We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

The fashion industry has been identified as a major contributor to waste and emissions, leading to an increased interest in promoting the second-hand market. Machine learning methods play an important role in facilitating the creation and expansion of second-hand marketplaces by enabling the large-scale valuation of used garments. We contribute to this line of work by addressing the scalability of second-hand image retrieval from databases. By introducing a selective representation framework, we can shrink databases to 10% of their original size without sacrificing retrieval accuracy. We first explore clustering and coreset selection methods to identify representative samples that capture the key features of each garment and its internal variability. Then, we introduce an efficient outlier removal method, based on a neighbour-homogeneity consistency score measure, that filters out uncharacteristic samples prior to selection. We evaluate our approach on three public datasets: DeepFashion Attribute, DeepFashion Con2Shop, and DeepFashion2. The results demonstrate a clear performance-efficiency trade-off by strategically pruning and selecting representative vectors of images. The retrieval system maintains near-optimal accuracy, while greatly reducing computational costs by reducing the images added to the vector database. Furthermore, applying our outlier removal method to clustering techniques yields even higher retrieval performance by removing non-discriminative samples before the selection.

Estimating Mutual Information (MI), a key measure of dependence of random quantities without specific modeling assumptions, is a challenging problem in high dimensions. We propose a novel mutual information estimator based on parametrizing conditional densities using normalizing flows, a deep generative model that has gained popularity in recent years. This estimator leverages a block autoregressive structure to achieve improved bias-variance trade-offs on standard benchmark tasks.

A realistic channel model is vital for designing, optimizing, and evaluating unmanned aerial vehicle (UAV)-to-ground (U2G) communication systems. This paper presents a comprehensive U2G ultra-wideband (UWB) channel model by considering the large-scale fading (LSF), including path loss (PL), shadow fading (SF), and airframe shadowing (AS). The effects of carrier frequency, bandwidth, building distribution, and UAV airframe structure on the LSF are fully studied. Different from the traditional bandwidth-independent PL calculation method, an extended closed-form expression for calculating PL is proposed to capture the new characteristics of ultra-wide bandwidth. The SF part is statistically described by a parametric lognormal model, and the built-up scenario-dependent parameters are predicted by a hybrid method with the ray-tracing and virtual scenario technologies. In addition, the AS part with respect to the airframe structure and posture variation is derived. It consists of the direct and reflected path components which are obtained by the deterministic and statistical approaches, respectively. The numerical simulations show that bandwidth, building distribution, and airframe structure have great influence on the LSF characteristics. For example, the fluctuation of received power can reach 30 dB due to the AS. The proposed model also shows its effectiveness and reliability by comparing with the RT and measured data, as well as the good compatibility with standardized models for some typical scenarios.

This paper proposes a general unmanned aerial vehicle (UAV)-to-ground (U2G) channel model. The proposed model is consistent with real scenarios by considering the impacts of flight altitude and UAV posture on channel gain. Machine learning and ray tracing (RT) techniques are employed to improve the generation method of altitude-dependent parameters, i.e., path loss (PL) and shadow fading (SF). In addition, posture-related fuselage shadowing coefficient (FSC) is introduced to modify the channel gain, and three-dimensional (3D) geometry modeling of the fuselage is conducted to calculate the FSC. Numerical simulation results show that the flight altitude and UAV posture have obvious effects on channel gain. The proposed model with modified channel gain can effectively describe the PL, SF, and received power under fuselage shadowing. The validity and advantage of the improved channel gain are verified by comparing the simulation results with the measured ones.

Unmanned aerial vehicle (UAV)-to-ground (U2G) channel models play a pivotal role in reliable communications between UAV and ground terminal. This paper proposes a three-dimensional (3D) non-stationary hybrid model including large-scale and small-scale fading for U2G multiple-input-multiple-output (MIMO) channels. Distinctive channel characteristics under U2G scenarios, i.e., 3D trajectory and posture of UAV, fuselage scattering effect (FSE), and posture variation fading (PVF) are incorporated into the proposed model. The channel parameters, i.e., path loss (PL), shadow fading (SF), path delay, and path angle, are generated incorporating machine learning (ML) and ray tracing (RT) techniques to capture the structure-related characteristics. In order to guarantee the physical continuity of channel parameters such as Doppler phase and path power, the time evolution methods of inter- and intra- stationary intervals are proposed. Key statistical properties, including temporal auto-correction function (ACF), power delay profile (PDP), level crossing rate (LCR), average fading duration (AFD), and stationary interval (SI), are analyzed with the impact of the change of fuselage and posture variation. It is demonstrated that both posture variation and fuselage scattering have crucial effects on channel characteristics. The validity and practicability of the proposed model are verified by comparing the simulation results with the measured ones.