Recently, 3D Gaussian Splatting (3DGS) has enabled photorealistic view synthesis at high inference speeds. However, its splatting-based rendering model makes several approximations to the rendering equation, reducing physical accuracy. We show that the core approximations in splatting are unnecessary, even within a rasterizer; we instead volumetrically integrate 3D Gaussians directly to compute the transmittance across them analytically. We use this analytic transmittance to derive more physically-accurate alpha values than 3DGS, which can directly be used within their framework. The result is a method that more closely follows the volume rendering equation (similar to ray-tracing) while enjoying the speed benefits of rasterization. Our method represents opaque surfaces with higher accuracy and fewer points than 3DGS. This enables it to outperform 3DGS for view synthesis (measured in SSIM and LPIPS). Being volumetrically consistent also enables our method to work out of the box for tomography. We match the state-of-the-art 3DGS-based tomography method with fewer points. Our code is publicly available at: https://github.com/chinmay0301ucsd/Vol3DGS

End-to-end optimization, which simultaneously optimizes optics and algorithms, has emerged as a powerful data-driven method for computational imaging system design. This method achieves joint optimization through backpropagation by incorporating differentiable optics simulators to generate measurements and algorithms to extract information from measurements. However, due to high computational costs, it is challenging to model both aberration and diffraction in light transport for end-to-end optimization of compound optics. Therefore, most existing methods compromise physical accuracy by neglecting wave optics effects or off-axis aberrations, which raises concerns about the robustness of the resulting designs. In this paper, we propose a differentiable optics simulator that efficiently models both aberration and diffraction for compound optics. Using the simulator, we conduct end-to-end optimization on scene reconstruction and classification. Experimental results demonstrate that both lenses and algorithms adopt different configurations depending on whether wave optics is modeled. We also show that systems optimized without wave optics suffer from performance degradation when wave optics effects are introduced during testing. These findings underscore the importance of accurate wave optics modeling in optimizing imaging systems for robust, high-performance applications.

Compressive video capture encodes a short high-speed video into a single measurement using a low-speed sensor, then computationally reconstructs the original video. Prior implementations rely on expensive hardware and are restricted to imaging sparse scenes with empty backgrounds. We propose RnGCam, a system that fuses measurements from low-speed consumer-grade rolling-shutter (RS) and global-shutter (GS) sensors into video at kHz frame rates. The RS sensor is combined with a pseudorandom optic, called a diffuser, which spatially multiplexes scene information. The GS sensor is coupled with a conventional lens. The RS-diffuser provides low spatial detail and high temporal detail, complementing the GS-lens system's high spatial detail and low temporal detail. We propose a reconstruction method using implicit neural representations (INR) to fuse the measurements into a high-speed video. Our INR method separately models the static and dynamic scene components, while explicitly regularizing dynamics. In simulation, we show that our approach significantly outperforms previous RS compressive video methods, as well as state-of-the-art frame interpolators. We validate our approach in a dual-camera hardware setup, which generates 230 frames of video at 4,800 frames per second for dense scenes, using hardware that costs $10 \times$ less than previous compressive video systems.

Recent monocular metric depth estimation (MMDE) methods have made notable progress towards zero-shot generalization. However, they still exhibit a significant performance drop on out-of-distribution datasets. We address this limitation by injecting defocus blur cues at inference time into Marigold, a \textit{pre-trained} diffusion model for zero-shot, scale-invariant monocular depth estimation (MDE). Our method effectively turns Marigold into a metric depth predictor in a training-free manner. To incorporate defocus cues, we capture two images with a small and a large aperture from the same viewpoint. To recover metric depth, we then optimize the metric depth scaling parameters and the noise latents of Marigold at inference time using gradients from a loss function based on the defocus-blur image formation model. We compare our method against existing state-of-the-art zero-shot MMDE methods on a self-collected real dataset, showing quantitative and qualitative improvements.

High-dynamic-range (HDR) imaging is an essential technique for overcoming the dynamic range limits of image sensors. The classic method relies on multiple exposures, which slows capture time, resulting in motion artifacts when imaging dynamic scenes. Single-shot HDR imaging alleviates this issue by encoding HDR data in a single exposure, then computationally recovering it. Many established methods use strong image priors to recover improperly exposed detail; these approaches struggle with extended highlight regions. In this work, we demonstrate a novel single-shot HDR capture method that utilizes the global reset release (GRR) shutter mode commonly found in off-the-shelf sensors. GRR shutter mode applies a longer exposure time to rows closer to the bottom of the sensor. We use optics that relay a randomly permuted (shuffled) image onto the sensor, effectively creating spatially randomized exposures across the scene. The resulting exposure diversity allows us to recover HDR data by solving an optimization problem with a simple total variation image prior. In simulation, we demonstrate that our method outperforms other single-shot methods when many sensor pixels are saturated (10% or more), and is competitive at modest saturation (1%). Finally, we demonstrate a physical lab prototype that uses an off-the-shelf random fiber bundle for the optical shuffling. The fiber bundle is coupled to a low-cost commercial sensor operating in GRR shutter mode. Our prototype achieves a dynamic range of up to 73dB using an 8-bit sensor with 48dB dynamic range.

Because image sensor chips have a finite bandwidth with which to read out pixels, recording video typically requires a trade-off between frame rate and pixel count. Compressed sensing techniques can circumvent this trade-off by assuming that the image is compressible. Here, we propose using multiplexing optics to spatially compress the scene, enabling information about the whole scene to be sampled from a row of sensor pixels, which can be read off quickly via a rolling shutter CMOS sensor. Conveniently, such multiplexing can be achieved with a simple lensless, diffuser-based imaging system. Using sparse recovery methods, we are able to recover 140 video frames at over 4,500 frames per second, all from a single captured image with a rolling shutter sensor. Our proof-of-concept system uses easily-fabricated diffusers paired with an off-the-shelf sensor. The resulting prototype enables compressive encoding of high frame rate video into a single rolling shutter exposure, and exceeds the sampling-limited performance of an equivalent global shutter system for sufficiently sparse objects.

We capture 4D light field data in a single 2D sensor image by encoding spatio-angular information into a speckle field (causticpattern) through a phase diffuser. Using wave-optics theory and a coherent phase retrieval method, we calibrate the system by measuring the diffuser surface height from through-focus images. Wave-optics theory further informs the design of system geometry such that a purely additive ray-optics model is valid. Light field reconstruction is done using nonlinear matrix inversion methods, including ℓ1 minimization. We demonstrate a prototype system and present empirical results of 4D light field reconstruction and computational refocusing from a single diffuser-encoded 2D image.