Component parameters determine the modeling and control accuracy, and affect the performance and reliability of a power electronic system. Therefore, online identification of component parameters is very important. The existing identification methods mostly adopt the integer-order model, which is low in precision and inconsistent with practice. To solve these issues, the fractional-order model (FOM) of the buck converter is established by fractional calculus in this paper. Comparing the similarities in structure between the FOM and neural network, an identification method with the neural network is proposed. The method can realize the online identification of capacitance and order with high accuracy and fast convergence speed. Additionally, the identification results are influenced by the memory length of the FOM and the learning rate of the neural network. Finally, the experimental platform for parameter identification of buck converters is built, and the simulation and experimental results both verify the effectiveness of the proposed method.

Since the design of wireless MIMO systems requires knowledge of the double-directional (i.e., directionally resolved at both link ends) channel characteristics, and 5G/6G use higher frequency bands, there is the need for double-directional measurements in the mmWave spectrum, along with channel sounders that can accurately perform such measurements. This paper introduces a novel channel sounding approach based on a redirecting rotating mirror arrangement (ReRoMA). The method is low-cost and flexible as it requires only a single radio frequency chain at each link end and performs mechanical beamsteering. However, in contrast to existing rotating-horn systems, it physically separates the signal generation/transmission and the beam steering components, resulting in orders-of-magnitude faster measurements. The paper outlines the fundamental concept, describes details of the implementation, and demonstrates its application and accuracy using a 60GHz prototype for measurements in static reference scenarios, as well as dynamic measurements. We illustrate the detected propagation paths using dynamic angular and delay power spectra and correlate these findings with the surrounding environmental structure. Locations of environmental objects are detected within the Fourier resolution determined by bandwidth and horn width, with no noticeable degradation due to the faster measurements.

Cell-free massive MIMO (CF-mMIMO), where each user equipment (UE) is connected to multiple access points (APs), is emerging as an important component for fifth-generation (5G) and sixth-generation (6G) cellular systems. Accurate channel models based on measurements are required to optimize the design and deployment of such systems. This paper presents an extensive measurement campaign for CF-mMIMO in an urban environment. A new “virtual AP” technique measures channels between 80 UE locations and more than 20, 000 possible micro-cellular AP locations. Measurements are done at 3.5 GHz carrier frequency with 350 MHz bandwidth (BW). The paper describes the measurement setup and data processing, shows sample results and their physical interpretation, and provides statistics for key quantities such as pathloss, shadowing, delay spread (DS), and delay window. We find pathloss coefficients of 2.9 and 10.4 for line-of-sight (LOS) and non line-of-sight (NLOS), respectively, where the high LOS coefficient is mainly because larger distance leads to more grazing angle of incidence and thus lower antenna gain in our setup. Shadowing standard deviations are 5.1/16.6 dB, and root mean squared (RMS) DSs of -80.6/-72.6 dBs, where dBs is defined as$t_{\mathrm { dBs}}=10\log _{10}(t_{\mathrm { sec}})$. The measurements can also be used for parameterizing a certain type of channel model, namely Cell-free massive MIMO for Urban Non-stationary Environment with Correlations (CUNEC), which will be reported in future work.

With the move towards 6G and associated technology deployment in higher frequency bands, measurements of directionally-resolved channels and sounders capable of performing such measurements are a necessity. In this paper, we present a new concept of channel sounding based on a Redirecting Rotating Mirror Arrangement (ReRoMA), capable of performing double-directional channel measurements at millimeter wave frequencies by mechanical beam steering orders of magnitude faster than existing rotating-horn arrangements. We present this new concept, describe a prototype operating at 60 GHz, and use it to perform, as proof-of-principle, a dynamic cart-to-cart channel measurements at a T-intersection scenario. We show that this sounding principle works and allows the directional evaluation of the channel. We visualize the different resolvable propagation paths in terms of dynamic angular and delay power spectrum, and relate them to the environmental geometry.

The design of cell-free massive MIMO (CF-mMIMO) systems requires accurate, measurement-based channel models. This paper provides the first results from the by far most extensive outdoor measurement campaign for CF-mMIMO channels in an urban environment. We measured impulse responses between over 20, 000 potential access point (AP) locations and 80 user equipments (sUEs) at 3.5 GHz with 350 MHz bandwidth (BW). Measurements use a “virtual array” approach at the AP and a hybrid switched/virtual approach at the UE. This paper describes the sounder design, measurement environment, data processing, and sample results, particularly the evolution of the power-delay profiles (sPDPs) as a function of the AP locations, and its relation to the propagation environment.

Condensed channel parameters, such as Root Mean Square (RMS) delay spread and angular spread, are essential ways of representing results from the measurement of wireless propagation channels. However, real-world measurements are invariably affected by noise, which is not inherently reduced by the Fourier processing - in contrast to high-resolution parameter estimation. Even when the signal-to-noise ratio is relatively high, e.g., 20 dB, the impact of the noise on the condensed parameters can be significant and lead to erroneous estimates. This can be explained, e.g., for the computation of the RMS delay spread, where long delays (which often carry noise only) are "up-weighted" by the square of the delay. While techniques like noise thresholding are often applied, the reasons for choosing thresholds are usually not described in detail. This paper systematically analyzes noise thresholding for joint delay-angle measurements and derives equations for the impact of thresholds on the computation of delay and angle RMS spreads and window parameters under various measurement circumstances. The paper provides results based on closed-form equations, as well as MonteCarlo (MC) simulations, and application to real-world measurements in the sub-THz band.

A framework is proposed for developing and evaluating algorithms for extracting multipath propagation components (MPCs) from measurements collected by channel sounders at millimeter-wave frequencies. Sounders equipped with an omni-directional transmitter and a receiver with a uniform planar array (UPA) are considered. An accurate mathematical model is developed for the spatial frequency response of the sounder that incorporates the non-ideal cross-polar beampatterns for the UPA elements. Due to the limited Field-of-View (FoV) of each element, the model is extended to accommodate multi-FoV measurements in distinct azimuth directions. A beamspace representation of the spatial frequency response is leveraged to develop three progressively complex algorithms aimed at solving the single-snapshot maximum likelihood estimation problem: greedy matching pursuit (CLEAN), space-alternative generalized expectation-maximization (SAGE), and RiMAX. The first two are based on purely specular MPCs whereas RiMAX also accommodates diffuse MPCs. Two approaches for performance evaluation are proposed, one with knowledge of ground truth parameters, and one based on reconstruction mean-squared error. The three algorithms are compared through a demanding channel model with hundreds of MPCs and through real measurements. The results demonstrate that CLEAN gives quite reasonable estimates which are improved by SAGE and RiMAX. Lessons learned and directions for future research are discussed.

Development of a comprehensive channel propagation model for high-fidelity design and deployment of wireless communication networks necessitates an exhaustive measurement campaign in a variety of operating environments and with different configuration settings. As the campaign is time-consuming and expensive, the effort is typically shared by multiple organizations, inevitably with their own channel-sounder architectures and processing methods. Without proper benchmarking, it cannot be discerned whether observed differences in the measurements are actually due to the varying environments or to discrepancies between the channel sounders themselves. The simplest approach for benchmarking is to transport participant channel sounders to a common environment, collect data, and compare results. Because this is rarely feasible, this paper proposes an alternative methodology - which is both practical and reliable - based on a mathematical system model to represent the channel sounder. The model parameters correspond to the hardware features specific to each system, characterized through precision, in situ calibration to ensure accurate representation; to ensure fair comparison, the model is applied to a ground-truth channel response that is identical for all systems. Five worldwide organizations participated in the cross-validation of their systems through the proposed methodology. Channel sounder descriptions, calibration procedures, and processing methods are provided for each organization as well as results and comparisons for 20 ground-truth channel responses.

This paper investigates the capability of millimeter-wave (mmWave) channel sounders with phased arrays to perform super-resolution parameter estimation, i.e., determine the parameters of multipath components (MPC), such as direction of arrival and delay, with resolution better than the Fourier resolution of the setup. We analyze the question both generally, and with respect to a particular novel multi-beam mmWave channel sounder that is capable of performing multiple-input-multiple-output (MIMO) measurements in dynamic environments. We firstly propose a novel two-step calibration procedure that provides higher-accuracy calibration data that are required for Rimax or SAGE. Secondly, we investigate the impact of center misalignment and residual phase noise on the performance of the parameter estimator. Finally we experimentally verify the calibration results and demonstrate the capability of our sounder to perform super-resolution parameter estimation.