In the era of Industry 4.0, precise indoor localization is vital for automation and efficiency in smart factories. Reconfigurable Intelligent Surfaces (RIS) are emerging as key enablers in 6G networks for joint sensing and communication. However, RIS faces significant challenges in Non-Line-of-Sight (NLOS) and multipath propagation, particularly in localization scenarios, where detecting NLOS conditions is crucial for ensuring not only reliable results and increased connectivity but also smart factory personnel's safety. This study introduces an AI-assisted framework employing a Convolutional Neural Network (CNN) customized for accurate Line-of-Sight (LOS) and NLOS classification to enhance RIS-based localization using measured, synthetic, mixedmeasured, and mixed-synthetic experimental data, that is, original, augmented, slightly noisy, and highly noisy data, respectively. Validated through such data from three different environments, the proposed customized-CNN (cCNN) model achieves$\mathbf{9 5. 0 \% - 9 9. 0 \%}$accuracy, outperforming standard pre-trained models like Visual Geometry Group 16 (VGG-16) with an accuracy of$\mathbf{8 5. 5 \% - 8 8. 0 \%}$. By addressing RIS limitations in NLOS scenarios, this framework offers scalable and highprecision localization solutions for 6G-enabled smart factories.

This paper presents a theoretical and mathematical framework for the design of a conformal reconfigurable intelligent surface (RIS) that adapts to non-planar geometries, which is a critical advancement for the deployment of RIS on non-planar and irregular surfaces as envisioned in smart radio environments. Previous research focused mainly on the optimization of RISs assuming a predetermined shape, while neglecting the intricate interplay between shape optimization, phase optimization, and mutual coupling effects. Our contribution, the Tailored 3D RIS (T3DRIS) framework, addresses this fundamental problem by integrating the configuration and shape optimization of RISs into a unified model and design framework, thus facilitating the application of RIS technology to a wider spectrum of environmental objects. The mathematical core of T3DRIS is rooted in optimizing the 3D deployment of the unit cells and tuning circuits, aiming at maximizing the communication performance. Through rigorous full-wave simulations and a comprehensive set of numerical analyses, we validate the proposed approach and demonstrate its superior performance and applicability over contemporary designs. This study—the first of its kind—paves the way for a new direction in RIS research, emphasizing the importance of a theoretical and mathematical perspective in tackling the challenges of conformal RISs.

Reconfigurable Intelligent Surfaces (RISs) are expected to be massively deployed in future beyond-5th generation wireless networks, thanks to their ability to programmatically alter the propagation environment, inherent low-cost and low-maintenance nature. Indeed, they are envisioned to be implemented on the facades of buildings or on moving objects. However, such an innovative characteristic may potentially turn into an involuntary negative behavior that needs to be addressed: an undesired signal scattering. In particular, RIS elements may be prone to experience failures due to lack of proper maintenance or external environmental factors. While the resulting Signal-to-Noise-Ratio (SNR) at the intended User Equipment (UE) may not be significantly degraded, we demonstrate the potential risks in terms of unwanted spreading of the transmit signal to non-intended UEs. In this regard, we consider the problem of mitigating such undesired effectby proposing two simple yet effective algorithms, which are based on maximizing the Signal-to-Leakage-and-Noise-Ratio (SLNR) over a predefined two-dimensional (2D) area and are applicable in the case of perfect channel-state-information (CSI) and partial CSI, respectively. Numerical and full-wave simulations demonstrate the added gains compared to leakage-unaware and reference schemes.

In this poster, we present the Reconfigurable Intelligent Surface (RIS) that we designed, built, and tested. At first, the RIS technology is briefly discussed, subsequently, our prototype details are explained, and finally, we conclude by showing the obtained test results. Our RIS design comprises arrays of patch antennas, delay lines, and programmable radio-frequency (RF) switches that enable almost-passive 3D beamforming, i.e., without active RF components.

This paper tackles the problem of downlink data transmission in massive multiple-input multiple-output (MIMO) systems where user equipments (UEs) exhibit high spatial correlation and channel estimation is limited by strong pilot contamination. Signal subspace separation among UEs is, in fact, rarely realized in practice and is generally beyond the control of the network designer (as it is dictated by the physical scattering environment). In this context, we propose a novel statistical beamforming technique, referred to asMIMO covariance shaping, that exploits multiple antennas at the UEs and leverages the realistic non-Kronecker structure of massive MIMO channels to target a suitable shaping of the channel statistics performed at the UE-side. To optimize the covariance shaping strategies, we propose a low-complexity block coordinate descent algorithm that is proved to converge to a limit point of the original nonconvex problem. For the two-UE case, this is shown to converge to a stationary point of the original problem. Numerical results illustrate the sum-rate performance gains of the proposed method with respect to spatial multiplexing in scenarios where the spatial selectivity of the base station is not sufficient to separate closely spaced UEs.

Massive access for Internet-of-Things (IoT) in beyond 5G networks represents a daunting challenge for conventional bandwidth-limited technologies. Millimeter-wave technologies (mmWave)-which provide large chunks of bandwidth at the cost of more complex wireless processors in harsher radio environments-is a promising alternative to accommodate massive IoT but its cost and power requirements are an obstacle for wide adoption in practice. In this context, meta-materials arise as a key innovation enabler to address this challenge by Re-configurable Intelligent Surfaces (RISs). In this article we take on the challenge and study a beyond 5G scenario consisting of a multi-antenna base station (BS) serving a large set of single-antenna user equipments (UEs) with the aid of RISs to cope with non-line-of-sight paths. Specifically, we build a mathematical framework to jointly optimize the precoding strategy of the BS and the RIS parameters in order to minimize the system sum mean squared error (SMSE). This novel approach reveals convenient properties used to design two algorithms, RISMA and Lo- RISMA, which are able to either find simple and efficient solutions to our problem (the former) or accommodate practical constraints with low-resolution RISs (the latter). Numerical results show that our algorithms outperform conventional benchmarks that do not employ RIS (even with low-resolution meta-surfaces) with gains that span from 20% to 120% in sum rate performance.

Multicast services, whereby a common valuable message needs to reach a whole population of user equipments (UEs), are gaining attention on account of new applications such as vehicular networks. As it proves challenging to guarantee decodability by every UE in a large population, service reliability is indeed the Achilles' heel of multicast transmissions. To circumvent this problem, a two-phase protocol capitalizing on device-to-device (D2D) links between UEs has been proposed, which overcomes the vanishing behavior of the multicast rate. In this paper, we revisit such a D2D-aided protocol in the new light of precoding capabilities at the base station (BS). We obtain an enhanced scheme that aims at selecting a subset of UEs who cooperate to spread the common message across the rest of the network via D2D retransmissions. With the objective of maximizing the multicast rate under some outage constraint, we propose an algorithm with provable convergence that jointly identifies the most pertinent relaying UEs and optimizes the precoding strategy at the BS.

The low-rank behavior of massive multiple-input multiple-output (MIMO) channel covariance matrices and its exploitation for pilot decontamination and statistical beamforming are well documented. Existing algorithms, however, rely on signal subspace separation among user equipments (UEs) and, as such, they tend to fail when the distance between UEs becomes small. This paper proposes a solution to this problem via covariance shaping at the UE-side in the case where the UEs are equipped with (a small number of) multiple antennas. The key resides in: i) exploiting general non-Kronecker MIMO channel structures that allow the transmitter to suitably alter the channel statistics perceived by the base station, and ii) sacrificing some spatial degrees of freedom at each UE so as to improve the statistical orthogonality between closely spaced UEs. Numerical results illustrate the sum-rate performance gains of the proposed covariance shaping method with respect to existing ones.