quickly. However, only some studies consider quantum-based approaches in wireless communications. Therefore, we investigate the performance of a QA solution to an optimization problem in wireless networks. Specifically, we aim to maximize the sum rate by jointly optimizing clustering, subchannel assignment, and power allocation in a multiautonomous aerial vehicle-aided wireless network. We formulate the sum rate maximization problem as a combinatorial optimization problem. Then, we divide it into two subproblems: 1) a QA-based clustering and 2) subchannel assignment and power allocation for a given clustering configuration. Subsequently, we obtain an optimized solution for the joint optimization problem by solving these two subproblems. For the first subproblem, we convert the problem into a simplified quadratic unconstrained binary optimization (QUBO) model. As for the second subproblem, we introduce a novel QA algorithm with optimal scaling parameters to address it. Simulation results demonstrate the effectiveness of the proposed algorithm in terms of the sum rate and running time.

Wireless-powered communications (WPCs) are increasingly crucial for extending the lifespan of low-power Internet of Things (IoT) devices. Furthermore, reconfigurable intelligent surfaces (RISs) can create favorable electromagnetic environments by providing alternative signal paths to counteract blockages. The strategic integration of WPC and RIS technologies can significantly enhance energy transfer and data transmission efficiency. However, passive RISs suffer from double-fading attenuation over RIS-aided cascaded links. In this article, we propose the application of an active RIS within WPC-enabled IoT networks. The enhanced flexibility of the active RIS in terms of energy transfer and information transmission is investigated using adjustable parameters. We derive novel closed-form expressions for the ergodic rate and outage probability by incorporating key parameters, including signal amplification, active noise, power consumption, and phase quantization errors. Additionally, we explore the optimization of WPC scenarios, focusing on the time-switching factor and power consumption of the active RIS. The results validate our analysis, demonstrating that an active RIS significantly enhances WPC performance compared to a passive RIS.

Reconfigurable intelligent surfaces (RISs) are emerging as a transformative technology for sixth-generation (6G) wireless networks. They enable dynamic manipulation of the propagation environment to enhance signal coverage, mitigate interference, and improve spectral and energy efficiencies. However, this flexibility introduces significant security vulnerabilities when RISs are maliciously controlled. This study explores the threats posed by such RISs, focusing on their potential to compromise the security and integrity of 6G networks. From an adversarial perspective, we analyze key attack vectors, including sophisticated jamming attacks that disrupt communication, eavesdropping attacks that intercept communications, and pilot contamination attacks that impair channel estimation accuracy, all contributing to severe performance degradation. For each attack, we detail the underlying mechanisms and adversarial optimization strategies designed to maximize impact. A case study quantifies the practical effects of these malicious RIS-based attacks in a simulated 6G network scenario. This research emphasizes the critical need for robust defense mechanisms and proposes essential research directions to address the evolving threats from malicious RISs, ensuring the security of 6G networks.

This paper investigates a joint active and passive beamforming design for distributed simultaneous transmitting and reflecting (STAR) reconfigurable intelligent surface (RIS) assisted multi-user (MU)- mutiple input single output (MISO) systems, where the energy splitting (ES) mode is considered for the STAR-RIS. We aim to design the active beamforming vectors at the base station (BS) and the passive beamforming at the STAR-RIS to maximize the user sum rate under transmitting power constraints. The formulated problem is non-convex and nontrivial to obtain the global optimum due to the coupling between active beamforming vectors and STAR-RIS phase shifts. To efficiently solve the problem, we propose a novel graph neural network (GNN)-based framework. Specifically, we first model the interactions among users and network entities using a heterogeneous graph representation. A heterogeneous graph neural network (HGNN) implementation is then introduced to directly optimizes beamforming vectors and STAR-RIS coefficients with the system objective. Numerical results show that the proposed approach yields efficient performance compared to the previous benchmarks. Furthermore, the proposed GNN is scalable with various system configurations.

We propose reflection pattern modulation-aided reconfigurable intelligent surface (RPM-RIS)-assisted cell-free massive multiple-input-multiple-output (CF-mMIMO) schemes for green uplink transmission. In our RPM-RIS-assisted CF-mMIMO system, extra information is conveyed by the indices of the active RIS blocks, exploiting the joint benefits of both RIS-assisted CF-mMIMO transmission and RPM. Since only part of the RIS blocks are active, our proposed architecture strikes a flexible energy vs. spectral efficiency (SE) trade-off. We commence with introducing the system model by considering spatially correlated channels. Moreover, we conceive a channel estimation scheme subject to the linear minimum mean-square error (MMSE) constraint, yielding sufficient information for the subsequent signal processing steps. Then, upon exploiting a so-called large-scale fading decoding (LSFD) scheme, the uplink signal-to-interference-and-noise ratio (SINR) is derived based on the RIS ON/OFF statistics, where both maximum ratio (MR) and local minimum mean-square error (L-MMSE) combiners are considered. By invoking the MR combiner, the closed-form expression of the uplink SE is formulated based only on the channel statistics. Furthermore, we derive the total energy efficiency (EE) of our proposed RPM-RIS-assisted CF-mMIMO system. Additionally, we propose a chaotic sequence-based adaptive particle swarm optimization (CSA-PSO) algorithm to maximize the total EE by designing the RIS phase shifts. Specifically, the initial particle diversity is promoted by invoking chaotic sequences, and an adaptive time-varying inertia weight is developed to improve its particle search performance. Furthermore, the particle mutation and reset steps are appropriately selected to enable the algorithm to escape from local optima. Finally, our simulation results demonstrate that the proposed RPM-RIS-assisted CF-mMIMO architecture strikes an attractive SE vs. EE trade-off, while the CSA-PSO algorithm is capable of attaining a significant EE performance gain compared to conventional solutions.

Jointly optimizing power allocation and device association is crucial in Internet-of-Things (IoT) networks to ensure devices achieve their data throughput requirements. Device association, which assigns IoT devices to specific access points (APs), critically impacts resource allocation. Many existing works often assume all data throughput requirements are satisfied, which is impractical given resource limitations and diverse demands. When requirements cannot be met, the system becomes infeasible, causing congestion and degraded performance. To address this problem, we propose a novel framework to enhance IoT system robustness by solving two problems, comprising maximizing the number of satisfied IoT devices and jointly maximizing both the number of satisfied devices and total network throughput. These objectives often conflict under infeasible circumstances, necessitating a careful balance. We thus propose a modified branch-and-bound (BB)-based method to solve the first problem. An iterative algorithm is proposed for the second problem that gradually increases the number of satisfied IoT devices and improves the total network throughput. We employ a logarithmic approximation for a lower bound on data throughput and design a fixed-point algorithm for power allocation, followed by a coalition game-based method for device association. Numerical results demonstrate the efficiency of the proposed algorithm, serving fewer devices than the BB-based method but with faster running time and higher total throughput.

This paper considers fairness designs under the user-centric framework with heterogeneous receivers comprising access points (APs) and a satellite. We exploit the closed-form ergodic throughput per user to formulate a generic optimization class that addresses the network fairness subject to the association patterns of all the users. Exhibiting the combinatorial structure, the global optimal solution to the association patterns can be obtained by an exhaustive search for small-scale networks with a small number of APs and users. For large-scale networks, we design two low computational complexity algorithms based on evolutionary computation to obtain a good solution in polynomial time. Specifically, we adapt the genetic algorithm (GA) to handle the discrete feasible region and the fairness metrics. Numerical results demonstrate that the optimized association patterns significantly improve the per-user throughput. The proposed GA-based algorithms yield the global optimum for small-scale networks coincided with an exhaustive search. Besides, the GA-based algorithms unveil practical association patterns for large-scale networks.

Both space and ground communications have been proven effective solutions under different perspectives in Internet of Things (IoT) networks. This article investigates multiple-access scenarios, where plenty of IoT users are cooperatively served by a satellite in space and access points (APs) on the ground. Available users in each coherence interval are split into scheduled and unscheduled subsets to optimize limited radio resources. We compute the uplink ergodic throughput of each scheduled user under imperfect channel state information (CSI) and nonorthogonal pilot signals. As maximum-radio combining is deployed locally at the ground gateway and the APs, the uplink ergodic throughput is obtained in a closed-form expression. The analytical results explicitly unveil the effects of channel conditions and pilot contamination on each scheduled user. By maximizing the sum throughput, the system can simultaneously determine scheduled users and perform power allocation based on either a model-based approach with alternating optimization or a learning-based approach with the graph neural network. Numerical results manifest that integrated satellite-terrestrial cell-free massive multiple-input-multiple-output systems can significantly improve the sum ergodic throughput over coherence intervals. The integrated systems can schedule the vast majority of users; some might be out of service due to the limited power budget.

Sixth-generation (6G) networks pose substantial security risks because confidential information is transmitted over wireless channels with a broadcast nature, and various attack vectors emerge. Physical layer security (PLS) exploits the dynamic characteristics of wireless environments to provide secure communications, while reconfigurable intelligent surfaces (RISs) can facilitate PLS by controlling wireless transmissions. With RIS-aided PLS, a lightweight security solution can be designed for low-end Internet of Things (IoT) devices, depending on the design scenario and communication objective. This article discusses RIS-aided PLS designs for 6G-IoT networks against eavesdropping and jamming attacks. The theoretical background and literature review of RIS-aided PLS are discussed, and design solutions related to resource allocation, beamforming, artificial noise, and cooperative communication are presented. We provide simulation results to show the effectiveness of RIS in terms of PLS. In addition, we examine the research issues and possible solutions for RIS modeling, channel modeling and estimation, optimization, and machine learning. Finally, we discuss recent advances, including simultaneous transmitting and reflecting-RIS and malicious RIS.

The Internet of Things (IoT) and massive IoT systems are key to sixth-generation (6G) networks due to dense connectivity, ultra-reliability, low latency, and high throughput. Artificial intelligence, including deep learning and machine learning, offers solutions for optimizing and deploying cutting-edge technologies for future radio communications. However, these techniques are vulnerable to adversarial attacks, leading to degraded performance and erroneous predictions, outcomes unacceptable for ubiquitous networks. This survey extensively addresses adversarial attacks and defense methods in 6G network-assisted IoT systems. The theoretical background and up-to-date research on adversarial attacks and defenses are discussed. Furthermore, we provide Monte Carlo simulations to validate the effectiveness of adversarial attacks compared to jamming attacks. Additionally, we examine the vulnerability of 6G IoT systems by demonstrating attack strategies applicable to key technologies, including reconfigurable intelligent surfaces, massive multiple-input multiple-output (MIMO)/cell-free massive MIMO, satellites, the metaverse, and semantic communications. Finally, we outline the challenges and future developments associated with adversarial attacks and defenses in 6G IoT systems.

In this study, we investigate the trade-off between reliability and security in unmanned aerial vehicle (UAV) communications systems, considering a UAV-terrestrial network aided by a relay powered by a dedicated power beacon. For this system, we derive the outage probability (OP) under both exact and approximate frameworks and compute the approximations in the closed-form expressions. For the security aspect, we also derive the intercept probability (IP) under exact and approximated frameworks. To minimize the IP, a friendly jamming technique is employed whereby the power beacon constantly broadcasts artificial noise (AN) toward an eavesdropper. Based on the derived mathematical framework, we then formulate a bi-objective optimization problem by jointly minimizing the OP and IP with respect to the UAV’s position and the time-switching (TS) ratio. A suitable algorithm, named non-dominated sorting genetic algorithm version II (NSGA-II), is deployed to obtain the sub-optimal solution. Finally, numerical results are presented to verify the accuracy of the proposed mathematical framework and the superiority of jointly minimizing both the OP and IP using only the channel statistics.

Reconfigurable intelligent surface (RIS) has recently gained significant interest as an emerging technology for future wireless networks thanks to its potential for improving the coverage in challenging propagation environments. This paper studies an RIS-assisted communication system, where a source transmits data to a destination in the presence of a weak direct link. We analyze and compare RIS designs based on long-term and short-term channel statistics in terms of coverage probability and ergodic rate. For the considered optimization designs, we derive closed-form expressions for the coverage probability and ergodic rate, which explicitly unveil the impact of the propagation environment and the RIS on the system performance. Besides the optimization of the RIS phase profile, we formulate an RIS placement optimization problem with the aim of maximizing the coverage probability by relying only on partial channel state information. An efficient algorithm is proposed based on the gradient ascent method. Simulation results are illustrated in order to corroborate the analytical framework and findings. The proposed RIS phase profile is shown to outperform several heuristic benchmark schemes in terms of outage probability and ergodic rate. In addition, the proposed RIS placement strategy provides an extra degree of freedom that remarkably improves the system performance.

This research exploits the applications of reconfigurable intelligent surface (RIS)-assisted multiple input multiple output (MIMO) systems, specifically addressing the enhancement of communication reliability with modulated signals. Specifically, we first derive the analytical downlink symbol error rate (SER) of each user as a multivariate function of both the phase-shift and beamforming vectors. The analytical SER enables us to obtain insights into the synergistic dynamics between the RIS and MIMO communication. We then introduce a novel average SER minimization problem subject to the practical constraints of the transmitted power budget and phase shift coefficients, which is NP-hard. By incorporating the differential evolution (DE) algorithm as a pivotal tool for optimizing the intricate active and passive beamforming variables in RIS-assisted communication systems, the non-convexity of the considered SER optimization problem can be effectively handled. Furthermore, an efficient local search is incorporated into the DE algorithm to overcome the local optimum, and hence offer low SER and high communication reliability. Monte Carlo simulations validate the analytical results and the proposed optimization framework, indicating that the joint active and passive beamforming design is superior to the other benchmarks.

This paper studies multiple-access scenarios where users are cooperatively served by the satellite and terrestrial access points (APs). We derive the uplink ergodic throughput of scheduled users under practical conditions where maximum-radio combining is exploited locally at the ground gateway and the APs. The analytical result explicitly unveils the effects of pilot contamination and channel conditions on the achievable throughput of each scheduled user in the uplink data transmission. The system can explicitly define the scheduled users and perform the power allocation by maximizing the sum throughput using either model-based or learning-based approaches. Numerical results demonstrate that the cooperation between space and ground systems brings superior throughput improvements over either space or ground networks. Even though most users can be simultaneously served, some may not be scheduled in each coherence interval due to limited radio resources.

This paper investigates double RIS-assisted MIMO communication systems over Rician fading channels with practical propagation conditions. Firstly, we derive the statistical channel information in closed form, which reveals the various influences of the system and the environment. Next, we study the active and passive beamforming designs for enhancing communication reliability. In particular, we propose a novel end-to-end design, where each 1-dimensional convolutional neural network (1D-CNN) represents a system entity that minimizes the symbol error rate by controlling the transceiver and RISs' phase shifts. Numerical results validate our analysis and demonstrate the superior improvements of phase shift designs to boost system performance. It is demonstrated that the proposed design can encode multiple data symbols simultaneously over different channel realizations and improve the SER performance without requiring channel information at the transmitter.

Direction sensor networks are robust systems employed for detecting phenomena in environments or monitoring objects therein. They have a wide range of applications across many different industries and fields. In terms of the availability of resources, direction sensor networks deal with two problems: over-provision and under-provision of sensors. Over-provision occurs when there are too many sensors in the monitoring area, resulting in wasted resources and unnecessary energy consumption as some sensors are not well utilized. In contrast, under-provision occurs when there are too few sensors in the monitoring area, leading to the coverage of targets not satisfied. To ensure balanced coverage in under-provisioned environments, sensors must be placed so as to provide nearly equal fault tolerance to all objects, thereby enhancing the operational efficiency of the network. On the other hand, in over-provisioned environments, the number of active sensors needs to be minimized so that energy consumption is efficient. This study focuses on solving the Q-coverage problem in adjustable-orientation direction sensor networks, aiming to optimize a bi-level objective: maximizing network coverage balancing while minimizing sensor count in both under-provisioned and over-provisioned environments. The proposed Improved Genetic Algorithm utilizes novel operators, including Greedily-tuned Simulated Binary Crossover and Adaptive Polynomial Mutation. Evaluation parameters, including the Q-Balancing Index, Distance Index, Coverage Quality, Power Consumption, and the number of active sensors, demonstrate the efficiency of the proposed algorithm compared to other existing methods.

A whole suite of innovative technologies and architectures have emerged in response to the rapid growth of wireless traffic. This paper studies an integrated network design that boosts system capacity through cooperation between wireless access points (APs) and a satellite for enhancing the network’s spectral efficiency.As for our analytical contributions, upon coherently combing the signals received by the central processing unit (CPU) from the users through the space and terrestrial links, we first mathematically derive an achievable throughput expression for the uplink (UL) data transmission over spatially correlated Rician channels. Our generic achievable throughput expression is applicable for arbitrary received signal detection techniques employed at the APs and the satellite under realistic imperfect channel estimates. A closed-form expression is then obtained for the ergodic UL data throughput, when maximum ratio combining is utilized for detecting the desired signals.As for our resource allocation contributions, we formulate the max-min fairness and total transmit power optimization problems relying on the channel statistics for performing power allocation. The solution of each optimization problem is derived in form of a low-complexity iterative design, in which each data power variable is updated relying on a closed-form expression. Our integrated hybrid network concept allows users to be served that may not otherwise be accommodated due to the excessive data demands. The algorithms proposed allow us to address the congestion issues appearing when at least one user is served at a rate below his/her target. The mathematical analysis is also illustrated with the aid of our numerical results that show the added benefits of considering the space links in terms of improving the ergodic data throughput. Furthermore, the proposed algorithms smoothly circumvent any potential congestion, especially in face of high rate requirements and weak channel conditions.

This paper investigates double RIS-assisted MIMO communication systems over Rician fading channels with finite scatterers, spatial correlation, and the existence of a double-scattering link between the transceiver. First, the statistical information is driven in closed form for the aggregated channels, unveiling various influences of the system and environment on the average channel power gains. Next, we study two active and passive beamforming designs corresponding to two objectives. The first problem maximizes channel capacity by jointly optimizing the active precoding and combining matrices at the transceivers and passive beamforming at the double RISs subject to the transmitting power constraint. In order to tackle the inherently non-convex issue, we propose an efficient alternating optimization algorithm (AO) based on the alternating direction method of multipliers (ADMM). The second problem enhances communication reliability by jointly training the encoder and decoder at the transceivers and the phase shifters at the RISs. Each neural network representing a system entity in an end-to-end learning framework is proposed to minimize the symbol error rate of the detected symbols by controlling the transceiver and the RISs’ phase shifts. Numerical results verify our analysis and demonstrate the superior improvements of phase shift designs to boost system performance.

This paper studies an integrated network design that boosts system capacity through cooperation between wireless access points (APs) and a satellite. By coherently combing the signals received by the central processing unit from the users through the space and terrestrial links, we mathematically derive an achievable throughput expression for the uplink (UL) data transmission over spatially correlated Rician channels. A closed-form expression is obtained when maximum ratio combining is employed to detect the desired signals. We formulate the max-min fairness and total transmit power optimization problems relying on the channel statistics to perform power allocation. The solution of each optimization problem is derived in form of a low-complexity iterative design, in which each data power variable is updated based on a closed-form expression. The mathematical analysis is validated with numerical results showing the added benefits of considering a satellite link in terms of improving the ergodic data throughput.

Reconfigurable intelligent surfaces (RISs) have recently gained significant interest as an emerging technology for future wireless networks. This paper studies an RIS-assisted propagation environment, where a single-antenna source transmits data to a single-antenna destination in the presence of a weak direct link. We analyze and compare RIS designs based on long-term and short-term channel statistics in terms of coverage probability and ergodic rate. For the considered optimization designs, closed-form expressions for the coverage probability and ergodic rate are derived. We use numerical simulations to validate the obtained analytical framework. Also, we show that the considered optimal phase shift designs outperform several heuristic benchmarks.

This paper considers reconfigurable intelligent surface (RIS)-assisted point-to-point multiple-input multiple-output (MIMO) communication systems, where a transmitter communicates with a receiver through an RIS. Based on the main target of reducing the bit error rate (BER) and therefore enhancing the communication reliability, we study different model-based and data-driven (autoencoder) approaches. In particular, we consider a model-based approach that optimizes both active and passive optimization variables. We further propose a novel end-to-end data-driven framework, which leverages the recent advances in machine learning. The neural networks presented for conventional signal processing modules are jointly trained with the channel effects to minimize the bit error detection. Numerical results demonstrate that the proposed data-driven approach can learn to encode the transmitted signal via different channel realizations dynamically. In addition, the data-driven approach not only offers a significant gain in the BER performance compared to the other state-of-the-art benchmarks but also guarantees the performance when perfect channel information is unavailable.

Very High Throughput Satellite (VHTS) systems are characterized by a multi-beam footprint covering wide areas and providing service to large numbers of users. Multicasting comes naturally to exploit the multiuser diversity in VHTS systems, where the data of different users are multiplexed in a single PHY frame. Following the DVB-S2(X) standard, the resulting PHY frame is encoded using a single codeword. The latter brings some practical implementation challenges when precoding is considered, as the precoder can no longer be designed on a user-by-user basis. Avoiding overambitious and impractical precoding designs, our work focuses on the low-complexity MMSE-based precoding, which has been considered as the baseline for early satellite over-the-air precoding tests. While the multicast scheduling has been widely investigated in the literature, we will show in this work that its performance is significantly impacted by the equivalent multicast channel calculation. Therefore, in this paper, we analyze and report the impact of the user scheduling (i.e., selection of users to be multiplexed together in a single PHY frame) as well as the methodology employed for the equivalent multicast channel considered for the precoding computation.

Radio-frequency (RF) energy harvesting (EH) in wireless relaying networks has attracted considerable recent interest, especially for supplying energy to relay nodes in the Internet of Things (IoT) systems to assist the information exchange between a source and a destination. Moreover, limited hardware, computational resources, and energy availability of IoT devices have raised various security challenges. To this end, physical-layer security (PLS) has been proposed as an effective alternative to cryptographic methods for providing information security. In this study, we propose a PLS approach for simultaneous wireless information and power transfer (SWIPT)-based half-duplex (HD) amplify-and-forward (AF) relaying systems in the presence of an eavesdropper. Furthermore, we take into account both static power splitting relaying (SPSR) and dynamic power splitting relaying (DPSR) to thoroughly investigate the benefits of each one. To further enhance secure communication, we consider multiple friendly jammers to help prevent wiretapping attacks from the eavesdropper. More specifically, we provide a reliability and security analysis by deriving closed-form expressions of outage probability (OP) and intercept probability (IP), respectively, for both the SPSR and DPSR schemes. Then, simulations are also performed to validate our analysis and the effectiveness of the proposed schemes. Specifically, numerical results illustrate the nontrivial tradeoff between reliability and security of the proposed system. In addition, we conclude from the simulation results that the proposed DPSR scheme outperforms the SPSR-based scheme in terms of OP and IP under the influences of different parameters on system performance.

High-throughput satellite communication systems are growing in strategic importance thanks to their role in delivering broadband services to mobile platforms and residences and/or businesses in rural and remote regions globally. Although precoding has emerged as a prominent technique to meet ever-increasing user demands, there is a lack of studies dealing with congestion control. This paper enhances the performance of multi-beam high throughput geostationary satellite systems under congestion, where the users’ quality of service (QoS) demands cannot be fully satisfied with limited resources. In particular, we propose congestion control strategies, relying on simple power control schemes. We formulate a multi-objective optimization framework balancing the system sum-rate and the number of users satisfying their QoS requirements. Next, we propose two novel approaches that effectively handle the proposed multi-objective optimization problem. The former is a model-based approach that relies on the weighted sum method to enrich the number of satisfied users by solving a series of the sum-rate optimization problems in an iterative manner. The latter is a data-driven approach that offers a low-cost solution by utilizing supervised learning and exploiting the optimization structures as continuous mappings. The proposed general framework is evaluated for different linear precoding techniques, for which the low computational complexity algorithms are designed. Numerical results manifest that our proposed framework effectively handles the congestion issue and brings superior improvements of rate satisfaction to many users than previous works. Furthermore, the proposed algorithms show low run-time and make them realistic for practical systems.

We study downlink channel estimation in a multi-cell Massive multiple-input multiple-output (MIMO) system operating in time-division duplex. The users must know their effective channel gains to decode their received downlink data. Previous works have used the mean value as the estimate, motivated by channel hardening. However, this is associated with a performance loss in non-isotropic scattering environments. We propose two novel estimation methods that can be applied without downlink pilots. The first method is model-based and asymptotic arguments are utilized to identify a connection between the effective channel gain and the average received power during a coherence interval. The second method is data-driven and trains a neural network to identify a mapping between the available information and the effective channel gain. Both methods can be utilized for any channel distribution and precoding. For the model-aided method, we derive all expressions in closed form for the case when maximum ratio or zero-forcing precoding is used. We compare the proposed methods with the state-of-the-art using the normalized mean-squared error and spectral efficiency (SE). The results suggest that the two proposed methods provide better SE than the state-of-the-art when there is a low level of channel hardening, while the performance difference is relatively small with the uncorrelated channel model.

We consider an aeronautical ad-hoc network relying on aeroplanes operating in the presence of a spoofer. The aggregated signal received by the terrestrial base station is considered as “clean” or “normal”, if the legitimate aeroplanes transmit their signals and there is no spoofing attack. By contrast, the received signal is considered as “spurious” or “abnormal” in the face of a spoofing signal. An autoencoder (AE) is trained to learn the characteristics/features from a training dataset, which contains only normal samples associated with no spoofing attacks. The AE takes original samples as its input samples and reconstructs them at its output. Based on the trained AE, we define the detection thresholds of our spoofing discovery algorithm. To be more specific, contrasting the output of the AE against its input will provide us with a measure of geometric waveform similarity/dissimilarity in terms of the peaks of curves. To quantify the similarity betweenunknowntesting samples and thegiventraining samples (including normal samples), we first propose a so-calleddeviation-based algorithm. Furthermore, we estimate the angle of arrival (AoA) from each legitimate aeroplane and propose a so-calledAoA-based algorithm. Then based on a sophisticated amalgamation of these two algorithms, we form our final detection algorithm for distinguishing the spurious abnormal samples from normal samples under a strict testing condition. In conclusion, our numerical results show that the AE improves the trade-off between the correct spoofing detection rate and the false alarm rate as long as the detection thresholds are carefully selected.

Massive multiple-input multiple-output (MIMO) is a key technology for improving the spectral and energy efficiency in 5G-and-beyond wireless networks. For a tractable analysis, most of the previous works on Massive MIMO have been focused on the system performance with complex Gaussian channel impulse responses under rich-scattering environments. In contrast, this paper investigates the uplink ergodic spectral efficiency (SE) of each user under the double scattering channel model. We derive a closed-form expression of the uplink ergodic SE by exploiting the maximum ratio (MR) combining technique based on imperfect channel state information. We further study the asymptotic SE behaviors as a function of the number of antennas at each base station (BS) and the number of scatterers available at each radio channel. We then formulate and solve a total energy optimization problem for the uplink data transmission that aims at simultaneously satisfying the required SEs from all the users with limited data power resource. Notably, our proposed algorithms can cope with the congestion issue appearing when at least one user is served by lower SE than requested. Numerical results illustrate the effectiveness of the closed-form ergodic SE over Monte-Carlo simulations. Besides, the system can still provide the required SEs to many users even under congestion.

Cell-Free Massive multiple-input multiple-output (MIMO) and reconfigurable intelligent surface (RIS) are two promising technologies for application to beyond-5G networks. This paper considers Cell-Free Massive MIMO systems with the assistance of an RIS for enhancing the system performance under the presence of spatial correlation among the engineered scattering elements of the RIS. Distributed maximum-ratio processing is considered at the access points (APs). We introduce anaggregated channelestimation approach that provides sufficient information for data processing with the main benefit of reducing the overhead required for channel estimation. The considered system is studied by using asymptotic analysis which lets the number of APs and/or the number of RIS elements grow large. A lower bound for the channel capacity is obtained for a finite number of APs and engineered scattering elements of the RIS, and closed-form expressions for the uplink and downlink ergodic net throughput are formulated in terms of only the channel statistics. Based on the obtained analytical frameworks, we unveil the impact of channel correlation, the number of RIS elements, and the pilot contamination on the net throughput of each user. In addition, a simple control scheme for optimizing the configuration of the engineered scattering elements of the RIS is proposed, which is shown to increase the channel estimation quality, and, hence, the system performance. Numerical results demonstrate the effectiveness of the proposed system design and performance analysis. In particular, the performance benefits of using RISs in Cell-Free Massive MIMO systems are confirmed, especially if the direct links between the APs and the users are of insufficient quality with high probability.

This paper considers Cell-Free Massive Multiple Input Multiple Output (MIMO) systems with the assistance of an RIS for enhancing the system performance. Distributed maximum-ratio combining (MRC) is considered at the access points (APs). We introduce an aggregated channel estimation method that provides sufficient information for data processing. The considered system is studied by using asymptotic analysis which lets the number of APs and/or the number of RIS elements grow large. A lower bound for the channel capacity is obtained for a finite number of APs and engineered scattering elements of the RIS, and closed-form expression for the uplink ergodic net throughput is formulated. In addition, a simple scheme for controlling the configuration of the RIS scattering elements is proposed. Numerical results verify the effectiveness of the proposed system design and the benefits of using RISs in Cell-Free Massive MIMO systems are quantified.

This paper considers a massive MIMO system under the double scattering channels. We derive a closed-form expression of the uplink ergodic spectral efficiency (SE) by exploiting the maximum-ratio combining technique with imperfect channel state information. We then formulate and solve a total uplink data power optimization problem that aims at simultaneously satisfying the required SEs from all the users with limited power resources. We further propose algorithms to cope with the congestion issue appearing when at least one user is served by lower SE than requested. Numerical results illustrate the effectiveness of our proposed power optimization. More importantly, our proposed congestion-handling algorithms can guarantee the required SEs to many users under congestion, even when the SE requirement is high.

A large-scale distributed antenna system that serves the users by coherent joint transmission is called Cell-free Massive MIMO (multiple input multiple output). For a given user set, only a subset of the access points (APs) is likely needed to satisfy the users' performance demands. To find a flexible and energy-efficient implementation, we minimize the total power consumption at the APs in the downlink, considering both the hardware and transmit powers, where APs can be turned off. Even though this is a non-convex optimization problem, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. We also propose a low-complexity algorithm that exploits group-sparsity in the problem formulation. Numerical results manifest that our optimization framework can greatly reduce the power consumption compared to keeping all APs turned on and only minimizing the transmit powers.

Large-scale distributed antenna systems with many access points (APs) that serve the users by coherent joint transmission is being considered for 5G-and-beyond networks. The technology is called Cell-free Massive MIMO and can provide a more uniform service level to the users than a conventional cellular topology. For a given user set, only a subset of the APs is likely needed to satisfy the users' performance demands, particularly outside the peak traffic hours. To find achieve an energy-efficient load balancing, we minimize the total downlink power consumption at the APs, considering both the transmit powers and hardware dissipation. APs can be temporarily turned off to reduce the latter part. The formulated optimization problem is non-convex but, nevertheless, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. Since the computational complexity is prohibitive for real-time implementation, we also propose two low-complexity algorithms that exploit the inherent group-sparsity and the optimized transmit powers in the problem formulation. Numerical results manifest that our optimization algorithms can greatly reduce the power consumption compared to keeping all APs turned on and only minimizing the transmit powers. Moreover, the low-complexity algorithms can effectively handle the power allocation and AP activation for large-scale networks.

This paper considers the sum spectral efficiency (SE) optimization problem in multi-cell Massive MIMO systems with a varying number of active users. This is formulated as a joint pilot and data power control problem. Since the problem is non-convex, we first derive a novel iterative algorithm that obtains a stationary point in polynomial time. To enable real-time implementation, we also develop a deep learning solution. The proposed neural network, PowerNet, only uses the large-scale fading information to predict both the pilot and data powers. The main novelty is that we exploit the problem structure to design a single neural network that can handle a dynamically varying number of active users; hence, PowerNet is simultaneously approximating many different power control functions with varying number inputs and outputs. This is not the case in prior works and thus makes PowerNet an important step towards a practically useful solution. Numerical results demonstrate that PowerNet only loses 2% in sum SE, compared to the iterative algorithm, in a nine-cell system with up to 90 active users per in each coherence interval, and the runtime was only 0.03 ms on a graphics processing unit (GPU). When good data labels are selected for the training phase, PowerNet can yield better sum SE than by solving the optimization problem with one initial point.

This paper investigates the joint data and pilot power optimization for maximum sum spectral efficiency (SE) in multi-cell Massive MIMO systems, which is a non-convex problem. We first propose a new optimization algorithm, inspired by the weighted minimum mean square error (MMSE) approach, to obtain a stationary point in polynomial time. We then use this algorithm together with deep learning to train a convolutional neural network to perform the joint data and pilot power control in sub-millisecond runtime, making it suitable for online optimization in real multi-cell Massive MIMO systems. The numerical result demonstrates that the solution obtained by the neural network is 1% less than the stationary point for four-cell systems, while the sum SE loss is 2% in a nine-cell system.

This paper studies a two-layer decoding method that mitigates inter-cell interference in multi-cell Massive MIMO systems. In layer one, each base station (BS) estimates the channels to intra-cell users and uses the estimates for local decoding on each BS, followed by a second decoding layer where the BSs cooperate to mitigate inter-cell interference. An uplink achievable spectral efficiency (SE) expression is computed for arbitrary two-layer decoding schemes, while a closed-form expression is obtained for correlated Rayleigh fading channels, maximum-ratio combining (MRC), and large-scale fading decoding (LSFD) in the second layer. We formulate a non-convex sum SE maximization problem with both the data power and LSFD vectors as optimization variables and develop an algorithm based on the weighted MMSE (minimum mean square error) approach to obtain a stationary point with low computational complexity.

Massive multiple-input-multiple-output (MIMO) systems can suffer from coherent intercell interference due to the phenomenon of pilot contamination. This paper investigates a two-layer decoding method that mitigates both coherent and non-coherent interference in multi-cell Massive MIMO. To this end, each base station (BS) first estimates the channels to intra-cell users using either minimum mean-squared error (MMSE) or element-wise MMSE estimation based on uplink pilots. The estimates are used for local decoding on each BS followed by a second decoding layer where the BSs cooperate to mitigate inter-cell interference. An uplink achievable spectral efficiency (SE) expression is computed for arbitrary two-layer decoding schemes. A closed form expression is then obtained for correlated Rayleigh fading, maximum-ratio combining, and the proposed large-scale fading decoding (LSFD) in the second layer. We also formulate a sum SE maximization problem with both the data power and LSFD vectors as optimization variables. Since this is an NP-hard problem, we develop a low-complexity algorithm based on the weighted MMSE approach to obtain a local optimum. The numerical results show that both data power control and LSFD improve the sum SE performance over single-layer decoding multi-cell Massive MIMO systems.

This paper considers pilot design to mitigate pilot contamination and provide good service for everyone in multi-cell massive multiple-input-multiple-output systems. Instead of modeling the pilot design as a combinatorial assignment problem, as in prior works, we express the pilot signals using a pilot basis and treat the associated power coefficients as continuous optimization variables. We compute a lower bound on the uplink capacity for Rayleigh fading channels with maximum ratio detection that applies with arbitrary pilot signals. We further formulate the max-min fairness problem under power budget constraints, with the pilot signals and data powers as optimization variables. Because this optimization problem is non-deterministic polynomial-time hard due to signomial constraints, we then propose an algorithm to obtain a local optimum with polynomial complexity. Our framework serves as a benchmark for pilot design in scenarios with either ideal or non-ideal hardware. Numerical results manifest that the proposed optimization algorithms are close to the optimal solution obtained by exhaustive search for different pilot assignments and the new pilot structure and optimization bring large gains over the state-of-the-art suboptimal pilot design.

This paper optimizes the pilot assignment and pilot transmit powers to mitigate pilot contamination in Massive MIMO (multiple-input multiple-output) systems. While prior works have treated pilot assignment as a combinatorial problem, we achieve a more tractable problem formulation by directly optimizing the pilot sequences. To this end, we compute a lower bound on the uplink (UL) spectral efficiency (SE), for Rayleigh fading channels with maximum ratio (MR) detection and arbitrary pilot sequences. We optimize the max-min SE with respect to the pilot sequences and pilot powers, under power budget constraints. This becomes an NP-hard signomial problem, but we propose an efficient algorithm to obtain a local optimum with polynomial complexity. Numerical results manifest the near optimality of the proposed algorithm and show significant gains over existing suboptimal algorithms.

This paper aims to minimize the total transmit power consumption for Massive MIMO (multiple-input multiple-output) downlink cellular systems when each user is served by the optimized subset of the base stations (BSs). We derive a lower bound on the ergodic spectral efficiency (SE) for Rayleigh fading channels and maximum ratio transmission (MRT) when the BSs cooperate using non-coherent joint transmission. We solve the joint user association and downlink transmit power minimization problem optimally under fixed SE constraints. Furthermore, we solve a max-min fairness problem with user specific weights that maximizes the worst SE among the users. The optimal BS-user association rule is derived, which is different from maximum signal-to-noise-ratio (max-SNR) association. Simulation results manifest that the proposed methods can provide good SE for the users using less transmit power than in small-scale systems and that the optimal user association can effectively balance the load between BSs when needed.

This paper investigates the joint power allocation and user association problem in multi-cell Massive MIMO (multiple-input multiple-output) downlink (DL) systems. The target is to minimize the total transmit power consumption when each user is served by an optimized subset of the base stations (BSs), using non-coherent joint transmission. We first derive a lower bound on the ergodic spectral efficiency (SE), which is applicable for any channel distribution and precoding scheme. Closed-form expressions are obtained for Rayleigh fading channels with either maximum ratio transmission (MRT) or zero forcing (ZF) precoding. From these bounds, we further formulate the DL power minimization problems with fixed SE constraints for the users. These problems are proved to be solvable as linear programs, giving the optimal power allocation and BS-user association with low complexity. Furthermore, we formulate a max-min fairness problem that maximizes the worst SE among the users, and we show that it can be solved as a quasi-linear program. Simulations manifest that the proposed methods provide good SE for the users using less transmit power than in small-scale systems and the optimal user association can effectively balance the load between BSs when needed. Even though our framework allows the joint transmission from multiple BSs, there is an overwhelming probability that only one BS is associated with each user at the optimal solution.

Block-based compressive sensing is attractive for sensing natural images and video because it makes large-sized image/video tractable. However, its reconstruction performance is yet to be improved much. This paper proposes a new block-based compressive video sensing recovery scheme which can reconstruct video sequences with high quality. It generates initial key frames by incorporating the augmented Lagrangian total variation with a nonlocal means filter which is well known for being good at preserving edges and reducing noise. Additionally, local principal component analysis (PCA) transform is employed to enhance the detailed information. The non-key frames are initially predicted by their measurements and reconstructed key frames. Furthermore, regularization with PCA transform-aided side information iteratively seeks better reconstructed solution. Simulation results manifest effectiveness of the proposed scheme.