While data filter caches (DFCs) have been shown to be effective at reducing data access energy, they have not been adopted in processors due to the associated performance penalty caused by high DFC miss rates. In this article, we present a design that both decreases the DFC miss rate and completely eliminates the DFC performance penalty even for a level-one data cache (L1 DC) with a single cycle access time. First, we show that a DFC that lazily fills each word in a DFC line from an L1 DC only when the word is referenced is more energy-efficient than eagerly filling the entire DFC line. For a 512B DFC, we are able to eliminate loads of words into the DFC that are never referenced before being evicted, which occurred for about 75% of the words in 32B lines. Second, we demonstrate that a lazily word filled DFC line can effectively share and pack data words from multiple L1 DC lines to lower the DFC miss rate. For a 512B DFC, we completely avoid accessing the L1 DC for loads about 23% of the time and avoid a fully associative L1 DC access for loads 50% of the time, where the DFC only requires about 2.5% of the size of the L1 DC. Finally, we present a method that completely eliminates the DFC performance penalty by speculatively performing DFC tag checks early and only accessing DFC data when a hit is guaranteed. For a 512B DFC, we improve data access energy usage for the DTLB and L1 DC by 33% with no performance degradation.

Level-one data cache (L1 DC) and data translation lookaside buffer (DTLB) accesses impact energy usage as they frequently occur and each L1 DC and DTLB access uses significantly more energy than a register file access. Often, multiple memory operations will reference the same cache line using the same register, such as when iterating through an array. We propose to memoize L1 DC access information, such as the L1 DC data array way and the DTLB way, by associating this information with the register used to access it. When a load or store calculates the memory address, we detect whether the calculated address shares the cache line memoized with the base register. If so, we avoid the L1 DC tag array access and the DTLB access to determine the L1 DC way and instead use the memoized information. In addition, only a single data array way in a set-associative L1 DC needs to be accessed during a load instruction when the L1 DC way has been memoized. Our nonspeculative memoization approach can be applied before a speculative approach, allowing a significant reduction in data access energy usage for existing executables with no ISA modifications.

Level-one data cache (L1 DC) accesses impact energy usage as they frequently occur and use significantly more energy than register file accesses. A memory access instruction consists of an address generation operation calculating the location where the data item resides in memory and the data access operation that loads/stores a value from/to that location. We propose to decouple these two operations into separate machine instructions to reduce energy usage. By associating the data translation lookaside buffer (DTLB) access and level-one data cache (L1 DC) tag check with an address generation instruction, only a single data array in a set-associative L1 DC needs to be accessed during a load instruction when the result of the tag check is known at that point. In addition, many DTLB accesses and L1 DC tag checks are avoided by memoizing the DTLB way and L1 DC way with the register that holds the memory address to be dereferenced. Finally, we are able to often coalesce an ALU operation with a load or store data access using our technique to reduce the number of instructions executed.