Autonomous vehicles (AVs) are becoming integral to on-demand micro transit, offering the potential for safer, efficient, and sustainable transportation. However, AV deployment faces several challenges, including the lack of suitable roadways, varying travel conditions. Traditional routers prioritize speed and not reliability, leading to unpredictable operations and complications in planning. To address these, we introduce AVATAR, an autonomy-aware routing framework that prioritizes dependable, low-variance routes. Our approach encodes multiple objectives including road speed, speed variability, zoning areas, pedestrian encounters, and operator preferred roadways into edge-level routing engines. Objective optimized routes are generated, then scored using a multi-criteria decision-making process. User-configurable preference profiles, allow operators to define a balance between reliability and speed. AVATAR is a data-driven framework that supports both real-time AV operations and offline analysis, enabling transit operators to assess and refine routing strategies. Our experiments using real-world data from Silicon Valley, California, and Yokohama, Japan show that our approach significantly improves AV reliability and performance and advances the sustainable and scalable integration of AVs into future transportation networks.

Effective traffic incident management is critical for road safety and operational efficiency. Yet, many transportation agencies rely on reactionary methods, where incidents are reported by human agents and managed through rule-based frameworks like traditional Traffic Incident Management (TIM) systems. However, these are vulnerable to human error, oversight, and delays during high-stress conditions. Although recent initiatives incorporating real-time sensor data for corridor monitoring and enhanced roadway information systems represent strides toward modernization, these systems often still require substantial human intervention. Recent advancements in graph-based deep learning models offer promising potential for addressing the limitations of traditional methods. While state-of-the-art models exist, the complexities of incident localization within dynamic and interconnected road networks, along with limited availability of high-quality labeled data and variability in real-time traffic measurements, are still open challenges. To address these, we propose the Traffic Response Anomaly Capture Engine (TRACE), a novel approach that combines graph neural networks, transformers, and probabilistic normalizing flows to accurately detect and localize traffic anomalies in real time. TRACE captures spatial-temporal dependencies, manages data uncertainty, and enhances automation, supporting more precise and timely incident localization. Our approach is validated on real-world traffic data and improved incident localization by 0.6 miles (17%) than SOTA methods while maintaining similar incident detection accuracy and mean detection delay.

Public bus transit systems provide critical transportation services for large sections of modern communities. On-time performance and maintaining the reliable quality of service is therefore very important. Unfortunately, disruptions caused by overcrowding, vehicular failures, and road accidents often lead to service performance degradation. Though transit agencies keep a limited number of vehicles in reserve and dispatch them to relieve the affected routes during disruptions, the procedure is often ad-hoc and has to rely on human experience and intuition to allocate resources (vehicles) to affected trips under uncertainty. In this article, we describe a principled approach using non-myopic sequential decision procedures to solve the problem and decide (a) if it is advantageous to anticipate problems and proactively station transit buses near areas with high-likelihood of disruptions and (b) decide if and which vehicle to dispatch to a particular problem. Our approach was developed in partnership WeGo Public Transit, a public transportation agency based in Nashville, Tennessee and models the system as a semi-Markov decision problem (solved as a Monte-Carlo tree search procedure) and shows that it is possible to obtain an answer to these two coupled decision problems in a way that maximizes the overall reward (number of people served). We sample many possible futures from generative models; each is assigned to a tree and processed using root parallelization. We validate our approach with both real-world and scaled-up data from two agencies in Tennessee. Our experiments show that the proposed framework serves 2% more passengers while reducing deadhead miles by 40%. Finally, we introduce Vectura, a dashboard providing transit dispatchers a complete view of the transit system at a glance along with access to our developed tools.

Public transit systems are paramount in lowering carbon emissions and reducing urban congestion for environmental sustainability. However, overcrowding has adverse effects on the quality of service, passenger experience, and overall efficiency of public transit causing a decline in the usage of public transit systems. Therefore, it is crucial to identify and forecast potential windows of overcrowding to improve passenger experience and encourage higher ridership. Predicting ridership is a complex task, due to the inherent noise of collected data and the sparsity of overcrowding events. Existing studies in predicting public transit ridership consider only a static depiction of bus networks. We address these issues by first applying a data processing pipeline that cleans noisy data and engineers several features for training. Then, we address sparsity by converting the network to a dynamic graph and using a graph convolutional network, incorporating temporal, spatial, and auto-regressive features, to learn generalizable patterns for each route. Finally, since conventional loss functions like categorical cross-entropy have limitations in addressing class imbalance inherent in ridership data, our proposed approach uses focal loss to refine the prediction focus on less frequent yet task-critical overcrowding instances. Our experiments, using real-world data from our partner agency, show that the proposed approach outperforms existing state-of-the-art baselines in terms of accuracy and robustness.

The increasing popularity of electronic vehicles has spurred a demand for EV charging infrastructure. In the United States alone, over 160,000 public and private charging ports have been installed. This has stoked fear of potential grid issues in the future. Meanwhile, companies, specifically building owners are also seeing the opportunity to leverage EV batteries as energy stores to serve as buffers against the electric grid. The main idea is to influence and control charging behavior to provide a certain level of energy resiliency and demand responsiveness to the building from grid events while ensuring that they meet the demands of EV users. However, managing and co-optimizing energy requirements of EVs and cost-saving measures of building owners is a difficult task. First, user behavior and grid uncertainty contribute greatly to the potential effectiveness of different policies. Second, different charger configurations can have drastically different effects on the cost. Therefore, we propose a complete end-to-end discrete event simulator for vehicle-to-building charging optimization. This software is aimed at building owners and EV manufacturers such as Nissan, looking to deploy their charging stations with state-of-the-art optimization algorithms. We provide a complete solution that allows the owners to train, evaluate, introduce uncertainty, and benchmark policies on their datasets. Lastly, we discuss the potential for extending our work with other vehicle-to-grid deployments.

Modern smart cities need smart transportation solutions to quickly detect various traffic emergencies and incidents in the city to avoid cascading traffic disruptions. To materialize this, roadside units and ambient transportation sensors are being deployed to collect speed data that enables the monitoring of traffic conditions on each road segment. In this article, we first propose a scalable data-driven anomaly-based traffic incident detection framework for a city-scale smart transportation system. Specifically, we propose an incremental region growing approximation algorithm for optimal Spatio-temporal clustering of road segments and their data; such that road segments are strategically divided into highly correlated clusters. The highly correlated clusters enable identifying a Pythagorean Mean-based invariant as an anomaly detection metric that is highly stable under no incidents but shows a deviation in the presence of incidents. We learn the bounds of the invariants in a robust manner such that anomaly detection can generalize to unseen events, even when learning from real noisy data. Second, using cluster-level detection, we propose a folded Gaussian classifier to pinpoint the particular segment in a cluster where the incident happened in an automated manner. We perform extensive experimental validation using mobility data collected from four cities in Tennessee and compare with the state-of-the-art ML methods to prove that our method can detect incidents within each cluster in real-time and outperforms known ML methods.

Public transit is a vital mode of transportation in urban areas, and its efficiency is crucial for the daily commute of millions of people. To improve the reliability and predictability of transit systems, researchers have developed separate single-task learning models to predict the occupancy and delay of buses at the stop or route level. However, these models provide a narrow view of delay and occupancy at each stop and do not account for the correlation between the two. We propose a novel approach that leverages broader generalizable patterns governing delay and occupancy for improved prediction. We introduce a multitask learning toolchain that takes into account General Transit Feed Specification feeds, Automatic Passenger Counter data, and contextual temporal and spatial information. The toolchain predicts transit delay and occupancy at the stop level, improving the accuracy of the predictions of these two features of a trip given sparse and noisy data. We also show that our toolchain can adapt to fewer samples of new transit data once it has been trained on previous routes/trips as compared to state-of-the-art methods. Finally, we use actual data from Chattanooga, Tennessee, to validate our approach. We compare our approach against the state-of-the-art methods and we show that treating occupancy and delay as related problems improves the accuracy of the predictions. We show that our approach improves delay prediction significantly by as much as 4% in F1 scores while producing equivalent or better results for occupancy.

Route Planning Systems (RPS) are a core component of autonomous personal transport systems essential for safe and efficient navigation of dynamic urban environments with the support of edge-based smart city infrastructure, but they also raise concerns about user route privacy in the context of both privately owned and commercial vehicles. Numerous high-profile data breaches in recent years have fortunately motivated research on privacy-preserving RPS, but most of them are rendered impractical by greatly increased communication and processing overhead. We address this by proposing an approach called Hierarchical Privacy-Preserving Route Planning (HPRoP), which divides and distributes the route-planning task across multiple levels and protects locations along the entire route. This is done by combining Inertial Flow partitioning, Private Information Retrieval (PIR), and Edge Computing techniques with our novel route-planning heuristic algorithm. Normalized metrics were also formulated to quantify the privacy of the source/destination points ( endpoint location privacy ) and the route itself ( route privacy ). Evaluation on a simulated road network showed that HPRoP reliably produces routes differing only by ≤ 20% in length from optimal shortest paths, with completion times within ∼ 25 seconds, which is reasonable for a PIR-based approach. On top of this, more than half of the produced routes achieved near-optimal endpoint location privacy (∼ 1.0) and good route privacy (≥ 0.8).

The ability to accurately predict public transit ridership demand benefits passengers and transit agencies. Agencies will be able to reallocate buses to handle under or over-utilized bus routes, improving resource utilization, and passengers will be able to adjust and plan their schedules to avoid overcrowded buses and maintain a certain level of comfort. However, accurately predicting occupancy is a non-trivial task. Various reasons such as heterogeneity, evolving ridership patterns, exogenous events like weather, and other stochastic variables, make the task much more challenging. With the progress of big data, transit authorities now have access to real-time passenger occupancy information for their vehicles. The amount of data generated is staggering. While there is no shortage in data, it must still be cleaned, processed, augmented, and merged before any useful information can be generated. In this paper, we propose the use and fusion of data from multiple sources, cleaned, processed, and merged together, for use in training machine learning models to predict transit ridership. We use data that spans a 2-year period (2020-2022) incorporating transit, weather, traffic, and calendar data. The resulting data, which equates to 17 million observations, is used to train separate models for the trip and stop level prediction. We evaluate our approach on real-world transit data provided by the public transit agency of Nashville, TN. We demonstrate that the trip level model based on Xgboost and the stop level model based on LSTM outperform the baseline statistical model across the entire transit service day.

The realization of edge-based cyber-physical systems (CPS) poses important challenges in terms of performance, robustness, security, etc. This paper examines a novel approach to providing a user-centric adaptive route planning service over a network of Road Side Units (RSUs) in smart cities. The key idea is to adaptively select routing task parameters such as privacy-cloaked area sizes and number of retained intersections to balance processing time, privacy protection level, and route accuracy for privacy-augmented distributed route search while also handling per-query user preferences. This is formulated as an optimization problem with a set of parameters giving the best result for a set of queries given system constraints. Processing Throughput, Privacy Protection, and Travel Time Accuracy were developed as the objective functions to be balanced. A Multi-Objective Genetic Algorithm based technique (NSGA-II) is applied to recover a feasible solution. The performance of this approach was then evaluated using traffic data from Osaka, Japan. Results show good performance of the approach in balancing the aforementioned objectives based on user preferences.

Recent advancements in cloud computing have driven rapid development in data-intensive smart city applications by providing near real time processing and storage scalability. This has resulted in efficient centralized route planning services such as Google Maps, upon which millions of users rely. Route planning algorithms have progressed in line with the cloud environments in which they run. Current state of the art solutions assume a shared memory model, hence deployment is limited to multiprocessing environments in data centers. By centralizing these services, latency has become the limiting parameter in the technologies of the future, such as autonomous cars. Additionally, these services require access to outside networks, raising availability concerns in disaster scenarios. Therefore, this paper provides a decentralized route planning approach for private fog networks. We leverage recent advances in federated learning to collaboratively learn shared prediction models online and investigate our approach with a simulated case study from a mid-size U.S. city.

Edge and Fog computing paradigms are used to process big data generated by the increasing number of IoT devices. These paradigms have enabled cities to become smarter in various aspects via real-time data-driven applications. While these have addressed some flaws of cloud computing some challenges remain particularly in terms of privacy and security. We create a testbed based on a distributed processing platform called the Information flow of Things (IFoT) middleware. We briefly describe a decentralized traffic speed query and routing service implemented on this framework testbed. We configure the testbed to test countermeasure systems that aim to address the security challenges faced by prior paradigms. Using this testbed, we investigate a novel decentralized anomaly detection approach for time-sensitive distributed smart transportation systems.

Information and communication technologies (ICTs) has enabled growth in developed countries and urban cities through improvements in communication systems, devices and applications. In rural areas, especially in developing countries, ICT penetration is not as high, often due to lack of available infrastructure and funding. With the increasing availability of Internet-of-Things (IoT) devices, low-cost large-scale deployments have become possible even in rural areas. We design, develop and implement, Near Cloud, a cloud-less platform that allows users and IoT devices to communicate and share information. This is built on top of a wireless mesh network (WMN) of low-cost, low-power IoT devices and deployed in areas where there is little to no Internet connectivity. To inject ICT and help bridge the digital divide in rural areas, Near Cloud provides functionalities such as web servers on nodes, accessibility to all users via Wi-Fi, and various data processing including image processing and machine learning. We will show applicability of Near Cloud in improving rural education, health care facilities, disaster response and agriculture.