Efficient and low-latency wireless connectivity between the base station (BS) and a sparse set of sporadically active devices from a massive number of devices is crucial for emerging massive machine-type communications (mMTC). This paper addresses the challenge of identifying active devices while meeting stringent access delay and reliability constraints in mMTC environments. A novel multi-stage active device identification framework is proposed where we aim to refine a partial estimate of the active device set using feedback and hypothesis testing across multiple stages eventually leading to an exact recovery of active devices after the final stage of processing. In our proposed approach, active devices independently transmit binary preambles during each stage, leveraging feedback signals from the BS, whereas the BS employs a non-coherent binary energy detection. The minimum user identification cost associated with our multi-stage non-coherent active device identification framework with feedback, in terms of the required number of channel-uses, is quantified using information-theoretic techniques in the asymptotic regime of total number of devices ℓ when the number of active deviceskscales ask= Θ(1). Practical implementations of our multi-stage active device identification schemes, leveraging Belief Propagation (BP) techniques, are also presented and evaluated. Simulation results show that our multi-stage BP strategies exhibit superior performance over single-stage strategies, even when considering overhead costs associated with feedback and hypothesis testing.

Efficiently identifying active devices with minimal latency is crucial in massive machine-type communication networks characterized by sparse and sporadic device activity. This paper addresses the above challenge by introducing a novel active device identification strategy which employs a multi-stage framework that iteratively refines partial estimates of active devices through feedback and hypothesis testing, leading to an exact recovery. In our proposed method, active devices transmit binary preambles independently in each stage, utilizing feedback signals from the BS. Meanwhile, the BS utilizes non-coherent binary energy detection. In addition to theoretical bounds, practical implementations of our multi-stage active device identification schemes using Belief Propagation (BP) techniques are presented. Our simulation results demonstrate that the multi-stage strategy is superior to the single-stage one introduced in our earlier work and performs close to the theoretical bound, even when considering overhead costs related to feedback.

Reliable and prompt identification of active users is critical for enabling random access in massive machine-to-machine type networks which typically operate within stringent access delay and energy constraints. In this paper, an energy efficient active user identification protocol is envisioned in which the active users simultaneously transmit On-Off Keying (OOK) modulated preambles whereas the base station uses non-coherent detection to avoid the channel estimation overheads. The minimum number of channel-uses required for active user identification in the asymptotic regime of total number of users ℓ when the number of active devices k scales as k = Θ(1) is characterized along with an achievability scheme relying on the equivalence of activity detection to a group testing problem. A practical scheme for active user identification based on a belief propagation strategy is also proposed and its performance is compared against the theoretical bounds.

Massive Machine-Type Communications (mMTC) is a key service category in the current generation of wireless networks featuring an extremely high density of energy and resource-limited devices with sparse and sporadic activity patterns. In order to enable random access in such mMTC networks, base station needs to identify the active devices while operating within stringent access delay constraints. In this paper, an energy efficient active device identification protocol is proposed in which active devices transmit On-Off Keying (OOK) modulated preambles jointly and base station employs non-coherent energy detection avoiding channel estimation overheads. The minimum number of channel-uses required by the active user identification protocol is characterized in the asymptotic regime of total number of devices$\ell $when the number of active devices$k$scales as$k=\Theta (1)$along with an achievability scheme relying on the equivalence of activity detection to a group testing problem. Several practical schemes based on Belief Propagation (BP) and Combinatorial Orthogonal Matching Pursuit (COMP) are also proposed. Simulation results show that BP strategies outperform COMP significantly and can operate close to the theoretical achievability bounds. In a partial-recovery setting where few misdetections are allowed, BP continues to perform well.

Current IoT networks are characterized by an ultra-high density of devices with different energy budget constraints, typically having sparse and sporadic activity patterns. Access points require an efficient strategy to identify the active devices for a timely allocation of resources to enable massive machine-type communication. Recently, group testing based approaches have been studied to handle sparse activity detection in massive random access problems. In this paper, a non-adaptive group testing strategy is proposed which can take into account the energy constraints on different sensor clusters. A theoretical extension of the existing randomized group testing strategies to the case of multiple clusters is presented and the necessary constraints that the optimal sampling parameters should satisfy in order to improve the efficiency of group tests is established. The cases of fixed activity pattern where there is a fixed set of active sensors and random activity pattern where each sensor can be independently active with certain probability are examined. The theoretical results are verified and validated by Monte-Carlo simulations. In massive wireless sensor networks comprising of devices with different energy efficiencies, our proposed low-power-use mode of access can potentially extend the lifetime of battery powered sensors with finite energy budget.

Many-access channel (MnAC) model allows the number of users in the system and the number of active users to scale as a function of the blocklength and as such is suited for dynamic communication systems with massive number of users such as the Internet of Things. Existing MnAC models assume a priori knowledge of channel gains which is impractical since acquiring Channel State Information (CSI) for massive number of users can overwhelm the available radio resources. This paper incorporates Rayleigh fading effects to the MnAC model and derives an upper bound on the symmetric message-length capacity of the Rayleigh-fading Gaussian MnAC. Furthermore, a lower bound on the minimum number of channel uses for discovering the active users is established. In addition, the performance of Noisy-Combinatorial Orthogonal Matching Pursuit (N-COMP) based group testing (GT) is studied as a practical strategy for active device discovery. Simulations show that, for a given SNR, as the number of users increase, the required number of channel uses for N-COMP GT scales approximately the same way as the lower bound on minimum user identification cost. Moreover, in the low SNR regime, for sufficiently large population sizes, the number of channel uses required by N-COMP GT was observed to be within a factor of two of the lower bound when the expected number of active users scales sub-linearly with the total population size.

This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz–1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on the reflection coefficient for rough surfaces is investigated. Received power is derived using two popular scattering models — the directive scattering (DS) model and the radar cross section (RCS) model through simulations over a wide range of frequencies, materials, and orientations for the two models, and measurements confirm the accuracy of the DS model at 140 GHz. This paper shows that scattering can become a prominent propagation mechanism as frequencies extend to millimeter-wave (mmWave) and beyond, but at other times can be treated like simple reflection. Knowledge of scattering effects is critical for appropriate and realistic channel models, which further support the development of massive multiple input-multiple output (MIMO) techniques, localization, ray tracing tool design, and imaging for future 5G and 6G wireless systems.