International audience

This paper quantifies the weight of the different physical mechanisms (reflection, diffraction, and scattering) in a typical indoor THz wireless communication environment and provides an intercomparison of raytracing tools. Two state-of-the-art raytracing tools – Wireless InSite and Sionna – are utilized to analyze the capabilities of currently available open-source and commercial raytracing engines for THz simulations. A channel sounder measurement campaign at 300 GHz was conducted in a conference room at Fraunhofer HHI, which is used to validate the raytracing simulations. Additionally, the measurements are compared to a proprietary raytracer, optimized for THz simulations. This paper presents a guideline to increase the capabilities of state-of-the-art raytracing tools, to obtain good results for high frequency simulations. The comparisons show, that currently used raytracing tools are not sufficiently accurate for THz simulations. However, these inaccuracies can be mitigated by the implementation of new features, such as the inclusion of different scattering mechanisms and the incorporation of atmospheric attenuation, while utilizing precise geometry and accurate material parameter models.

The modeling of radio links plays a crucial role in achieving mission success of unmanned aerial vehicles (UAVs). By simulating and analyzing communication performance, operators can anticipate and address potential challenges. In this paper, we propose a full-featured UAV software-in-the-loop digital twin (SITL-DT) for a heavy-lifting hexacopter that integrates a radio link module based on an experimental path loss model for ‘Open’ category Visual Line of Sight (VLOS) conditions and drone-antenna radiation diagrams obtained via electromagnetic simulation. The main purpose of integrating and simulating a radio link is to characterize when the communication link can be conflicting due to distance, the attitude of the aircraft relative to the pilot, and other phenomena. The system architecture, including the communications module, is implemented and validated based upon experimental flight data.

Abstract In order to provide interactive capabilities within the context of Internet of Thing (IoT) applications, wireless communication systems play a key role, owing to in-herent mobility, ubiquity and ease of deployment. However, to comply with Quality of Service (QoS) and Quality of Experience (QoE) metrics, coverage/capacity analysis must be performed, to account for the impact of signal blockage as well as multiple interference sources. This analysis is especially complex in the case of indoor scenarios, such as those derived from Industrial Internet of Things (IIoT). In this work, a fully volumetric approach based on hybrid deterministic 3D Ray Launching is employed providing precise wireless channel characterization and hence, system level analysis of indoor scenarios. Coverage/capacity, interference mapping and time domain characterization estimations will be derived, considering different frequencies of operation below 6 GHz. The proposed methodology will be tested against a real measurement scenario, providing full flexibility and scalability for adoption in a wide range of IIoT capable environments.

In this work, Vehicle-to-everything (V2X) wireless communications performance is analyzed, in order to account for inherent scenario complexity, in the deployment phase of wireless systems towards the implementation of a Context Aware environment. An urban environment has been simulated by means of an in-house three-dimensional (3D) Ray Launching algorithm, coupled with a microscopic vehicular movement simulator, accounting for embedded urban elements as well as variable traffic densities within the complex environment. Large-scale and small-scale results are presented, as well as statistical analysis of the impact of different traffic densities. A campaign of measurements in the same real scenario has been performed, showing good agreement with wireless channel estimations for the considered frequency. These results can aid in V2X deployment configurations in urban environments, in order to minimize power consumption, optimize interference levels and increase overall system performance.