Many datacenter operators have deployed FPGAs as hardware accelerators because their reconfigurability allows them to be repurposed as the application mix changes. Directly attaching the FPGA to the network further reduces latency, improves cost-performance, and reduces energy use relative to mediating network communications with CPUs. However, building accelerated applications or services for direct-attached FPGAs is challenging, especially with the complex I/O and multi-accelerator capacity of modern FPGAs. To address this, we propose Apiary, a microkernel operating system for direct-attached FPGA accelerators. The key idea in Apiary is to raise the level of abstraction for accelerated application code, with security, virtualization, threaded execution, and interprocess communication provided by the hardware OS layer.

FPGA prototyping has long been an indispensable technique in pre-silicon verification as well as enabling early-stage software development. FPGAs themselves have also gained popularity as hardware accelerators deployed in datacenters. However, FPGA development brings a plethora of problems. These issues constitute a high barrier towards mass adoption of agile development surrounding FPGA-based projects.

Direct-attached accelerators, where application accelerators are directly connected to the datacenter network via a hardware network stack, offer substantial benefits in terms of reduced latency, CPU overhead, and energy use. However, a key challenge is that modern datacenter network stacks are complex, with interleaved protocol layers, network management functions, and virtualization support. To operators, network feature agility, diagnostics, and manageability are often considered just as important as raw performance. By contrast, existing hardware network stacks only support basic protocols and are often difficult to extend since they use fixed processing pipelines. We propose Beehive, a new, open-source FPGA network stack for direct-attached accelerators designed to enable flexible and adaptive construction of complex network functionality in hardware. Application and network protocol elements are modularized as tiles over a network-on-chip substrate. Elements can be added or scaled up/down to match workload characteristics with minimal effort or changes to other elements. Flexible diagnostics and control are integral, with tooling to ensure deadlock safety. Our implementation interoperates with standard Linux TCP and UDP clients, with a 4x improvement in end-to-end RPC tail latency for Linux UDP clients versus a CPU-attached accelerator. Beehive is available at https://github:com/beehive-fpga/beehive

Heterogeneous architectures and heterogeneous-ISA designs are growing areas of computer architecture and system software research. Unfortunately, this line of research is significantly hindered by the lack of experimental systems and modifiable hardware frameworks. This work proposes BYOC, a "Bring Your Own Core" framework that is specifically designed to enable heterogeneous-ISA and heterogeneous system research. BYOC is an open-source hardware framework that provides a scalable cache coherence system, that includes out-of-the-box support for four different ISAs (RISC-V 32-bit, RISC-V 64-bit, x86, and SPARCv9) and has been connected to ten different cores. The framework also supports multiple loosely coupled accelerators and is a fully working system supporting SMP Linux. The Transaction-Response Interface (TRI) introduced with BYOC has been specifically designed to make it easy to add in new cores with new ISAs and memory interfaces. This work demonstrates multiple multi-ISA designs running on FPGA and characterises the communication costs. This work describes many of the architectural design trade-offs for building such a flexible system. BYOC is well suited to be the premiere platform for heterogeneous-ISA architecture, system software, and compiler research.

Energy efficiency has become an increasingly important concern in computer architecture due to the end of Dennard scaling. Heterogeneity has been explored as a way to achieve better energy efficiency and heterogeneous microarchitecture chips have become common in the mobile setting. Recent research has explored using heterogeneous-ISA, heterogeneous microarchitecture, general-purpose cores to achieve further energy efficiency gains. However, there is no open-source hardware implementation of a heterogeneous-ISA processor available for research, and effective research on heterogeneous-ISA processors necessitates the emulation speed provided by FPGA prototyping. This work describes our experiences creating JuxtaPiton by integrating a small RISC-V core into the OpenPiton framework, which uses a modified OpenSPARC T1 core. This is the first time a new core has been integrated with the OpenPiton framework, and JuxtaPiton is the first open-source, general-purpose, heterogeneous-ISA processor. JuxtaPiton inherits all the capabilities of OpenPiton, including vital FPGA emulation infrastructure which can boot full-stack Debian Linux. Using this infrastructure, we investigate area and timing effects of using the new RISC-V core on FPGA and the performance of the new core running microbenchmarks.

The end of Dennard's scaling and the looming power wall have made power and energy primary design goals for modern processors. Further, new applications such as cloud computing and Internet of Things (IoT) continue to necessitate increased performance and energy efficiency. Manycore processors show potential in addressing some of these issues. However, there is little detailed power and energy data on manycore processors. In this work, we carefully study detailed power and energy characteristics of Piton, a 25-core modern open source academic processor, including voltage versus frequency scaling, energy per instruction (EPI), memory system energy, network-on-chip (NoC) energy, thermal characteristics, and application performance and power consumption. This is the first detailed power and energy characterization of an open source manycore design implemented in silicon. The open source nature of the processor provides increased value, enabling detailed characterization verified against simulation and the ability to correlate results with the design and register transfer level (RTL) model. Additionally, this enables other researchers to utilize this work to build new power models, devise new research directions, and perform accurate power and energy research using the open source processor. The characterization data reveals a number of interesting insights, including that operand values have a large impact on EPI, recomputing data can be more energy efficient than loading it from memory, on-chip data transmission (NoC) energy is low, and insights on energy efficient multithreaded core design. All data collected and the hardware infrastructure used is open source and available for download at http://www.openpiton.org.