This paper addresses the problem of indoor radio environment mapping (REM), which has a range of applications in wireless networks. We develop a novel deep learning framework called Trans-REM for solving the indoor REM problem. Unlike most works in this domain, which use convolutional neural networks (CNN), we propose a novel hybrid architecture that combines the complementary strengths of CNNs and transformers. In Trans-REM, a CNN is used for local spatial feature extraction, and a transformer is used for capturing the global context. Additionally, we develop new techniques to generate two auxiliary input images, namely, a line-of-sight image and an antenna radiation pattern image, that assist Trans-REM in learning effectively for indoor environments. Numerical evaluations using a comprehensive dataset show that Trans-REM achieves superior prediction accuracy in complex indoor environments and outperforms state-of-the-art REM methods by at least 15% in terms of mean squared error.

Even as the COVID-19 pandemic drove advances in contact tracing and exposure notification systems, user privacy challenges continue to plague otherwise promising approaches to contain contagions. We propose a novel, scalable approach to address privacy in contact tracing that improves utility. We apply passive WiFi scan data using two metrics suitable for estimating contact between users. We support this with real world experimental data captured across a range of environments relevant to contact tracing. To preserve privacy, we leverage properties of truncated cryptographic hashes in an adaptation unique to contact tracing. This hash collision filter allows users to share information about potential contacts with a central server without revealing sensitive information. Using an aggressive threat model, including adversarial users and a malicious server, we share how this technique can improve utility while still providing strong security protections compared to other approaches using, for example, only Bluetooth (BT) or global navigation satellite systems (GNSSs). Finally, we discuss a capability of this approach that allows notification for asynchronous co-location from past contacts.

Hybrid arrays enable millimeter-wave (mmW) base stations and users to steer multiple beams simultaneously. However, in dense mmW networks with small inter-site distances and many users, a large number of serving beams can lead to significant inter- and intra-cell interference that prevents data-hungry users from satisfying their rate requirements. In this work, we address this problem by designing a linear multi-step optimization framework for user association and beam scheduling with interference management. In the first step, the framework aims to maximize the number of users with fully satisfied rate requirements by scheduling a minimal number of non-interfering beams. In the second step, any remaining non-interfering beams are distributed among other users to maximize the number of them with at least partially satisfied requirements. Hybrid precoders and combiners are then designed to remove any excess sidelobe interference among the scheduled beams. Finally, power allocation is optimized on a network level to boost the data rates of the partially satisfied users. Given that the framework includes NP-hard optimization problems, we propose an algorithm that attains a sub-optimal solution in polynomial-time. The proposed framework is numerically evaluated in realistic mmW channels and the results reveal its advantages over the baseline user association schemes.

In this paper, we introduce a runtime-efficient radio frequency (RF) map prediction method based on UNet convolutional neural networks (CNNs), trained on a large-scale 3D maps dataset. The proposed method calculates the line-of-sight maps and feeds them as input for the UNet CNN. A special Kullback–Leibler divergence loss function is adopted, enabling the proposed method to minimize both error’s mean and variance. The performance of our model is evaluated in the context of the 2023 IEEE ICASSP Signal Processing Grand Challenge, namely, the First Pathloss Radio Map Prediction Challenge. The evaluation results demonstrate that the proposed method achieves an average normalized root-mean-square error (RMSE) of 0.045 with an average of 14 milliseconds (ms) runtime.

Spatia1 prediction of the radio propagation environment (henceforth ‘radio environment’ for brevity) of a transmitter can assist and improve various aspects of wireless networks. The majority of research in this domain can be categorized as ‘reactive’ spatial prediction, where the predictions are made based on a small set of measurements from an active transmitter whose radio environment is to be predicted. Emerging spectrum-sharing paradigms would benefit from ‘proactive’ spatial prediction of the radio environment, where the spatial predictions must be done for a transmitter for which no measurement has been collected. This paper proposes a novel, supervised deep learning-based framework, ProSpire, that enables spectrum sharing by leveraging the idea of proactive spatial prediction. We carefully address several challenges in ProSpire, such as designing a framework that conveniently collects training data for learning, performing the predictions in a fast manner, enabling operations without an area map, and ensuring that the predictions do not lead to undesired interference. ProSpire relies on the crowdsourcing of transmitters and receivers during their normal operations to address some of the aforementioned challenges. The core component of ProSpire is a deep learning-based image-to-image translation method, which we call RSSu-net. We generate several diverse datasets using ray tracing software and numerically evaluate ProSpire. Our evaluations show that RSSu-net performs reasonably well in terms of signal strength prediction, $\approx$ 5dB mean absolute error, which is comparable to the average error of other relevant methods. Importantly, due to the merits of RSSu-net, ProSpire creates proactive boundaries around transmitters such that they can be activated with $\approx$ 97% probability of not causing interference. In this regard, the performance of RSSu-net is 19% better than that of other comparable methods.

Software defined radios (SDRs) are often used in the experimental evaluation of next-generation wireless technologies. While crowdsourced spectrum monitoring is an important component of future spectrum-agile technologies, there is no clear way to test it in the real world, i.e., with hundreds of users each carrying an SDR while uploading data to a cloud-based controller. Current fully functional SDRs are bulky, with components connected via wires, and last at most hours on a single battery charge. To address these needs, we design and develop a compact, portable, untethered, and inexpensive SDR we callSitara. Our SDR interfaces with a mobile device over Bluetooth 5 and can function standalone or as a client to a central command and control server. It transmits and receives common waveforms, uploads IQ samples or processed receiver data through a mobile device to a server for remote processing and performs spectrum sensing functions. We present results from a user study involving more than 100 participants to evaluate Sitara in a hypothetical large-scale crowdsourced spectrum monitoring application. We also present a comparative analysis of Sitara to related crowdsensing systems with a particular emphasis on the role of incentives and user participation.

Wireless systems are an integral part of aviation. Apart from their apparent use in air-to-ground communication, wireless systems play a crucial role in avionic functions including navigation and landing. An interference-free wireless environment is therefore critical for the uninterrupted operation and safety of an aircraft. Hence, there is an urgency for airport facilities to acquire the capability to continuously monitor aviation frequency bands for real-time detection of interference and anomalies. To meet this critical need, we design and build AviSense, an SDR-based real-time , versatile system for monitoring aviation bands. AviSense detects and characterizes signal activities to enable practical and effective anomaly detection. We identify and tackle the challenges posed by a diverse set of critical aviation bands and technologies. We evaluate our methodology with real-world aviation signal measurements and two custom datasets of anomalous signals. We find that our signal classification capability achieves a true positive rate of ∼99%, with few exceptions, and a false positive rate of less than 4%. We also demonstrate that AviSense can effectively distinguish between different types of anomalies. We build and evaluate a prototype implementation of AviSense that supports distributed monitoring.

We propose using Carrier Sensing (CS) for distributed interference management in millimeter-wave (mmWave) cellular networks where spectrum is shared by multiple operators that do not coordinate among themselves. In addition, even the base station sites can be shared by the operators. We describe important challenges in using traditional CS in this setting and propose enhanced CS protocols to address these challenges. Using stochastic geometry, we develop a general framework for downlink coverage probability analysis of our shared mmWave network in the presence of CS and derive the downlink coverage probability expressions for several CS protocols. Our work is the first to investigate and analyze (using stochastic geometry) CS for mmWave networks with spectrum and BS sites shared among non-coordinating operators. We evaluate the downlink coverage probability of our shared mmWave network using simulations as well as numerical examples based on our analysis. Our evaluations show that our proposed approach leads to an improvement in coverage probability, compared to the coverage probability with no CS, for higher values of signal-to-interference and noise ratio (SINR). Interestingly, our evaluations also reveal that for lower values of SINR, not using any CS is the best strategy in terms of the downlink coverage probability.

This paper studies the problem of distributed beam scheduling for 5G millimeter-Wave (mm-Wave) cellular networks where base stations (BSs) belonging to different operators share the same spectrum without centralized coordination among them. Our goal is to design efficient distributed scheduling algorithms to maximize the network utility, which is a function of the achieved throughput by the user equipment (UEs), subject to the average and instantaneous power consumption constraints of the BSs. We propose a Media Access Control (MAC) and a power allocation/adaptation mechanism utilizing the Lyapunov stochastic optimization framework and non-cooperative games. In particular, we first decompose the original utility maximization problem into two sub-optimization problems for each time frame, which are a convex optimization problem and a non-convex optimization problem, respectively. By formulating the distributed scheduling problem as a non-cooperative game where each BS is a player attempting to optimize its own utility, we provide a distributed solution to the non-convex sub-optimization problem via finding the Nash Equilibrium (NE) of the game whose weights are determined optimally by the Lyapunov optimization framework. Finally, we conduct simulation under various network settings to show the effectiveness of the proposed game-based beam scheduling algorithm in comparison to that of several reference schemes.

We present DeepRadar, a novel deep-learning-based environmental sensing capability system for detecting radar signals and estimating their spectral occupancy. DeepRadar makes decisions in real-time and maintains continuous operability by adapting its computations based on the available computing resources. We thoroughly evaluate DeepRadar using a variety of test data at different signal-to-interference ratio (SIR) levels. Our evaluation results show that at 20 dB peak-to-average SIR, per MHz, DeepRadar detects radar signals with 99% accuracy and misses only less than 2 MHz, on average, while estimating their spectral occupancy. Our implementation of DeepRadar using a commercial-off-the-shelf software-defined radio also achieves a similarly high detection accuracy.

We present LLOCUS, a novel learning-based system that uses mobile crowdsourced RF sensing to estimate the location and power of unknown mobile transmitters in real time, while allowing unrestricted mobility of the crowdsourcing participants. We carefully identify and tackle several challenges in learning and localizing, based on RSS, in such a dynamic environment. We decouple the problem of localizing a transmitter with unknown transmit power into two problems, 1) predicting the power of a transmitter at an unknown location, and 2) localizing a transmitter with known transmit power. LLOCUS first estimates the power of the unknown transmitter and then scales the reported RSS values such that the unknown transmit power problem is transparent to the method of localization. We evaluate LLOCUS using three experiments in different indoor and outdoor environments. We find that LLOCUS reduces the localization error by 17-68% compared to several non-learning methods.

Software-defined radios (SDRs) are often used in the experimental evaluation of next-generation wireless technologies. While crowd-sourced spectrum monitoring is an important component of future spectrum-agile technologies, there is no clear way to test it in the real world, i.e., with hundreds of users each carrying an SDR while uploading data to a cloud-based controller. Current fully functional SDRs are bulky, with components connected via wires, and last at most hours on a single battery charge. To address the needs of such experiments, we design and develop a compact, portable, untethered, and inexpensive SDR we call Sitara. Our SDR interfaces with a mobile device over Bluetooth 5 and can function standalone or as a client to a central command and control server. The Sitara offers true portability: it operates up to one week on battery power, requires no external wired connections and occupies a footprint smaller than a credit card. It transmits and receives common waveforms, uploads IQ samples or processed receiver data through a mobile device to a server for remote processing and performs spectrum sensing functions. Multiple Sitaras form a distributed system capable of conducting experiments in wireless networking and communication in addition to RF monitoring and sensing activities. In this paper, we describe our design, evaluate our solution, present experimental results from multi-sensor deployments and discuss the value of this system in future experimentation.

Many networked users through their devices are interested in participating in distributed sensing and data collection for the purpose of betterment of human society or for earning rewards. Preservation of their location privacy is an important requirement for users participating and contributing to the data collection. We develop a novel privacy preserving approach for collecting noise-free data from vehicular users. Collection of noise-free, "pure" data, enhances its utility in the applications that use it. Location privacy must be preserved from the entity that we call a central controller, that collects all the vehicular data, and is assumed to be adversarial. We collect the data in a noise-free form by introducing temporal and spatial variations using Random Delays and Indirections. We run simulations using network and vehicle simulators driven by a real-world traffic scenario from the city of Luxembourg to evaluate our approach. Our simulation results show that the adversary cannot localize the uploaders within the thresholds of the number of streets and the length of the region of interest chosen by them.

The current mechanisms for locating spectrum offenders are time consuming, human-intensive, and expensive. In this paper, we propose a novel approach to locate spectrum offenders using crowdsourcing. In such a participatory sensing system, privacy and bandwidth concerns preclude distributed sensing devices from reporting raw signal samples to a central agency; instead, devices would be limited to measurements of received power. However, this limitation enables a smart attacker to evade localization by simultaneously transmitting from multiple infected devices. Existing localization methods are insufficient or incapable of locating multiple sources when the powers from each source cannot be separated at the receivers. In this paper, we first propose a simple and efficient method that simultaneously locates multiple transmitters using the received power measurements from the selected devices. Second, we build sampling approaches to select sensing devices required for localization. Next, we enhance our sampling to also take into account incentives for participation in crowdsourcing. We experimentally evaluate our localization framework under a variety of settings and find that we are able to localize multiple sources transmitting simultaneously with reasonably high accuracy in a timely manner.