The common-sense reasoning abilities and vast general knowledge of large language models (LLMs) make them a natural fit for interpreting user requests in a smart home assistant context. LLMs, however, lack specific knowledge about the user and their home, which limits their potential impact. Smart home agent with grounded execution (SAGE), overcomes these and other limitations by using a scheme in which a user request triggers an LLM-controlled sequence of discrete actions. These actions can be used to retrieve information, interact with the user, or manipulate device states. SAGE controls this process through a dynamically constructed tree of LLM prompts, which help it decide which action to take next, whether an action was successful, and when to terminate the process. The SAGE action set augments an LLM’s capabilities to support some of the most critical requirements for a smart home assistant. These include: flexible and scalable user preference management (“Is my team playing tonight?”), access to any smart device’s full functionality without device-specific code via API reading (“Turn down the screen brightness on my dryer”), persistent device state monitoring (“Remind me to throw out the milk when I open the fridge”), natural device references using only a photo of the room (“Turn on the lamp on the dresser”), and more. We introduce a benchmark of 50 new and challenging smart home tasks where SAGE achieves a 76% success rate, significantly outperforming existing LLM-enabled baselines (30% success rate).

Digital twins are expected to play an important role in the widespread adaptation of AI-based networking solutions in the real world. The calibration of these virtual replicas is critical to ensure a trustworthy replication of the real environment. This work focuses on the input parameter calibration of radio access network (RAN) simulators using real network performance metrics as supervision signals. Usually, the RAN digital twin is considered a black-box function and each calibration problem is viewed as a standalone search problem. RAN simulators are slow and non-differentiable, often posing as the bottleneck in the execution time for these search problems. In this work, we aim to accelerate the search process by reducing the number of interactions with the simulator by leveraging RAN interactions from previous problems. We present a sequential Bayesian optimization framework that uses information from the past to warm-start the calibration process. Assuming that the network performance exhibits gradual and periodic changes, the stored information can be reused in future calibrations. We test our method across multiple physical sites over one week and show that using the proposed framework, we can obtain better calibration with a smaller number of interactions with the simulator during the search phase.

Channel estimation in reconfigurable intelligent surfaces (RIS)-aided systems is crucial for optimal configuration of the RIS and various downstream tasks such as user localization. In RIS-aided systems, channel estimation involves estimating two channels for the user-RIS (UE-RIS) and RIS-base station (RIS-BS) links. In the literature, two approaches are proposed: (i) cascaded channel estimation where the two channels are collapsed into a single one and estimated using training signals at the BS, and (ii) separate channel estimation that estimates each channel separately either in a passive or semi-passive RIS setting. In this work, we study the separate channel estimation problem in a fully passive RIS-aided millimeter-wave (mmWave) single-user single-input multiple-output (SIMO) communication system. First, we adopt a variational-inference (VI) approach to jointly estimate the UE-RIS and RIS-BS instantaneous channel state information (I-CSI). In particular, auxiliary posterior distributions of the I-CSI are learned through the maximization of the evidence lower bound. However, estimating the I-CSI for both links in every coherence block results in a high signaling overhead to control the RIS in scenarios with highly mobile users. Thus, we extend our first approach to estimate the slow-varying statistical CSI of the UE-RIS link overcoming the highly variant I-CSI. Precisely, our second method estimates the I-CSI of RIS-BS channel and the UE-RIS channel covariance matrix (CCM) directly from the uplink training signals in a fully passive RIS-aided system. The simulation results demonstrate that using maximum a posteriori channel estimation using the auxiliary posteriors can provide a capacity that approaches the capacity with perfect CSI. Leveraging the UE-RIS CCM enhances spectral efficiency by minimizing the training overhead required to control the RIS, and exploiting its low-rank structure reduces training overhead compared to the maximum likelihood estimator.

With the proliferation of deep learning techniques for wireless communication, several works have adopted learning-based approaches to solve the channel estimation problem. While these methods are usually promoted for their computational efficiency at inference time, their use is restricted to specific stationary training settings in terms of communication system parameters, e.g., signal-to-noise ratio (SNR) and coherence time. Therefore, the performance of these learning-based solutions will degrade when the models are tested on different settings than the ones used for training. This motivates our work in which we investigate continual supervised learning (CL) to mitigate the shortcomings of the current approaches. In particular, we design a set of channel estimation tasks wherein we vary different parameters of the channel model. We focus on Gauss-Markov Rayleigh fading channel estimation to assess the impact of non-stationarity on performance in terms of the mean square error (MSE) criterion. We study a selection of state-of-the-art CL methods and we showcase empirically the importance of catastrophic forgetting in continuously evolving channel settings. Our results demonstrate that the CL algorithms can improve the interference performance in two channel estimation tasks governed by changes in the SNR level and coherence time.

We propose a variational inference-based channel estimation method in fully passive reconfigurable intelligent surface (RIS)-aided mmWave single-user single-input multiple-output (SIMO) communication systems. The main goal is to jointly estimate the user equipment (UE)-to-RIS (UE-RIS) and RIS-to-base station (RIS-BS) channels using uplink training signals in a passive RIS setup. Specifically, by using a variational inference framework, we approximate the posterior of the channels with convenient distributions given the received uplink training signals. The parameters of the approximated distributions are generated by deep neural networks trained using variational loss functions derived using a lower bound on the log-likelihood of the received signal. Then, the learned distributions, which are close to the true posterior distributions in terms of Kullback Leibler divergence, are leveraged to obtain the maximum a posteriori (MAP) estimation of the UE-RIS and RIS-BS channels. We evaluate the proposed channel estimation solution under two channel priors. The first channel prior models Rayleigh fading channels with Gaussian prior, whereas the second one represents sparse channels in the angular domain with Laplace prior. The simulation results demonstrate that MAP channel estimates using the approximated posteriors yield a capacity which is close to the one achieved with the true posteriors, thus demonstrating the effectiveness of the proposed method.

Digital twins have shown a great potential in supporting the development of wireless networks. They are virtual representations of 5G/6G systems enabling the design of machine learning and optimization-based techniques. Field data replication is one of the critical aspects of building a simulation-based twin, where the objective is to calibrate the simulation to match field performance measurements. Since wireless networks involve a variety of key performance indicators (KPIs), the replication process becomes a multi-objective optimization problem in which the purpose is to minimize the error between the simulated and field data KPIs. Unlike previous works, we focus on designing a data-driven search method to calibrate the simulator and achieve accurate and reliable reproduction of field performance. This work proposes a search-based algorithm based on mixed-variable particle swarm optimization (PSO) to find the optimal simulation parameters. Furthermore, we extend this solution to account for potential conflicts between the KPIs using a-fairness concept to adjust the importance attributed to each KPI during the search. Experiments on field data showcase the effectiveness of our approach to (i) improve the accuracy of the replication, (ii) enhance the fairness between the different KPIs, and (iii) guarantee faster convergence compared to other methods.

Load balancing has become a key technique to handle the increasing traffic demand and improve the user experience. It evenly distributes the traffic across network resources by offloading users from overloaded base stations or channels to less crowded ones. Load balancing is a multi-objective optimization problem involving the automatic adjustment of several parameters to simultaneously maximize multiple network performance indicators. However, the existing methods mostly rely on single-objective approaches which lead to sub-optimal solutions. In this paper, we introduce the first multi-objective reinforcement learning (MORL) framework for load balancing. Specifically, we propose a solution based on meta-reinforcement learning (meta-RL) to learn a general policy capable of quickly adapting to new trade-offs between the objectives. We further enhance the generalization of our proposed solution using policy distillation techniques. To showcase the effectiveness of our framework, experiments are conducted based on real-world traffic scenarios. Our results show that our load balancing framework can (i) significantly outperform the existing rule-based and single-objective solutions, (ii) compute better Pareto front approximations compared to MORL baselines, and (iii) quickly adapt to new objective trade-offs.