LoRa has been widely applied in various vertical areas such as smart grids, smart cities, etc. Packet collisions caused by concurrent transmissions have become one of the major limitations of LoRa networks due to the ALOHA MAC protocol and dense deployment. The existing studies on packet recovery usually assume that the collided packet signals are above the noise floor. However, considering the large-scale deployment and low-power nature of LoRa communications, many collided packets are below the noise floor. Consequently, the existing schemes will suffer from significant performance degradation in practical LoRa networks. To address this issue, we propose CPR, a Cooperative Packet Recovery mechanism aiming at recovering the collided packets below the noise floor. CPR firstly employs the incoherence of signals and noises at multiple gateways to detect and extract the frequency features of the collided packets hidden in the noise. Then, CPR adopts a novel gateway selection strategy to select the most appropriate gateways based on their packet power domain features extracted from collision detection, such that the interference can be eliminated and the original packets can be recovered. Extensive experimental results demonstrate that CPR can significantly increase the symbol recovery ratio in low-SNR scenarios.

LoRa has become one of the most promising networking technologies for Internet-of-Things applications. Distant end devices have to use a low data rate to reach a LoRa gateway, causing long in-the-air transmission time and high energy consumption. Compared with the end devices using high data rates, they will drain the batteries much earlier and the network may be broken early. Such an energy unfairness can be mitigated by deploying more gateways. However, with more gateways, more end devices may choose small spreading factors to reach closer gateways, increasing the collision probability. In this paper, we propose a networking solution for LoRa networks, EF-LoRa, that can achieve energy fairness among end devices by carefully allocating network resources, including frequency channels, spreading factors and transmission power. We develop a LoRa network model to study the energy consumption of the end devices, considering the unique features of LoRa networks such as LoRaWAN MAC protocol and the capacity limitation of a gateway. We formulate the energy fairness allocation as an optimization problem, and propose a greedy allocation algorithm to achieve max-min fairness of energy efficiency. Simulation results show that EF-LoRa can improve the energy fairness of the state-of-the-art works by 177.8%.

Low-power wireless networks (LPWNs) are of paramount importance for the pervasive deployment of Internet-of-Things (IoT). To deal with the lossy nature of LPWNs, opportunistic routing (OR) and multichannel communications (MC) have received significant research interests. In particular, coupling OR with MC has become an important way to further enhance the communication performance in LPWNs. However, as OR requires nodes in the same channel while MC separates nodes into different channels, the benefits of MC-OR combination are largely under-utilized. To address this problem, we investigate the challenging issue of establishing opportunistic routing in multichannel LPWNs. Different from the existing studies that separately assign channels and select forwarders, we propose a synergistic multichannel and opportunistic routing (SMOpp) approach, which jointly combines the benefits of both OR and MC by considering link correlation. SMOpp explicitly evaluates the routing opportunities of each channel/forwarder set and then employs a forwarder-initiated scheme to select the best combinations of senders, forwarders, and channels. The testbed evaluation shows that compared to the existing methods, SMOpp significantly improves the transmission efficiency for LPWNs.

The last few decades have witnessed an explosive growth of the Internet-of-Things (IoT) systems, which provide ubiquitous sensing and computing services. When adopted in industrial and manufacturing environments, IoT is referred to as the industrial IoT (IIoT), which has attracted increasing research attention. Energy efficiency is one of the most important research topics in green IIoT, as 1) the limited resource can significantly affect the lifetime of IIoT systems and 2) massive sensors, devices, machines keep consuming a considerable amount of energy, and increasing the carbon footprint. In this article, we present a comprehensive survey on energy-efficient communications and computation mechanisms in IIoT systems (such as smart grids). We categorize the existing works, review, discuss, and compare the works to explore their pros and cons. We also discuss the open issues and research challenges, considering the recent 5G communications and edge computing trends.