Adaptive video streaming has become a core technology for modern video delivery, particularly in cellular networks. However, the growing dynamics of mobile environments and the diversity of user preferences present major challenges for adaptive bitrate (ABR) algorithms. Existing approaches often struggle to maintain a balance between high in-distribution performance and strong generalization across heterogeneous network conditions and personalized Quality of Experience (QoE) demands. To address these challenges, we propose NMoEABR, a unified ABR decision-making framework that integrates a nonlinear Mixtureof- Experts (NMoE) architecture with preference-aware metareinforcement learning. Specifically, we design an NMoE-based actor network that adaptively aggregates expert policies through dynamic convolution conditioned on real-time network states, thereby enhancing robustness and cross-network generalization in a zero-hot manner. Furthermore, to mitigate convergence difficulties arising from the joint optimization of expert policies and expert-weight prediction, we introduce a preference-aware meta-RL strategy that incorporates user preference embeddings and virtual preference synthesis to stabilize meta-policy updates. Comprehensive evaluations on real-world traces and wireless testbed demonstrate that NMoEABR consistently outperforms mainstream ABR benchmarks in terms of average QoE, stability, and adaptability, particularly under unseen network conditions and diverse user preference distributions.

This paper studies an unmanned aerial vehicle (UAV)-enabled wireless sensor network, in which one UAV flies in the sky to collect the data transmitted from a set of ground nodes (GNs) via distributed beamforming. We consider two scenarios with delay-tolerant and delay-sensitive applications, in which the GNs send the common/shared messages to the UAV via adaptive- and fixed-rate transmissions, respectively. For the two scenarios, we aim to maximize the average data-rate throughput and minimize the transmission outage probability, respectively, by jointly optimizing the UAV’s trajectory design and the GNs’ transmit power allocation over time, subject to the UAV’s flight speed constraints and the GNs’ individual average power constraints. However, the two formulated problems are both non-convex and thus generally difficult to be optimally solved. To tackle this issue, we first consider the relaxed problems in the ideal case with the UAV’s flight speed constraints ignored, for which the well-structured optimal solutions are obtained to reveal the fundamental performance upper bounds. It is shown that for the two approximate problems, the optimal trajectory solutions have the same multi-location-hovering structure, but with different optimal power allocation strategies. Next, for the general problems with the UAV’s flight speed constraints considered, we propose efficient algorithms to obtain high-quality solutions by using the techniques from convex optimization and approximation. Finally, numerical results show that our proposed designs significantly outperform other benchmark schemes, in terms of the achieved data-rate throughput and outage probability under the two scenarios. It is also observed that when the mission period becomes sufficiently long, our proposed designs approach the performance upper bounds when the UAV’s flight speed constraints are ignored.

Different from public 4G/5G networks that are dominated by downlink (DL) traffic, emerging 5G non-public networks (NPNs) need to support significant uplink (UL) traffic to enable emerging applications such as industrial Internet of things (IIoT). The UL-DL spectrum sharing is becoming a viable solution to enhance the UL throughput of NPNs, which allows NPNs to perform the UL transmission over the time-frequency resources configured for DL transmission in coexisting public networks. To deal with the severe interference from the DL public base station (BS) transmitter to the coexisting UL non-public BS receiver, we propose an adaptive asymmetric successive interference cancellation (SIC) approach, in which the non-public BS is enabled to have the capability of decoding the DL signals transmitted from the public BS and cancelling them for interference mitigation. In particular, this paper studies a basic UL-DL spectrum sharing scenario when a UL non-public BS and a DL public BS coexist in the same area, each communicating with multiple users via orthogonal frequency-division multiple access (OFDMA). Under this setup, we aim to maximize the common UL throughput of all non-public users, under the condition that the DL throughput of each public user is above a certain threshold. The decision variables include the subcarrier allocation and user scheduling for both non-public and public BSs, the receiver mode of the non-public BS over subcarriers, as well as the rate and power control. Numerical results show that the proposed design significantly improves the common UL throughput as compared to benchmark schemes without such consideration.

This paper studies an unmanned aerial vehicle (UAV)-enabled two-user interference channel for wireless powered communication networks (WPCNs). In this system, two UAVs wirelessly charge two low-power Internet-of-things (IoT)-devices on the ground and collect information from them. We consider two scenarios when both UAVs cooperate in energy transmission and/or information reception via interference coordination and coordinated multi-point (CoMP), respectively. For both scenarios, the UAVs' trajectories are designed to not only enhance the wireless power transfer (WPT) efficiency in the downlink, but also mitigate the co-channel interference for wireless information transfer (WIT) in the uplink. In particular, the objective is to maximize the uplink common (minimum) throughput of the two IoT-devices over a finite UAV mission period, by jointly optimizing the trajectories of both UAVs and the downlink/uplink wireless resource allocation, subject to the maximum flying speed and collision avoidance constraints for UAVs, as well as the individual energy neutrality constraints at IoT-devices. Under both scenarios with interference coordination and CoMP, we first obtain the optimal solutions to the two common-rate maximization problems for the special case with sufficiently long UAV mission duration. Next, we obtain high-quality solutions for the practical case with finite UAV mission duration by using the alternating optimization and successive convex approximation (SCA). Numerical results show that the proposed designs significantly outperform benchmark schemes, and the utilization of CoMP achieves much higher uplink throughput than interference coordination.

This paper studies an unmanned aerial vehicle (UAV)-enabled wireless powered communication network (WPCN), in which a UAV is dispatched as a mobile access point (AP) to serve a set of ground users periodically. The UAV employs the radio frequency (RF) wireless power transfer (WPT) to charge the users in the downlink, and the users use the harvested RF energy to send independent information to the UAV in the uplink. Unlike the conventional WPCN with fixed APs, the UAV-enabled WPCN can exploit the mobility of the UAV via trajectory design, jointly with the wireless resource allocation optimization, to maximize the system throughput. In particular, we aim to maximize the uplink common (minimum) throughput among all ground users over a finite UAV's flight period, subject to its maximum speed constraint and the users' energy neutrality constraints. The resulted problem is nonconvex and thus difficult to be solved optimally. To tackle this challenge, we first consider an ideal case without the UAV's maximum speed constraint, and obtain the optimal solution to the relaxed problem. The optimal solution shows that the UAV should successively hover above a finite number of ground locations for downlink WPT, as well as above each of the ground users for uplink communication. Next, we consider the general problem with the UAV's maximum speed constraint. Based on the above multilocation-hovering solution, we first propose an efficient successive hover-and-fly trajectory design, jointly with the downlink and uplink wireless resource allocation, and then propose a locally optimal solution by applying the techniques of alternating optimization and successive convex programming (SCP). Numerical results show that the proposed UAV-enabled WPCN achieves significant throughput gains over the conventional WPCN with fixed-location AP.

This paper studies an unmanned aerial vehicle (UAV)-enabled wireless powered communication network (WPCN), in which a UAV is dispatched as a mobile access point (AP) to serve a set of ground users periodically. The UAV employs the radio frequency (RF) wireless power transfer (WPT) to charge the users in the downlink, and the users use the harvested RF energy to send independent information to the UAV in the uplink. Unlike the conventional WPCN with fixed APs, the UAV-enabled WPCN can exploit the mobility of the UAV via periodic trajectory design, jointly with the transmission resource allocation optimization, to improve the system performance. In particular, we aim to maximize the uplink common (minimum) throughput among all ground users over a finite UAV's flight period, subject to its maximum speed constraint and the users' energy neutrality constraints. The resulting problem is non-convex and thus difficult to be solved optimally. To tackle this challenge, we first consider an ideal case without the maximum UAV speed constraint, and obtain the optimal solution to the relaxed problem. The optimal solution shows that the UAV should successively hover above a finite number of ground locations for downlink WPT, as well as above each of the ground users for uplink communication. Next, based on the above multi-location-hovering solution, we propose a successive hover-and-fly trajectory, jointly with the downlink and uplink power allocations, to find an efficient suboptimal solution to the problem with the maximum UAV speed constraint. Numerical results show that the proposed UAV-enabled WPCN achieves significant common throughput gain over the conventional WPCN with a fixed-location AP.