Three‐dimensional (3D) local feature detection and description techniques are widely used for object registration and recognition applications. Although several evaluations of 3D local feature detection and description methods have already been published, these are constrained in a single dimensional scheme, i.e. either 3D or 2D methods that are applied onto multiple projections of the 3D data. However, cross‐dimensional (mixed 2D and 3D) feature detection and description are yet to be investigated. Here, the authors evaluated the performance of both single and cross‐dimensional feature detection and description methods on several 3D data sets and demonstrated the superiority of cross‐dimensional over single‐dimensional schemes.

The 3-D automatic target recognition (ATR) has many advantages over its 2-D counterpart, but there are several constraints in the context of small low-cost unmanned aerial vehicles (UAVs). These limitations include the requirement for active rather than passive monitoring, high equipment costs, sensor packaging size, and processing burden. We, therefore, propose a new structure from motion (SfM) 3-D ATR architecture that exploits the UAV's onboard sensors, i.e., the visual band camera, gyroscope, and accelerometer, and meets the requirements of a small UAV system. We tested the proposed 3-D SfM ATR using simulated UAV reconnaissance scenarios and found that the performance was better than classic 3-D light detection and ranging (LIDAR) ATR, combining the advantages of 3-D LIDAR ATR and passive 2-D ATR. The main advantages of the proposed architecture include the rapid processing, target pose invariance, small template size, passive scene sensing, and inexpensive equipment. We implemented the SfM module under two keypoint detection, description and matching schemes, with the 3-D ATR module exploiting several current techniques. By comparing SfM 3-D ATR, 3-D LIDAR ATR, and 2-D ATR, we confirmed the superior performance of our new architecture.

3D object recognition is proven superior compared to its 2D counterpart with numerous implementations, making it a current research topic. Local based proposals specifically, although being quite accurate, they limit their performance on the stability of their local reference frame or axis (LRF/A) on which the descriptors are defined. Additionally, extra processing time is demanded to estimate the LRF for each local patch. We propose a 3D descriptor which overrides the necessity of a LRF/A reducing dramatically processing time needed. In addition robustness to high levels of noise and non-uniform subsampling is achieved. Our approach, namely Histogram of Distances is based on multiple L2-norm metrics of local patches providing a simple and fast to compute descriptor suitable for time-critical applications. Evaluation on both high and low quality popular point clouds showed its promising performance.