Demonstration venue · read-only. Every page can be browsed; the buttons that would change it are switched off. Create an account to run TaxoReview on your own data. A simulation from public publication records: the people listed were not invited and did not agree to review.
? Tutorial for this page

René M. G. Wijnhoven

dblp:178/9255 · DBLP profile ↗
← Back
1ranked-venue papers
1as first author
0since 2021 · last 1968
—ORCID · none

Domains — the database's venue-derived domains; a paper can count in several

Systems, architecture and hardware · 1 · 1 first-author

Expertise — from the expertise taxonomy: the topics of the expert's papers under the CCF categories. A weight counts papers with recency: 1 for a paper about the topic, 0.3 when the topic is its context, halved every five years.

Computer architecture, parallel and distributed computing, and storage systems
1 paper
Memory systems · 67% Interconnection networks and networks-on-chip · 33%

Topics — the 3 heaviest of 3, each with the papers that count most for it

TopicWeightPapersLastEvidence papers
Interconnection networks and networks-on-chip › switch architecture
crossbar switch
0.011968
A Simple High-Speed Magnetic Access Switch Matrix · IEEE Trans. Computers 1968
Memory systems
magnetic memory
0.011968
A Simple High-Speed Magnetic Access Switch Matrix · IEEE Trans. Computers 1968
Memory systems
memory access
0.011968
A Simple High-Speed Magnetic Access Switch Matrix · IEEE Trans. Computers 1968

Methods — techniques the papers use, named apart from their topics

permanent magnet bias · 0.0permalloy needle design · 0.0
YearPublicationVenuePosition
1968 A Simple High-Speed Magnetic Access Switch Matrix
abstract
Abstract—An improved switch core principle is described which can be applied to a pulsewidth as short as 50 ns. The factors usually limiting switch core performance, such as pulse distortion due to low field strength, heat, and noise are eliminated by the use of long, thin permalloy needles. These needles can easily be provided with coils with a large number of turns and thus high field strengths can be applied. Because of its improved cooling properties and the fact that a permanent magnet bias can be used, the heat problem is greatly reduced . Finally, the permalloy material has such extremely good saturation properties that the noise figures are reduced in spite of the higher speed.
René M. G. Wijnhoven
IEEE Trans. Computers1