Genome sequencing has become a central focus in computational biology due to its critical role in applications such as personalized medicine, disease outbreak tracking, and evolutionary research. A genome study typically begins with sequencing, which produces millions to billions of short DNA fragments known as reads. Extracting meaningful biological insights from these reads requires a computationally intensive step called read mapping, where each read is aligned to a reference genome. Read mapping for short reads comes in two forms: single-end and paired-end, with the latter being more prevalent due to its higher accuracy and support for advanced analysis. Read mapping remains a major performance bottleneck in genome analysis as a result of the extensive use of computationally intensive dynamic programming. Prior efforts have attempted to mitigate this cost by employing filters to identify and potentially discard computationally expensive matches and leveraging hardware accelerators to speed up the computations. While partially effective, these approaches have limitations. In particular, existing filters are often ineffective for paired-end reads, as they evaluate each read independently and exhibit relatively low filtering ratios. In this work, we propose GenPairX, a hardware-algorithm codesigned accelerator that efficiently minimizes the computational load of paired-end read mapping while enhancing the throughput of memory-intensive operations. GenPairX introduces: (1) a novel filtering algorithm that jointly considers both reads in a pair to improve filtering effectiveness, and a lightweight alignment algorithm to replace most of the computationally expensive dynamic programming operations, and (2) two specialized hardware mechanisms to support the proposed algorithms. The proposed hardware addresses the high memory bandwidth demands of the read filtering process via orchestration of memory accesses over high-bandwidth memory channels, and accelerates the alignment of candidate reads via simple vectorized logical XOR operators. Our evaluations show that GenPairX delivers substantial performance improvements over state-of-the-art solutions, achieving$1575 \times$and$1.43 \times$higher throughput per watt compared to leading CPU-based and accelerator-based read mappers, respectively, all without compromising accuracy.

Genome sequence analysis, which examines the DNA sequences of organisms, drives advances in many critical medical and biotechnological fields. Given its importance and the exponentially growing volumes of genomic sequence data, there are extensive efforts to accelerate genome sequence analysis. In this work, we demonstrate a major bottleneck that greatly limits and diminishes the benefits of state-of-the-art genome sequence analysis accelerators: the data preparation bottleneck, where genomic sequence data is stored in compressed form and needs to be first decompressed and formatted before an accelerator can operate on it. To mitigate this bottleneck, we propose SAGe, an algorithm-architecture co-design for highly-compressed storage and high-performance a ccess of large-scale genomic sequence data. The key challenge is to improve data preparation performance while maintaining high compression ratios (comparable to genomic-specific compression algorithms) at low hardware cost. We address this challenge by leveraging key properties of genomic datasets to co-design (i) a lossless (de)compression algorithm, (ii) hardware that decompresses data with lightweight operations and efficient streaming accesses, (iii) storage data layout, and (iv) interface commands to access data. SAGe is highly versatile, as it supports datasets from different sequencing technologies and species. Due to its lightweight design, SAGe can be seamlessly integrated with a broad range of hardware accelerators for genome sequence analysis to mitigate their data preparation bottlenecks. Our results demonstrate that SAGe improves the average end-to-end performance and energy efficiency of two state-of-the-art genome sequence analysis accelerators by 3.0×-32.1× and 13.0×-34.0×, respectively, compared to when the accelerators rely on state-of-the-art software and hardware decompression tools.

MOTIVATION: Raw nanopore signal analysis is a common approach in genomics to provide fast and resource-efficient analysis without translating the signals to bases (i.e. without basecalling). However, existing solutions cannot interpret raw signals directly if a reference genome is unknown due to a lack of accurate mechanisms to handle increased noise in pairwise raw signal comparison. Our goal is to enable the direct analysis of raw signals without a reference genome. To this end, we propose Rawsamble, the first mechanism that can identify regions of similarity between all raw signal pairs, known as all-vs-all overlapping, using a hash-based search mechanism. RESULTS: We use these overlaps to construct de novo assembly graphs with an existing assembler, miniasm, off-the-shelf. To our knowledge, these are the first de novo assemblies ever constructed directly from raw signals without basecalling. Our extensive evaluations across multiple genomes of varying sizes show that Rawsamble provides a significant speedup (on average by 5.01× and up to 23.10×) and reduces peak memory usage (on average by 5.74× and up to by 22.00×) compared to a conventional genome assembly pipeline using the state-of-the-art tools for basecalling (Dorado's fastest mode) and overlapping (minimap2) on a CPU. We find that around one-third of Rawsamble's overlapping pairs are also found by minimap2. We find that when we use overlapping reads from Rawsamble, we can construct unitigs that are (i) as accurate as those built from minimap2's overlaps and (ii) up to half a chromosome in length (e.g. 2.3 million bases for E. coli). AVAILABILITY AND IMPLEMENTATION: Rawsamble is available at https://github.com/CMU-SAFARI/RawHash. We also provide the scripts to fully reproduce our results on our GitHub page.

AirLift is the first read remapping tool that enables users to quickly and comprehensively map a read set, that had been previously mapped to one reference genome, to another similar reference. Users can then quickly run a downstream analysis of read sets for each latest reference release. Compared to the state-of-the-art method for remapping reads (i.e., full mapping), AirLift reduces the overall execution time to remap read sets between two reference genome versions by up to 27.4×. We validate our remapping results with GATK and find that AirLift provides high accuracy in identifying ground truth SNP/INDEL variants.

Conventional genome analysis relies on translating the noisy raw electrical signals generated by DNA sequencing technologies into nucleotide bases (i.e., A, C, G, and T) through a computationally-intensive process called basecalling.Raw signal genome analysis (RSGA) has emerged as a promising approach towards enabling real-time genome analysis by directly analyzing raw electrical signals without the need for basecalling.However, rapid advancements in sequencing technologies make it increasingly difficult for softwarebased RSGA to match the throughput of raw signal generation.Hardware-based RSGA acceleration has the potential to bridge the gap between software-based RSGA and sequencing throughput.

Metagenomics, the study of the genome sequences of diverse organisms in a common environment, has led to significant advances in many fields. Since the species present in a metagenomic sample are not known in advance, metagenomic analysis commonly involves the key tasks of determining the species present in a sample and their relative abundances. These tasks require searching large metagenomic databases containing information on different species’ genomes. Metagenomic analysis suffers from significant data movement overhead due to moving large amounts of low-reuse data from the storage system to the rest of the system. In-storage processing can be a fundamental solution for reducing this overhead. However, designing an in-storage processing system for metagenomics is challenging because existing approaches to metagenomic analysis cannot be directly implemented in storage effectively due to the hardware limitations of modern SSDs.We propose MegIS, the first in-storage processing system designed to significantly reduce the data movement overhead of the end-to-end metagenomic analysis pipeline. MegIS is enabled by our lightweight design that effectively leverages and orchestrates processing inside and outside the storage system. Through our detailed analysis of the end-to-end metagenomic analysis pipeline and careful hardware/software co-design, we address in-storage processing challenges for metagenomics via specialized and efficient 1) task partitioning, 2) data/computation flow coordination, 3) storage technology-aware algorithmic optimizations, 4) data mapping, and 5) lightweight in-storage accelerators. MegIS’s design is flexible, capable of supporting different types of metagenomic input datasets, and can be integrated into various metagenomic analysis pipelines. Our evaluation shows that MegIS outperforms the state-of-the-art performance- and accuracy-optimized software metagenomic tools by 2.7× – 37.2× and 6.9×–100.2×, respectively, while matching the accuracy of the accuracy-optimized tool. MegIS achieves 1.5×–5.1× speedup compared to the state-of-the-art metagenomic hardware-accelerated (using processing-in-memory) tool, while achieving significantly higher accuracy.

SUMMARY: Raw nanopore signals can be analyzed while they are being generated, a process known as real-time analysis. Real-time analysis of raw signals is essential to utilize the unique features that nanopore sequencing provides, enabling the early stopping of the sequencing of a read or the entire sequencing run based on the analysis. The state-of-the-art mechanism, RawHash, offers the first hash-based efficient and accurate similarity identification between raw signals and a reference genome by quickly matching their hash values. In this work, we introduce RawHash2, which provides major improvements over RawHash, including more sensitive quantization and chaining algorithms, weighted mapping decisions, frequency filters to reduce ambiguous seed hits, minimizers for hash-based sketching, and support for the R10.4 flow cell version and POD5 and SLOW5 file formats. Compared to RawHash, RawHash2 provides better F1 accuracy (on average by 10.57% and up to 20.25%) and better throughput (on average by 4.0× and up to 9.9×) than RawHash. AVAILABILITY AND IMPLEMENTATION: RawHash2 is available at https://github.com/CMU-SAFARI/RawHash. We also provide the scripts to fully reproduce our results on our GitHub page.

Profile hidden Markov models (pHMMs) are widely employed in various bioinformatics applications to identify similarities between biological sequences, such as DNA or protein sequences. In pHMMs, sequences are represented as graph structures, where states and edges capture modifications (i.e., insertions, deletions, and substitutions) by assigning probabilities to them. These probabilities are subsequently used to compute the similarity score between a sequence and a pHMM graph. The Baum-Welch algorithm, a prevalent and highly accurate method, utilizes these probabilities to optimize and compute similarity scores. Accurate computation of these probabilities is essential for the correct identification of sequence similarities. However, the Baum-Welch algorithm is computationally intensive, and existing solutions offer either software-only or hardware-only approaches with fixed pHMM designs. When we analyze state-of-the-art works, we identify an urgent need for a flexible, high-performance, and energy-efficient hardware-software co-design to address the major inefficiencies in the Baum-Welch algorithm for pHMMs. We introduce ApHMM , the first flexible acceleration framework designed to significantly reduce both computational and energy overheads associated with the Baum-Welch algorithm for pHMMs. ApHMM employs hardware-software co-design to tackle the major inefficiencies in the Baum-Welch algorithm by (1) designing flexible hardware to accommodate various pHMM designs, (2) exploiting predictable data dependency patterns through on-chip memory with memoization techniques, (3) rapidly filtering out unnecessary computations using a hardware-based filter, and (4) minimizing redundant computations. ApHMM achieves substantial speedups of 15.55×–260.03×, 1.83×–5.34×, and 27.97× when compared to CPU, GPU, and FPGA implementations of the Baum-Welch algorithm, respectively. ApHMM outperforms state-of-the-art CPU implementations in three key bioinformatics applications: (1) error correction, (2) protein family search, and (3) multiple sequence alignment, by 1.29×–59.94×, 1.03×–1.75×, and 1.03×–1.95×, respectively, while improving their energy efficiency by 64.24×–115.46×, 1.75×, and 1.96×.

High-throughput sequencing (HTS) technologies have revolutionized the field of genomics, enabling rapid and cost-effective genome analysis for various applications. However, the increasing volume of genomic data generated by HTS technologies presents significant challenges for computational techniques to effectively analyze genomes. To address these challenges, several algorithm-architecture co-design works have been proposed, targeting different steps of the genome analysis pipeline. These works explore emerging technologies to provide fast, accurate, and low-power genome analysis.This paper provides a brief review of the recent advancements in accelerating genome analysis, covering the opportunities and challenges associated with the acceleration of the key steps of the genome analysis pipeline. Our analysis highlights the importance of integrating multiple steps of genome analysis using suitable architectures to unlock significant performance improvements and reduce data movement and energy consumption. We conclude by emphasizing the need for novel strategies and techniques to address the growing demands of genomic data generation and analysis.

Conventional virtual memory (VM) frameworks enable a virtual address to flexibly map to any physical address. This flexibility necessitates large data structures to store virtual-to-physical mappings, which leads to high address translation latency and large translation-induced interference in the memory hierarchy, especially in data-intensive workloads. On the other hand, restricting the address mapping so that a virtual address can only map to a specific set of physical addresses can significantly reduce address translation overheads by making use of compact and efficient translation structures. However, restricting the address mapping flexibility across the entire main memory severely limits data sharing across different processes and increases data accesses to the swap space of the storage device even in the presence of free memory.

Basecalling, an essential step in many genome analysis studies, relies on large Deep Neural Network s (DNN s) to achieve high accuracy. Unfortunately, these DNN s are computationally slow and inefficient, leading to considerable delays and resource constraints in the sequence analysis process. A Computation-In-Memory (CIM) architecture using memristors can significantly accelerate the performance of DNN s. However, inherent device non-idealities and architectural limitations of such designs can greatly degrade the basecalling accuracy, which is critical for accurate genome analysis. To facilitate the adoption of memristor-based CIM designs for basecalling, it is important to (1) conduct a comprehensive analysis of potential CIM architectures and (2) develop effective strategies for mitigating the possible adverse effects of inherent device non-idealities and architectural limitations.

Nanopore sequencers generate electrical raw signals in real-time while sequencing long genomic strands. These raw signals can be analyzed as they are generated, providing an opportunity for real-time genome analysis. An important feature of nanopore sequencing, Read Until, can eject strands from sequencers without fully sequencing them, which provides opportunities to computationally reduce the sequencing time and cost. However, existing works utilizing Read Until either (i) require powerful computational resources that may not be available for portable sequencers or (ii) lack scalability for large genomes, rendering them inaccurate or ineffective. We propose RawHash, the first mechanism that can accurately and efficiently perform real-time analysis of nanopore raw signals for large genomes using a hash-based similarity search. To enable this, RawHash ensures the signals corresponding to the same DNA content lead to the same hash value, regardless of the slight variations in these signals. RawHash achieves an accurate hash-based similarity search via an effective quantization of the raw signals such that signals corresponding to the same DNA content have the same quantized value and, subsequently, the same hash value. We evaluate RawHash on three applications: (i) read mapping, (ii) relative abundance estimation, and (iii) contamination analysis. Our evaluations show that RawHash is the only tool that can provide high accuracy and high throughput for analyzing large genomes in real-time. When compared to the state-of-the-art techniques, UNCALLED and Sigmap, RawHash provides (i) 25.8× and 3.4× better average throughput and (ii) significantly better accuracy for large genomes, respectively. Source code is available at https://github.com/CMU-SAFARI/RawHash.

Read mapping is a fundamental step in many genomics applications. It is used to identify potential matches and differences between fragments (called reads) of a sequenced genome and an already known genome (called a reference genome). Read mapping is costly because it needs to perform approximate string matching (ASM) on large amounts of data. To address the computational challenges in genome analysis, many prior works propose various approaches such as accurate filters that select the reads within a dataset of genomic reads (called a read set) that must undergo expensive computation, efficient heuristics, and hardware acceleration. While effective at reducing the amount of expensive computation, all such approaches still require the costly movement of a large amount of data from storage to the rest of the system, which can significantly lower the end-to-end performance of read mapping in conventional and emerging genomics systems.

A critical step of genome sequence analysis is the mapping of sequenced DNA fragments (i.e., reads) collected from an individual to a known linear reference genome sequence (i.e., sequence-to-sequence mapping). Recent works replace the linear reference sequence with a graph-based representation of the reference genome, which captures the genetic variations and diversity across many individuals in a population. Mapping reads to the graph-based reference genome (i.e., sequence-to-graph mapping) results in notable quality improvements in genome analysis. Unfortunately, while sequence-to-sequence mapping is well studied with many available tools and accelerators, sequence-to-graph mapping is a more difficult computational problem, with a much smaller number of practical software tools currently available.

Nanopore sequencing is a widely-used high-throughput genome sequencing technology that can sequence long fragments of a genome into raw electrical signals at low cost. Nanopore sequencing requires two computationally-costly processing steps for accurate downstream genome analysis. The first step, basecalling, translates the raw electrical signals into nucleotide bases (i.e., A, C, G, T). The second step, read mapping, finds the correct location of a read in a reference genome. In existing genome analysis pipelines, basecalling and read mapping are executed separately. We observe in this work that such separate execution of the two most time-consuming steps inherently leads to ❨1❩ significant data movement and ❨2❩ redundant computations on the data, slowing down the genome analysis pipeline. This paper proposes GenPIP, an in-memory genome analysis accelerator that tightly integrates basecalling and read mapping. GenPIP improves the petformance of the genome analysis pipeline with two key mechanisms: ❨1❩ in-memory fine-grained collaborative execution of the major genome analysis steps in parallel}; ❨2❩ a new technique for early-rejection of low-quality and unmapped reads to timely stop the execution of genome analysis for such reads, reducing inefficient computation. Our experiments show that, for the execution of the genome analysis pipeline, GenPIP provides 41.6$\times$ (8.4$\times$) speedup and 32.8$\times$ (20.8$\times$) energy savings with negligible accuracy loss compared to the state-of-the-art software genome analysis tools executed on a state-of-the-art CPU (GPU). Compared to a design that combines state-of-the-art in-memory basecalling and read mapping accelerators, GenPIP provides 1.39$\times$ speedup and 1.37$\times$ energy savings.

MOTIVATION: A genome read dataset can be quickly and efficiently remapped from one reference to another similar reference (e.g., between two reference versions or two similar species) using a variety of tools, e.g., the commonly used CrossMap tool. With the explosion of available genomic datasets and references, high-performance remapping tools will be even more important for keeping up with the computational demands of genome assembly and analysis. RESULTS: We provide FastRemap, a fast and efficient tool for remapping reads between genome assemblies. FastRemap provides up to a 7.82× speedup (6.47×, on average) and uses as low as 61.7% (80.7%, on average) of the peak memory consumption compared to the state-of-the-art remapping tool, CrossMap. AVAILABILITY AND IMPLEMENTATION: FastRemap is written in C++. Source code and user manual are freely available at: github.com/CMU-SAFARI/FastRemap. Docker image available at: https://hub.docker.com/r/alkanlab/fastremap. Also available in Bioconda at: https://anaconda.org/bioconda/fastremap-bio.

Genome sequence analysis has enabled significant advancements in medical and scientific areas such as personalized medicine, outbreak tracing, and the understanding of evolution. To perform genome sequencing, devices extract small random fragments of an organism's DNA sequence (known as reads). The first step of genome sequence analysis is a computational process known as read mapping. In read mapping, each fragment is matched to its potential location in the reference genome with the goal of identifying the original location of each read in the genome. Unfortunately, rapid genome sequencing is currently bottlenecked by the computational power and memory bandwidth limitations of existing systems, as many of the steps in genome sequence analysis must process a large amount of data. A major contributor to this bottleneck is approximate string matching (ASM), which is used at multiple points during the mapping process. ASM enables read mapping to account for sequencing errors and genetic variations in the reads. We propose GenASM, the first ASM acceleration framework for genome sequence analysis. GenASM performs bitvectorbased ASM, which can efficiently accelerate multiple steps of genome sequence analysis. We modify the underlying ASM algorithm (Bitap) to significantly increase its parallelism and reduce its memory footprint. Using this modified algorithm, we design the first hardware accelerator for Bitap. Our hardware accelerator consists of specialized systolic-array-based compute units and on-chip SRAMs that are designed to match the rate of computation with memory capacity and bandwidth, resulting in an efficient design whose performance scales linearly as we increase the number of compute units working in parallel. We demonstrate that GenASM provides significant performance and power benefits for three different use cases in genome sequence analysis. First, GenASM accelerates read alignment for both long reads and short reads. For long reads, GenASM outperforms state-of-the-art software and hardware accelerators by 116× and 3.9×, respectively, while reducing power consumption by 37× and 2.7×. For short reads, GenASM outperforms state-of-the-art software and hardware accelerators by 111× and 1.9×. Second, GenASM accelerates pre-alignment filtering for short reads, with 3.7× the performance of a state-of-the-art pre-alignment filter, while reducing power consumption by 1.7× and significantly improving the filtering accuracy. Third, GenASM accelerates edit distance calculation, with 22-12501× and 9.3-400× speedups over the state-of-the-art software library and FPGA-based accelerator, respectively, while reducing power consumption by 548-582× and 67×. We conclude that GenASM is a flexible, high-performance, and low-power framework, and we briefly discuss four other use cases that can benefit from GenASM.

MOTIVATION: Third-generation sequencing technologies can sequence long reads that contain as many as 2 million base pairs. These long reads are used to construct an assembly (i.e. the subject's genome), which is further used in downstream genome analysis. Unfortunately, third-generation sequencing technologies have high sequencing error rates and a large proportion of base pairs in these long reads is incorrectly identified. These errors propagate to the assembly and affect the accuracy of genome analysis. Assembly polishing algorithms minimize such error propagation by polishing or fixing errors in the assembly by using information from alignments between reads and the assembly (i.e. read-to-assembly alignment information). However, current assembly polishing algorithms can only polish an assembly using reads from either a certain sequencing technology or a small assembly. Such technology-dependency and assembly-size dependency require researchers to (i) run multiple polishing algorithms and (ii) use small chunks of a large genome to use all available readsets and polish large genomes, respectively. RESULTS: We introduce Apollo, a universal assembly polishing algorithm that scales well to polish an assembly of any size (i.e. both large and small genomes) using reads from all sequencing technologies (i.e. second- and third-generation). Our goal is to provide a single algorithm that uses read sets from all available sequencing technologies to improve the accuracy of assembly polishing and that can polish large genomes. Apollo (i) models an assembly as a profile hidden Markov model (pHMM), (ii) uses read-to-assembly alignment to train the pHMM with the Forward-Backward algorithm and (iii) decodes the trained model with the Viterbi algorithm to produce a polished assembly. Our experiments with real readsets demonstrate that Apollo is the only algorithm that (i) uses reads from any sequencing technology within a single run and (ii) scales well to polish large assemblies without splitting the assembly into multiple parts. AVAILABILITY AND IMPLEMENTATION: Source code is available at https://github.com/CMU-SAFARI/Apollo. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

MOTIVATION: Genomic studies identify genomic loci representing genetic variations, transcription factor (TF) occupancy, or histone modification through next generation sequencing (NGS) technologies. Interpreting these loci requires evaluating them with known genomic and epigenomic annotations. RESULTS: We present GLANET as a comprehensive annotation and enrichment analysis tool which implements a sampling-based enrichment test that accounts for GC content and/or mappability biases, jointly or separately. GLANET annotates and performs enrichment analysis on these loci with a rich library. We introduce and perform novel data-driven computational experiments for assessing the power and Type-I error of its enrichment procedure which show that GLANET has attained high statistical power and well-controlled Type-I error rate. As a key feature, users can easily extend its library with new gene sets and genomic intervals. Other key features include assessment of impact of single nucleotide variants (SNPs) on TF binding sites and regulation based pathway enrichment analysis. AVAILABILITY AND IMPLEMENTATION: GLANET can be run using its GUI or on command line. GLANET's source code is available at https://github.com/burcakotlu/GLANET . Tutorials are provided at https://glanet.readthedocs.org . CONTACT: [email protected] or [email protected]. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

RESULTS: Here, we present a comprehensive analysis on the reproducibility of computational characterization of genomic variants using high throughput sequencing data. We reanalyzed the same datasets twice, using the same tools with the same parameters, where we only altered the order of reads in the input (i.e. FASTQ file). Reshuffling caused the reads from repetitive regions being mapped to different locations in the second alignment, and we observed similar results when we only applied a scatter/gather approach for read mapping-without prior shuffling. Our results show that, some of the most common variation discovery algorithms do not handle the ambiguous read mappings accurately when random locations are selected. In addition, we also observed that even when the exact same alignment is used, the GATK HaplotypeCaller generates slightly different call sets, which we pinpoint to the variant filtration step. We conclude that, algorithms at each step of genomic variation discovery and characterization need to treat ambiguous mappings in a deterministic fashion to ensure full replication of results. AVAILABILITY AND IMPLEMENTATION: Code, scripts and the generated VCF files are available at DOI:10.5281/zenodo.32611. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.