We revisit the concept of constraint embedding as a means for dealing with kinematic loop constraints during dynamics computations for rigid-body systems. Specifically, we consider the local loop constraints emerging from common actuation sub-mechanisms in modern robotics systems (e.g., geared motors, differential drives, and four-bar mechanisms). As a complementary perspective to prior work on constraint embedding, we present an analysis that generalizes the traditional concepts of joint models and motion/force subspaces between individual rigid bodies to generalized joint models and motion/force subspaces between groups of rigid bodies subject to loop constraints. We then use these generalized concepts to derive the constraint-embedded recursive forward dynamics algorithm using multi-handle articulated bodies. We demonstrate the broad applicability of the generalized joint concepts by showing how they also lead to the constraint-embedding-based recursive algorithm for inverse dynamics. Lastly, we benchmark our open-source implementation in C++ for the forward dynamics algorithm against state-of-the-art, sparsity-exploiting algorithms. Our alternative derivation is intended to make the constraint embedding methodology more accessible to the broader robotics community, while the benchmarking study clarifies the relative strengths and limitations of constraint embedding versus sparsity-exploiting methods. Indeed, our benchmarking validates that constraint embedding outperforms the non-recursive alternative in cases involving local kinematic loops.

Mobile manipulators have gained attention for the potential in performing large-scale tasks which are beyond the reach of fixed-base manipulators. The Robotic Task Sequencing Problem for mobile manipulators often requires optimizing the motion sequence of the robot to visit multiple targets while reducing the number of base placements. A two-step approach to this problem is clustering the task-space into clusters of targets before sequencing the robot motion. In this paper, we propose a task-space clustering method which formulates the clustering step as a Set Cover Problem using bipartite graph and reachability analysis, then solves it to obtain the minimum number of target clusters with corresponding base placements. We demonstrated the practical usage of our method in a mobile drilling experiment containing hundreds of targets. Multiple simulations were conducted to benchmark the algorithm and also showed that our proposed method found, in practical time, better solutions than the existing state-of-the-art methods.

With the rapid rise of 3D-printing as a competitive mass manufacturing method, manual "decaking" - i.e. removing the residual powder that sticks to a 3D-printed part - has become a significant bottleneck. Here, we introduce, for the first time to our knowledge, a robotic system for automated decaking of 3D-printed parts. Combining Deep Learning for 3D perception, smart mechanical design, motion planning, and force control for industrial robots, we developed a system that can automatically decake parts in a fast and efficient way. Through a series of decaking experiments performed on parts printed by a Multi Jet Fusion printer, we demonstrated the feasibility of robotic decaking for 3D-printing-based mass manufacturing.