This paper investigates movable antenna (MA) empowered secure transmission in near-field multiple-input multiple-output (MIMO) communication systems, where the base station (BS) equipped with an MA array transmits confidential information to a legitimate user under the threat of a potential eavesdropper. To enhance physical layer security (PLS) of the considered system, we aim to maximize the secrecy rate by jointly designing the hybrid digital and analog beamformers, as well as the positions of MAs at the BS. To solve the formulated non-convex problem with highly coupled variables, an alternating optimization (AO)-based algorithm is introduced by decoupling the original problem into two separate subproblems. Specifically, for the subproblem of designing hybrid beamformers, a semi-closed-form solution for the fully-digital beamformer is first derived by a weighted minimum mean-square error (WMMSE)-based algorithm. Subsequently, the digital and analog beamformers are determined by approximating the fully-digital beamformer through the manifold optimization (MO) technique. For the MA positions design subproblem, we utilize the majorization-minimization (MM) algorithm to iteratively optimize each MA’s position while keeping others fixed. Extensive simulation results validate the considerable benefits of the proposed MA-aided near-field beam focusing approach in enhancing security performance compared to the traditional far-field and/or the fixed position antenna (FPA)-based systems. In addition, the proposed scheme can realize secure transmission even if the eavesdropper is located in the same direction as the user and closer to the BS.

Integrated sensing and communication (ISAC) systems have the issue of secrecy leakage when using the ISAC waveforms for sensing, thus posing a potential risk for eavesdropping. To address this problem, we propose to employ movable antennas (MAs) and reconfigurable intelligent surface (RIS) to enhance the physical layer security (PLS) performance of ISAC systems, where an eavesdropping target potentially wiretaps the signals transmitted by the base station (BS). To evaluate the synergistic performance gain provided by MAs and RIS, we formulate an optimization problem for maximizing the sum-rate of the users by jointly optimizing the transmit/receive beamformers of the BS, the reflection coefficients of the RIS, and the positions of MAs at communication users, subject to a minimum communication rate requirement for each user, a minimum radar sensing requirement, and a maximum secrecy leakage to the eavesdropping target. To solve this non-convex problem with highly coupled variables, a two-layer penalty-based algorithm is developed by updating the penalty parameter in the outer-layer iterations to achieve a trade-off between the optimality and feasibility of the solution. In the inner-layer iterations, the auxiliary variables are first obtained with semi-closed-form solutions using Lagrange duality. Then, the receive beamformer filter at the BS is optimized by solving a Rayleigh-quotient subproblem. Subsequently, the transmit beamformer matrix is obtained by solving a convex subproblem. Finally, the majorization-minimization (MM) algorithm is employed to optimize the RIS reflection coefficients and the positions of MAs. Extensive simulation results validate the considerable benefits of the proposed MAs-aided RIS-ISAC systems in enhancing security performance compared to traditional fixed position antenna (FPA)-based systems.

Due to the inherent characteristics of system extensibility and implementation flexibility, unmanned aerial vehicle (UAV)-assisted data aggregations will play an essential role in Internet of Things (IoT) networks, where both communication security and timeliness are of high priority. In this paper, we study uplink data aggregation in cooperative jamming-aided large-scale UAV-IoT networks under the threat of eavesdroppers. By employing stochastic geometry, we derive performance metrics related to the age of information (AoI) and secrecy outage probability (SOP) in a system-level manner, and formulate the combat between legitimate entities (i.e., IoT devices and cooperative jammers) and eavesdroppers as a two-stage Stackelberg game. To solve the formulated game, the backward induction method is utilized to obtain the Stackelberg equilibrium (SE) iteratively. Specifically, we first obtain the minimum detection error probability for the eavesdropper by optimizing its detection threshold using the successive convex approximation (SCA) technique. Subsequently, the minimization of AoI violation probability and SOP for the legitimate entity is achieved using the proposed tighter α branch and bound (T-αBB) method by jointly optimizing the transmit powers of the typical IoT device and cooperative jammers as well as the deployment altitude of the typical UAV. Extensive numerical results demonstrate that the proposed solution converges rapidly, with the timeliness and secrecy metrics decreasing by 25.1%, 33.1%, 35.9%, and 37.6% compared to the benchmark scheme in suburban, urban, dense urban, and high-rise urban environments, respectively.

Unmanned aerial vehicles (UAVs)-assisted wireless communication will play an important role in the next-generation mobile communication network. However, the inherent open nature of the signal propagation environment may cause illegal eavesdropping and surveillance from adversaries. In addition, the intergroup co-channel interference among different cells further degrades the system performance. Hence, we consider a generic scenario of multiple UAV base stations (UAV-BSs) and ground users, where multiple terrestrial wardens attempt to detect the transmissions from UAV-BSs to users and a UAV-mounted jammer is employed to generate artificial noise to assist the covert communications. To ensure fairness, we formulate an optimization problem to maximize the minimum of the average rate lower bounds of all users by jointly optimizing user association, bandwidth allocation, UAV transmit power control, and UAV 3-D deployment, subject to the constraints of the detection error probability of each warden. To solve this mixed-integer nonconvex problem, we propose a suboptimal algorithm by applying block coordinate descent (BCD) method to solve three subproblems iteratively. Specifically, in each iteration, the subproblem of user association and bandwidth allocation is solved by a customized genetic algorithm (GA) first, where a closed-form expression for bandwidth allocation is obtained. Second, the subproblem of UAV transmit power control is solved by using successive convex approximation (SCA) techniques. Finally, suboptimal 3-D positions of the UAVs are obtained through particle swarm optimization (PSO)-based algorithm. Extensive simulation results demonstrate the effectiveness and superiority of our proposed algorithm compared to benchmark schemes in terms of improving the minimum of the average rate lower bounds of all users.

Movable antenna (MA) is a new technology with great potential to improve communication performance by enabling local movement of antennas for pursuing better channel conditions. In particular, the acquisition of complete channel state information (CSI) between the transmitter (Tx) and receiver (Rx) regions is an essential problem for MA systems to reap performance gains. In this paper, we propose a general channel estimation framework for MA systems by exploiting the multi-path field response channel structure. Specifically, the angles of departure (AoDs), angles of arrival (AoAs), and complex coefficients of the multi-path components (MPCs) are jointly estimated by employing the compressed sensing method, based on multiple channel measurements at designated positions of the Tx-MA and Rx-MA. Under this framework, the Tx-MA and Rx-MA measurement positions fundamentally determine the measurement matrix for compressed sensing, of which the mutual coherence is analyzed from the perspective of Fourier transform. Moreover, two criteria for MA measurement positions are provided to guarantee the successful recovery of MPCs. Then, we propose several MA measurement position setups and compare their performance. Finally, comprehensive simulation results show that the proposed framework is able to estimate the complete CSI between the Tx and Rx regions with a high accuracy.

We deploy an unmanned aerial vehicle (UAV) equipped with a large-scale uniform planar array (UPA) to serve multiple ground users in millimeter-wave band. Particularly, the practical UAV jitter is carefully considered, which may affect the beam gains and impact the communication quality. To provide a stable service, we first model the attitude change of the UPA caused by UAV jitter. Then, an optimization problem is formulated to maximize the minimum achievable rate of the users by optimizing the position and robust hybrid beamforming of the UAV. To solve the non-convex problem with highly coupled variables, a two-stage optimization strategy is developed. The first stage aims to decouple the beamforming from the original problem and design the UAV deployment under the assumption of an ideal beam pattern. The second stage aims to design robust hybrid beamforming with the obtained UAV position. Specifically, we first design analog beamforming for wide beams to cover the potential jitter angle range for each user via a chirp sequence-inspired method. Then, with equivalent channel estimation, we design digital beamforming by combining zero-forcing and water-filling power allocation algorithms. Extensive simulation results show the performance superiority of the proposed solution compared to the benchmark algorithms.

Due to the advantage of achieving scalable connectivity and low-latency communications, air-ground integrated mesh networks (AGIMNs) will play an important role in the next generation wireless communication systems. However, due to the heterogeneous character of AGIMNs, it is challenging to manage the network and optimize the communication resources for improving the end-to-end (E2E) performance. Therefore, in this paper, we study a joint routing and time-frequency resource scheduling problem aiming at minimizing the total weighted E2E delay for heterogeneous AGIMNs. To capture the features of this complex system, we mathematically model the network constraints and formulate an optimization problem. To solve the original nonconvex problem, a suboptimal solution is proposed. First, we propose an optimal minimum-weight routing method, in which the hop count, conflict delay, and contention delay are taken into consideration. Then, we transform the time-frequency resource scheduling subproblem into a series of tractable problems for maximizing the number of active links through channel assignment in successive time slots. Finally, the successive convex approximation (SCA) technique is utilized to solve the channel assignment problem per time slot. Extensive simulation results show the performance superiority of the proposed solution compared to the benchmarks in terms of the total E2E delay.

As the commercial launch of the fifth-generation (5G) wireless communications gets near, the trend from the Internet of Things (IoT) to the Internet of Everything (IoE) is emerging. Due to the advantages of the high mobility, high Line-of-Sight (LoS) probability and low labor cost, unmanned aerial vehicles (UAVs) may play an important role in the future IoT communication networks, e.g., data collection in remote areas. In this article, we study the 3-D placement and resource allocation of multiple UAV-mounted base stations (BSs) in an uplink IoT network, where the balanced task for the UAV-BSs, the limited channel resource, and the signal interference are taken into consideration. In the considered system, the total transmission power of IoT devices is minimized, subject to a signal-to-interference-and-noise ratio (SINR) threshold for each device. First, aiming to balance the task of each UAV, we propose a clustering algorithm based on an improved$K$-means method to divide IoT devices into several groups so that the number of devices in each group is roughly the same. Then, based on matching theory, a modified-Hungarian-based dynamic many–many matching (HD4M) algorithm is designed for assigning subchannels to IoT devices, which can efficiently mitigate the interference. Finally, we jointly optimize the transmission power of IoT devices and the altitudes of UAVs via an alternating iterative method. The simulation results show that the total transmission power decreases significantly after applying the proposed algorithms.