Wearable devices, which are small electronic devices worn on a human body, are equipped with low level of processing and storage capacities and offer some types of integrated functionalities. Recently, wearable device is becoming increasingly popular, various kinds of wearable device are launched in the market; however, wearable devices require a powerful local-hub, most are smartphone, to replenish processing and storage capacities for advanced functionalities. Sometime it may be inconvenient to carry the local-hub (smartphone); thus, many wearable devices are equipped with Wi-Fi interface, enabling them to exchange data with local-hub though the Internet when the local-hub is not nearby. However, this results in long response time and restricted functionalities. In this paper, we present a virtual local-hub solution, which utilizes network equipment nearby (e.g., Wi-Fi APs) as the local-hub. Since migrating all applications serving the wearable devices respectively takes too much networking and storage resources, the proposed solution deploys function modules to multiple network nodes and enables remote function module sharing among different users and applications. To reduce the impact of the solution on the network bandwidth, we propose a heuristic algorithm for function module allocation with the objective of minimizing total bandwidth consumption. We conduct series of experiments, and the results show that the proposed solution can reduce the bandwidth consumption by up to half and still serve all requests given a large number of service requests.

To efficiently support and manage massive number of Internet of Things (IoT) short and bursty sessions, current long-term evolution (LTE) system needs to reduce signal load generated by IoT session setup/synchronization, while balancing the system performance, such as UE power consumption and delays to time-sensitive traffic. In LTE, radio resource control (RRC) and discontinuous reception (DRX) affect power consumption, signal load, and delay. We provide a session management methodology suitable for IoT traffic over LTE. Our analysis starts with a Markov chain analysis of the impact of DRX parameters. This is followed by an optimal uplink scheduler design and an IoT-aware adaptive DRX algorithm at the client, both of which modulate the tradeoff among signal load, delay, and power consumption. Scalability is also considered by providing a high-priority clustering-based adaptive DRX algorithm at eNB. Simulation results show that for packets with 0.1 s delay, our scheduler outperforms “Tx now” (and “Wait Till Deadline”) by 50% (and 30%) in power saving and by 60% (and 15%) in signal saving. With knowledge of the traffic pattern, IoT-aware adaptive DRX can further reduce signal load by 25%, especially for delay-sensitive traffic.