Cloud applications need network data encryption to isolate from other tenants and protect their data from potential eavesdroppers in the network infrastructure. This paper presents SMT, a protocol design for emerging datacenter transport protocols, such as NDP and Homa, to integrate data encryption. SMT integrates TLS-based encryption with a message-based transport protocol that supports efficient Remote Procedure Calls (RPCs), a common workload in datacenters. This architecture enables the use of per-message record sequence number spaces in a secure session, while ensuring unique message identities to prevent replay attacks. It also enables the use of existing NIC offloads designed for TLS over TCP, while being a native transport protocol alongside TCP and UDP. We implement SMT in the Linux kernel by extending Homa/Linux and improve RPC throughput by up to 41 % and latency by up to 35 % in comparison to TLS/TCP.

Output-intensive scientific applications are highly sensitive to low storage throughput. While existing scientific application stacks are optimized for traditional High-Performance Computing (HPC) environments with high remote storage and network bandwidth, these assumptions often fail in modern settings like cloud deployment. This is because the existing scientific application I/O stack fails to leverage the available resources. At the same time, scientific applications exhibit special synchronization and data output requirements that are difficult to satisfy using traditional approaches such as block-level or filesystem-level caching. We introduce ParaLog, a distributed host-side logging approach designed to accelerate scientific applications transparently. ParaLog emphasizes deployability, enabling support for unmodified message passing interface (MPI) applications and implementations while preserving crash consistency semantics. We evaluate ParaLog across traditional HPC, cloud HPC, local clusters, and hybrid environments, demonstrating its capability to reduce end-to-end execution time by 13-26% for popular scientific applications in cloud settings.

This paper presents SDP, a protocol design for emerging datacenter transports, such as NDP and Homa, to integrate data encryption. It supports NIC offloading designed for TLS over TCP, native protocol number alongside TCP and UDP, and message-based abstraction that enables low latency RPCs with fine-grained parallelism.

Cloud providers began to provide managed services to attract scientific applications, which have been traditionally executed on supercomputers. One example is AWS FSx for Lustre, a fully managed parallel file system (PFS) released in 2018. However, due to the nature of scientific applications, the frontend storage network bandwidth is left completely idle for the majority of its lifetime. Furthermore, the pricing model does not match the scalability requirement. We propose iFast, a novel host-side caching mechanism for scientific applications that improves storage bandwidth utilization and end-to-end application performance: by overlapping compute and data writeback through inexpensive local storage. iFast supports the Massage Passing Interface (MPI) library that is widely used by scientific applications and is implemented as a preloaded library. It requires no change to applications, the MPI library, or support from cloud operators. We demonstrate how iFast can accelerate the end-to-end time of a representative scientific application Neko, by 13–40%.

The strong consistency and stateful workflow are seen as the major factors for limiting parallel I/O performance because of the need for locking and state management. While the POSIX-based I/O model dominates modern HPC storage infrastructure, emerging object storage technology can potentially improve I/O performance by eliminating these bottlenecks. Despite a wide deployment on the cloud, its adoption in HPC remains low. We argue one reason is the lack of a suitable programming interface for parallel I/O in scientific applications. In this work, we introduce NoaSci, a Numerical Object Array library for scientific applications. NoaSci supports different data formats (e.g. HDF5, binary), and focuses on supporting nodelocal burst buffers and object stores. We demonstrate for the first time how scientific applications can perform parallel I/O on Seagate’s Motr object store through NoaSci. We evaluate NoaSci’s preliminary performance using the iPIC3D space weather application and position against existing I/O methods.

Abstract In situ visualization on high-performance computing systems allows us to analyze simulation results that would otherwise be impossible, given the size of the simulation data sets and offline post-processing execution time. We develop an in situ adaptor for Paraview Catalyst and Nek5000, a massively parallel Fortran and C code for computational fluid dynamics. We perform a strong scalability test up to 2048 cores on KTH’s Beskow Cray XC40 supercomputer and assess in situ visualization’s impact on the Nek5000 performance. In our study case, a high-fidelity simulation of turbulent flow, we observe that in situ operations significantly limit the strong scalability of the code, reducing the relative parallel efficiency to only $$\approx 21\%$$ ≈ 21 % on 2048 cores (the relative efficiency of Nek5000 without in situ operations is $$\approx 99\%$$ ≈ 99 % ). Through profiling with Arm MAP, we identified a bottleneck in the image composition step (that uses the Radix-kr algorithm) where a majority of the time is spent on MPI communication. We also identified an imbalance of in situ processing time between rank 0 and all other ranks. In our case, better scaling and load-balancing in the parallel image composition would considerably improve the performance of Nek5000 with in situ capabilities. In general, the result of this study highlights the technical challenges posed by the integration of high-performance simulation codes and data-analysis libraries and their practical use in complex cases, even when efficient algorithms already exist for a certain application scenario.

One of the most promising approaches for data analysis and exploration of large data sets is Machine Learning (ML) techniques that are inspired by brain models. Such methods use alternative learning rules potentially more efficiently than established learning rules. In this work, we focus on the potential of brain-inspired ML for exploiting High-Performance Computing (HPC) resources to solve ML problems: we discuss the BCPNN and an HPC implementation, called StreamBrain, its computational cost, suitability to HPC systems. As an example, we use StreamBrain to analyze the Higgs Boson dataset from High Energy Physics and discriminate between background and signal classes in collisions of high-energy particle colliders. Overall, we reach up to 69.15% accuracy and 76.4% Area Under the Curve (AUC) performance.

Machine Learning applications on HPC systems have been gaining popularity in recent years. The upcoming large scale systems will offer tremendous parallelism for training through GPUs. However, another heavy aspect of Machine Learning is I/O, and this can potentially be a performance bottleneck. TensorFlow, one of the most popular Deep-Learning platforms, now offers a new profiler interface and allows instrumentation of TensorFlow operations. However, the current profiler only enables analysis at the TensorFlow platform level and does not provide system-level information. In this paper, we extend TensorFlow Profiler and introduce tf-Darshan, both a profiler and tracer, that performs instrumentation through Darshan. We use the same Darshan shared instrumentation library and implement a runtime attachment without using a system preload. We can extract Darshan profiling data structures during TensorFlow execution to enable analysis through the TensorFlow profiler. We visualize the performance results through TensorBoard, the web-based TensorFlow visualization tool. At the same time, we do not alter Darshan's existing implementation. We illustrate tf-Darshan by performing two case studies on ImageNet image and Malware classification. We show that by guiding optimization using data from tf-Darshan, we increase POSIX I/O bandwidth by up to 19% by selecting data for staging on fast tier storage. We also show that Darshan has the potential of being used as a runtime library for profiling and providing information for future optimization.

Large-scale simulations of plasmas are essential for advancing our understanding of fusion devices, space, and astrophysical systems. Particle-in-Cell (PIC) codes have demonstrated their success in simulating numerous plasma phenomena on HPC systems. Today, flagship supercomputers feature multiple GPUs per compute node to achieve unprecedented computing power at high power efficiency. PIC codes require new algorithm design and implementation for exploiting such accelerated platforms. In this work, we design and optimize a three-dimensional implicit PIC code, called sputniPIC, to run on a general multi-GPU compute node. We introduce a particle decomposition data layout, in contrast to domain decomposition on CPU-based implementations, to use particle batches for overlapping communication and computation on GPUs. sputniPIC also natively supports different precision representations to achieve speed up on hardware that supports reduced precision. We validate sputniPIC through the well-known GEM challenge and provide performance analysis. We test sputniPIC on three multi-GPU platforms and report a 200-800x performance improvement with respect to the sputniPIC CPU OpenMP version performance. We show that reduced precision could further improve performance by 45% to 80% on the three platforms. Because of these performance improvements, on a single node with multiple GPUs, sputniPIC enables large-scale three-dimensional PIC simulations that were only possible using clusters.

SAGE (Percipient StorAGe for Exascale Data Centric Computing) is a European Commission funded project towards the era of Exascale computing. Its goal is to design and implement a Big Data/Extreme Computing (BDEC) capable infrastructure with associated software stack. The SAGE system follows a storage centric approach as it is capable of storing and processing large data volumes at the Exascale regime.