This work presents an approach for combining household demographic and living standards survey questions with features derived from satellite imagery to predict the poverty rate of a region. Our approach utilizes visual features obtained from a single-step featurization method applied to freely available 10m/px Sentinel-2 surface reflectance satellite imagery. These visual features are combined with ten survey questions in a proxy means test (PMT) to estimate whether a household is below the poverty line. We show that the inclusion of visual features reduces the mean error in poverty rate estimates from 4.09% to 3.88% over a nationally representative out-of-sample test set. In addition to including satellite imagery features in proxy means tests, we propose an approach for selecting a subset of survey questions that are complementary to the visual features extracted from satellite imagery. Specifically, we design a survey variable selection approach guided by the full survey and image features and use the approach to determine the most relevant set of small survey questions to include in a PMT. We validate the choice of small survey questions in a downstream task of predicting the poverty rate using the small set of questions. This approach results in the best performance – errors in poverty rate decrease from 4.09% to 3.71%. We show that extracted visual features encode geographic and urbanization differences between regions.

This work presents an application of the epitome model to downscale low-resolution satellite GOES-16 LST products. The goal of the research work is to generate a high temporal high spatial resolution LST by fusing high temporal resolution GOES-16’s 2km LST product with high spatial resolution, 30m, auxiliary image products obtained from Landsat 8 imagery. The approach used seeks to extend an epitomic-based representation approach used for classification label super-resolution to downscaling a continuous variable like LST. Experiments were conducted using GOES-16 and Landsat 8 imagery from El Paso, Texas. The qualitative and quantitative results of the presented experiments paint an overall favorable picture for the proposed approach with some instances where the performance is lower than expected primarily due to the limitation of using sun synchronous Landsat 8 data for algorithm training. Furthermore, land cover and seasonal dependency were studied. The algorithm performed better for grassland & shrubland than for other land covers and performed better for winter and fall than for summer and spring.

Remotely sensed geospatial data are critical for applications including precision agriculture, urban planning, disaster monitoring and response, and climate change research, among others. Deep learning methods are particularly promising for modeling many remote sensing tasks given the success of deep neural networks in similar computer vision tasks and the sheer volume of remotely sensed imagery available. However, the variance in data collection methods and handling of geospatial metadata make the application of deep learning methodology to remotely sensed data nontrivial. For example, satellite imagery often includes additional spectral bands beyond red, green, and blue and must be joined to other geospatial data sources that can have differing coordinate systems, bounds, and resolutions. To help realize the potential of deep learning for remote sensing applications, we introduce TorchGeo, a Python library for integrating geospatial data into the PyTorch deep learning ecosystem. TorchGeo provides data loaders for a variety of benchmark datasets, composable datasets for generic geospatial data sources, samplers for geospatial data, and transforms that work with multispectral imagery. TorchGeo is also the first library to provide pre-trained models for multispectral satellite imagery (e.g., models that use all bands from the Sentinel-2 satellites), allowing for advances in transfer learning on downstream remote sensing tasks with limited labeled data. We use TorchGeo to create reproducible benchmark results on existing datasets and benchmark our proposed method for preprocessing geospatial imagery on the fly. TorchGeo is open source and available on GitHub: https://github.com/microsoft/torchgeo.

AI for good (AI4G) projects involve developing and applying artificial intelligence (AI) based solutions to further goals in areas such as sustainability, health, humanitarian aid, and social justice. Developing and deploying such solutions must be done in collaboration with partners who are experts in the domain in question and who already have experience in making progress towards such goals. Based on our experiences, we detail the different aspects of this type of collaboration broken down into four high-level categories: communication, data, modeling, and impact, and distill eleven takeaways to guide such projects in the future. We briefly describe two case studies to illustrate how some of these takeaways were applied in practice during our past collaborations.

Longitudinal studies are vital to understanding dynamic changes of the planet, but labels (e.g., buildings, facilities, roads) are often available only for a single point in time. We propose a general model, Temporal Cluster Matching (TCM), for detecting building changes in time series of remotely sensed imagery when footprint labels are observed only once. The intuition behind the model is that the relationship between spectral values inside and outside of building’s footprint will change when a building is constructed (or demolished). For instance, in rural settings, the pre-construction area may look similar to the surrounding environment until the building is constructed. Similarly, in urban settings, the pre-construction areas will look different from the surrounding environment until construction. We further propose a heuristic method for selecting the parameters of our model which allows it to be applied in novel settings without requiring data labeling efforts (to fit the parameters). We apply our model over a dataset of poultry barns from 2016/2017 high-resolution aerial imagery in the Delmarva Peninsula and a dataset of solar farms from a 2020 mosaic of Sentinel 2 imagery in India. Our results show that our model performs as well when fit using the proposed heuristic as it does when fit with labeled data, and further, that supervised versions of our model perform the best among all the baselines we test against. Finally, we show that our proposed approach can act as an effective data augmentation strategy – it enables researchers to augment existing structure footprint labels along the time dimension and thus use imagery from multiple points in time to train deep learning models. We show that this improves the spatial generalization of such models when evaluated on the same change detection task.

Modern deep learning-based semantic segmentation models and traditional pattern matching segmentation methods demonstrate similar failure modes in mapping land cover from diverse satellite/aerial imagery. The key problem is that these models mostly respond to textures and colors which, locally, do tend to have consistent land cover labels, but may resemble very different labels in imagery acquired farther away, with a different sensor, or under new imaging conditions. One way to resolve this issue is to endow the algorithms with higher-level, human-like reasoning abilities - e.g., an awareness that houses are connected to roads with driveways, that roads connect towns, and that bridges cast shadows - and the mechanism for tracking such objects across larger areas in order to resolve ambiguity. We propose an alternative approach of human-machine collaboration for creating land cover maps, motivated by the fact that a large amount of human labor is necessary even in seemingly automated land cover mapping solutions. We build spatial ensembles of land cover models with weak supervision and treat them as a hypothesis space. Then, we build an interface where humans, aware of the higher-level structure in imagery, can act to select, apply, and refine these models locally, with the goal of minimizing the labor required to create a land cover map.

We propose incorporating human labelers in a model fine-tuning system that provides immediate user feedback. In our framework, human labelers can interactively query model predictions on unlabeled data, choose which data to label, and see the resulting effect on the model's predictions. This bi-directional feedback loop allows humans to learn how the model responds to new data. We implement this framework for fine-tuning high-resolution land cover segmentation models and compare human-selected points to points selected using standard active learning methods. Specifically, we fine-tune a deep neural network – trained to segment high-resolution aerial imagery into different land cover classes in Maryland, USA – to a new spatial area in New York, USA using both our human-in-the-loop method and traditional active learning methods. The tight loop in our proposed system turns the algorithm and the human operator into a hybrid system that can produce land cover maps of large areas more efficiently than the traditional workflows. Our framework has applications in machine learning settings where there is a practically limitless supply of unlabeled data, of which only a small fraction can feasibly be labeled through human efforts, such as geospatial and medical image-based applications.

Normalization layers have been shown to improve convergence in deep neural networks, and even add useful inductive biases. In many vision applications the local spatial context of the features is important, but most common normalization schemes including Group Normalization (GN), Instance Normalization (IN), and Layer Normalization (LN) normalize over the entire spatial dimension of a feature. This can wash out important signals and degrade performance. For example, in applications that use satellite imagery, input images can be arbitrarily large; consequently, it is nonsensical to normalize over the entire area. Positional Normalization (PN), on the other hand, only normalizes over a single spatial position at a time. A natural compromise is to normalize features by local context, while also taking into account group level information. In this pa- per, we propose Local Context Normalization (LCN): a normalization layer where every feature is normalized based on a window around it and the filters in its group. We propose an algorithmic solution to make LCN efficient for arbitrary window sizes, even if every point in the image has a unique window. LCN outperforms its Batch Normalization (BN), GN, IN, and LN counterparts for object detection, semantic segmentation, and instance segmentation applications in several benchmark datasets, while keeping performance in- dependent of the batch size and facilitating transfer learning.

We address the problem of automatically fusing hyperspectral data of a digitized scene with an image-based 3D model, overlapping the same scene, in order to associate material spectra with corresponding height information for improved scene understanding. The datasets have been independently collected at different spatial resolutions by different aerial platforms and the georegistration information about the datasets is assumed to be insufficient or unavailable. We propose a method to solve the fusion problem by associating Scale Invariant Feature Transform (SIFT) descriptors from the hyperspectral data with the corresponding 3D point cloud in a large scale 3D model. We find the correspondences efficiently without affecting matching performance by limiting the initial search space to the centroids obtained after performing k-means clustering. Finally, we apply the Optimal Randomized RANdom Sample Consensus (RANSAC) algorithm to enforce geometric alignment of the hyperspectral images onto the 3D model. We present preliminary results that show the effectiveness of the method using two large datasets collected from drone-based sensors in an urban setting.