Shaking a cup of wine or other fluids in virtual environments is engaging but has been limited by challenges in delivering real-time haptic feedback for liquid collisions. ShakeSense is a haptic rendering system that integrates electrotactile stimulation with physics-based simulation to deliver immersive feedback for liquid dynamics in handheld containers. It employs a high-density electrode array to deliver dynamic tactile sensations, conveying friction and pressure changes on the user’s fingerpad. A dedicated end-to-end pipeline computes fingerpad forces from liquid-container-finger interactions, ensuring feedback aligns with natural fluid movement. Two studies evaluated ShakeSense’s performance and user perception. Study 1 showed that electrotactile patterns were distinguishable across directions, and synchronizing container movement with stimulation enhanced perceived force changes. Study 2 demonstrated that ShakeSense effectively simulated liquid motion, capturing multidimensional, coordinated interactions, and outperformed conventional Center-of-Mass approaches. Overall, ShakeSense provides clear, fine-grained tactile feedback for fluid interactions.

Grasping objects typically relies on visual input to pre-shape the hand and plan movement trajectories, a process often disrupted in visually impaired (VI) individuals. ElectroGrasp is a wearable electro-tactile system that delivers anticipatory proprioceptive and tactile information through three complementary modalities: Grasping Orientation, Size, and Shape. This system dynamically conveys spatial features-thereby enhancing anticipatory grasp planning and control through tactile perception. Three experiments were conducted to evaluate ElectroGrasp. The first examined tactile pattern discriminability, size perception thresholds, and the reliability of orientation encoding. The second assessed learning time with ElectroGrasp and its effectiveness in supporting spatial representation, demonstrating accurate spatial perception of objects from electrotactile input. The third compared grasp aperture under audio versus electrotactile cues, revealing that ElectroGrasp reduced hand overshoot and regrasp corrections. Overall, the results demonstrate that ElectroGrasp provides efficient tactile information, enables improved anticipatory grasp planning comparable to visual cues, and offers a novel assistive solution for VI users.

This paper presents TacTex, a textile-based interface that provides high-resolution haptic feedback and touch-tracking capabilities. TacTex utilizes electrotactile stimulation, which has traditionally posed challenges due to limitations in textile electrode density and quantity. TacTex overcomes these challenges by employing a multi-layer woven structure that separates conductive weft and warp electrodes with non-conductive yarns. The driving system for TacTex includes a power supply, sensing board, and switch boards to enable spatial and temporal control of electrical stimuli on the textile, while simultaneously monitoring voltage changes. TacTex can stimulate a wide range of haptic effects, including static and dynamic patterns and different sensation qualities, with a resolution of 512 × 512 and based on linear electrodes spaced as closely as 2mm. We evaluate the performance of the interface with user studies and demonstrate the potential applications of TacTex interfaces in everyday textiles for adding haptic feedback.

Typing in mid-air is often perceived as intuitive yet presents challenges due to finger coactivation, a neuromechanical phenomenon that involves involuntary finger movements stemming from the lack of physical constraints. Previous studies were used to examine and address the impacts of finger coactivation using algorithmic approaches. Alternatively, this paper explores the neuromechanical effects of finger coactivation on mid-air typing, aiming to deepen our understanding and provide valuable insights to improve these interactions. We utilized a wearable device that restrains finger coactivation as a prop to conduct two mid-air studies, including a rapid finger-tapping task and a ten-finger typing task. The results revealed that restraining coactivation not only reduced mispresses, which is a classic coactivated error always considered as harm caused by coactivation. Unexpectedly, the reduction of motor control errors and spelling errors, thinking as non-coactivated errors, also be observed. Additionally, the study evaluated the neural resources involved in motor execution using functional Near Infrared Spectroscopy (fNIRS), which tracked cortical arousal during mid-air typing. The findings demonstrated decreased activation in the primary motor cortex of the left hemisphere when coactivation was restrained, suggesting a diminished motor execution load. This reduction suggests that a portion of neural resources is conserved, which also potentially aligns with perceived lower mental workload and decreased frustration levels.

This work presents PITAS, a thin-sheet robotic material composed of a reversible phase transition actuating layer and a heating/sensing layer. The synthetic sheet material enables non-expert makers to create shape-changing devices that can locally or remotely convey physical information such as shape, color, texture and temperature changes. PITAS sheets can be manipulated into various 2D shapes or 3D geometries using subtractive fabrication methods such as laser, vinyl, or manual cutting or an optional additive 3D printing method for creating 3D objects. After describing the design of PITAS, this paper also describes a study conducted with thirteen makers to gauge the accessibility, design space, and limitations encountered when PITAS is used as a soft robotic material while designing physical information communication devices. Lastly, this work reports on the results of a mechanical and electrical evaluation of PITAS and presents application examples to demonstrate its utility.

This paper presents FlexHaptics, a design method for creating custom haptic input interfaces. Our approach leverages planar compliant structures whose force-deformation relationship can be altered by adjusting the geometries. Embedded with such structures, a FlexHaptics module exerts a fine-tunable haptic effect (i.e., resistance, detent, or bounce) along a movement path (i.e., linear, rotary, or ortho-planar). These modules can work separately or combine into an interface with complex movement paths and haptic effects. To enable the parametric design of FlexHaptic modules, we provide a design editor that converts user-specified haptic properties into underlying mechanical structures of haptic modules. We validate our approach and demonstrate the potential of FlexHaptic modules through six application examples, including a slider control for a painting application and a piano keyboard interface on touchscreens, a tactile low vision timer, VR game controllers, and a compound input device of a joystick and a two-step button.

We present Shape-Haptics, an approach for designers to rapidly design and fabricate passive force feedback mechanisms for physical interfaces. Such mechanisms are used in everyday interfaces and tools, and they are challenging to design. Shape-Haptics abstracts and broadens the haptic expression of this class of force feedback systems through 2D laser cut configurations that are simple to fabricate. They leverage the properties of polyoxymethylene plastic and comprise a compliant spring structure that engages with a sliding profile during tangible interaction. By shaping the sliding profile, designers can easily customize the haptic force feedback delivered by the mechanism. We provide a computational design sandbox to facilitate designers to explore and fabricate Shape-Haptics mechanisms. We also propose a series of applications that demonstrate the utility of Shape-Haptics in creating and customizing haptics for different physical interfaces.

As touch interactions become ubiquitous in the field of human computer interactions, it is critical to enrich haptic feedback to improve efficiency, accuracy, and immersive experiences. This paper presents HapTag, a thin and flexible actuator to support the integration of push button tactile renderings to daily soft surfaces. Specifically, HapTag works under the principle of hydraulically amplified electroactive actuator (HASEL) while being optimized by embedding a pressure sensing layer, and being activated with a dedicated voltage appliance in response to users’ input actions, resulting in fast response time, controllable and expressive push-button tactile rendering capabilities. HapTag is in a compact formfactor and can be attached, integrated, or embedded on various soft surfaces like cloth, leather, and rubber. Three common push button tactile patterns were adopted and implemented with HapTag. We validated the feasibility and expressiveness of HapTag by demonstrating a series of innovative applications under different circumstances.