Recent research shows that integrating artificial intelligence (AI) into wireless communication systems can significantly improve spectral efficiency. However, most AI-based receiver studies rely on simulated radio channel data for both training and validation, raising concerns about real-world generalization, which is vital for ensuring reliable field performance. In this study, we train DeepRx, a convolutional neural network (CNN)-based OFDM receiver, under various simulated channel scenarios and validate its performance over- the-air (OTA) using software-defined radio (SDR) technology in a small cell-type setup. To enhance receiver training, we investigate a randomized 3GPP TS38.901 channel model to diversify the training data, thereby improving performance over conventional receivers and matching or exceeding the performance of receivers trained on narrowly targeted channel models. These results demonstrate DeepRx's robust generalization capability and suggest that narrowly scoped, individual TS38.901 models can compromise both training and validation, underscoring the need for tailored channel models, careful training strategies, and OTA testing in learned receiver development.

Machine learning algorithms have recently been considered for many tasks in the field of wireless communications. Previously, we have proposed the use of a deep fully convolutional neural network (CNN) for receiver processing and shown it to provide considerable performance gains. In this study, we focus on machine learning algorithms for the transmitter. In particular, we consider beamforming and propose a CNN which, for a given uplink channel estimate as input, outputs downlink channel information to be used for beamforming. The CNN is trained in a supervised manner considering both uplink and downlink transmissions with a loss function that is based on UE receiver performance. The main task of the neural network is to predict the channel evolution between uplink and downlink slots, but it can also learn to handle inefficiencies and errors in the whole chain, including the actual beamforming phase. The provided numerical experiments demonstrate the improved beamforming performance.

In this article, we propose multiple machine learning (ML) based physical-layer receiver solutions for demodulating orthogonal frequency-division multiplexing (OFDM) signals that are subject to high level of nonlinear distortion. Specifically, three novel deep learning based convolutional neural network receivers are devised, containing layers in time- and/or frequency-domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Applicable training procedures are also described, such that the learned layers in the receiver processing properly generalize over different nonlinear distortion and multipath channel characteristics. Extensive set of numerical results is provided, in the context of 5G NR uplink (UL) incorporating also measured terminal power amplifier (PA) characteristics. The obtained results show that the proposed receiver systems are able to clearly outperform the classical linear minimum mean-squared error (LMMSE) receiver as well as the existing ML receiver approaches, especially when the EVM is high compared to modulation order. This is particularly so when the devised ML receiver is of hybrid nature with layers both in time and frequency. The proposed ML receivers can thus facilitate pushing the terminal PA systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage. Through combining the obtained radio link performance results with link budget calculations, all carried out at the 28 GHz mmWave band, it is shown that the proposed ML receivers can enhance the network coverage in terms of maximum UL link distances by close to 100%, when compared to classical LMMSE receiver based networks.

Recently, deep learning has been proposed as a potential technique for improving the physical layer performance of radio receivers. Despite the large amount of encouraging results, most works have not considered spatial multiplexing in the context of multiple-input and multiple-output (MIMO) receivers. In this paper, we present a deep learning-based MIMO receiver architecture that consists of a ResNet-based convolutional neural network, also known as DeepRx, combined with a so-called transformation layer, all trained together. We propose two novel alternatives for the transformation layer: a maximal ratio combining-based transformation, or a fully learned transformation. The former relies more on expert knowledge, while the latter utilizes learned multiplicative layers. Both proposed transformation layers are shown to clearly outperform the conventional baseline receiver, especially with sparse pilot configurations. To the best of our knowledge, these are some of the first results showing such high performance for a fully learned MIMO receiver.

In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Extensive set of numerical results is provided, in the context of 5G NR uplink incorporating also measured terminal power amplifier characteristics. The obtained results show that the proposed receiver system is able to clearly outperform classical linear receivers as well as existing ML receiver approaches, especially when the EVM is high in comparison with modulation order. The proposed ML receiver can thus facilitate pushing the terminal power amplifier (PA) systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage.

Deep learning has solved many problems that are out of reach of heuristic algorithms. It has also been successfully applied in wireless communications, even though the current radio systems are well-understood and optimal algorithms exist for many tasks. While some gains have been obtained by learning individual parts of a receiver, a better approach is to jointly learn the whole receiver. This, however, often results in a challenging nonlinear problem, for which the optimal solution is infeasible to implement. To this end, we propose a deep fully convolutional neural network, DeepRx, which executes the whole receiver pipeline from frequency domain signal stream to uncoded bits in a 5G-compliant fashion. We facilitate accurate channel estimation by constructing the input of the convolutional neural network in a very specific manner using both the data and pilot symbols. Also, DeepRx outputs soft bits that are compatible with the channel coding used in 5G systems. Using 3GPP-defined channel models, we demonstrate that DeepRx outperforms traditional methods. We also show that the high performance can likely be attributed to DeepRx learning to utilize the known constellation points of the unknown data symbols, together with the local symbol distribution, for improved detection accuracy.

Recent developments in cardiovascular modelling allow us to simulate blood flow in an entire human body. Such model can also be used to create databases of virtual subjects, with sizes limited only by computational resources. In this work, we study if it is possible to estimate cardiovascular health indices using machine learning approaches. In particular, we carry out theoretical assessment of estimating aortic pulse wave velocity, diastolic and systolic blood pressure and stroke volume using pulse transit/arrival timings derived from photopletyshmography signals. For predictions, we train Gaussian process regression using a database of virtual subjects generated with a cardiovascular simulator. Simulated results provides theoretical assessment of accuracy for predictions of the health indices. For instance, aortic pulse wave velocity can be estimated with a high accuracy (r > 0.9) when photopletyshmography is measured from left carotid artery using a combination of foot-to-foot pulse transmit time and peak location derived for the predictions. Similar accuracy can be reached for diastolic blood pressure, but predictions of systolic blood pressure are less accurate (r > 0.75) and the stroke volume predictions are mostly contributed by heart rate.