Automating labor-intensive tasks such as crop monitoring with robots is essential for enhancing production and conserving resources. However, autonomously monitoring horticulture crops remains challenging due to their complex structures, which often result in fruit occlusions. Existing view planning methods attempt to reduce occlusions but either struggle to achieve adequate coverage or incur high robot motion costs. We introduce a global optimization approach for view motion planning that aims to minimize robot motion costs while maximizing fruit coverage. To this end, we leverage coverage constraints derived from the set covering problem (SCP) within a shortest Hamiltonian path problem (SHPP) formulation. While both SCP and SHPP are well-established, their tailored integration enables a unified framework that computes a global view path with minimized motion while ensuring full coverage of selected targets. Given the NP-hard nature of the problem, we employ a region-prior-based selection of coverage targets and a sparse graph structure to achieve effective optimization outcomes within a limited time. Experiments in simulation demonstrate that our method detects more fruits, enhances surface coverage, and achieves higher volume accuracy than the motion-efficient baseline with a moderate increase in motion cost, while significantly reducing motion costs compared to the coverage-focused baseline. Real-World experiments further confirm the practical applicability of our approach.

Autonomous assembly is an essential capability for industrial and service robots, with Peg-in-Hole (PiH) insertion being one of the core tasks. However, PiH assembly in unknown environments is still challenging due to uncertainty in task parameters, such as the hole position and orientation, resulting from sensor noise. Although context-based meta reinforcement learning (RL) methods have been previously presented to adapt to unknown task parameters in PiH assembly tasks, the performance depends on a sample-inefficient procedure or human demonstrations. Thus, to enhance the applicability of meta RL in real-world PiH assembly tasks, we propose to train the agent to use information from the robot’s forward kinematics and an uncalibrated camera. Furthermore, we improve the applicability by efficiently adapting the meta-trained agent to use data from force/torque sensor. Finally, we propose an adaptation procedure for out-of-distribution tasks whose parameters are different from the training tasks. Experiments on simulated and real robots prove that our modifications enhance the sample efficiency during meta training, real-world adaptation performance, and generalization of the context-based meta RL agent in PiH assembly tasks compared to previous approaches.

Existing view planning systems either adopt an iterative paradigm using next-best views (NBV) or a one-shot pipeline relying on the set-covering view-planning (SCVP) network. However, neither of these methods can concurrently guarantee both high-quality and high-efficiency reconstruction of 3-D unknown objects. To tackle this challenge, we introduce a crucial hypothesis: with the availability of more information about the unknown object, the prediction quality of the SCVP network improves. There are two ways to provide extra information: first, leveraging perception data obtained from NBVs, and second, training on an expanded dataset of multiview inputs. In this work, we introduce a novel combined pipeline that incorporates a single NBV before activating the proposed multiview-activated (MA-)SCVP network. The MA-SCVP is trained on a multiview dataset generated by our long-tail sampling method, which addresses the issue of unbalanced multiview inputs and enhances the network performance. Extensive simulated experiments substantiate that our system demonstrates a significant surface coverage increase and a substantial 45% reduction in movement cost compared to state-of-the-art systems. Real-world experiments justify the capability of our system for generalization and deployment.

Active perception for fruit mapping and harvesting is a difficult task since occlusions occur frequently and the location as well as size of fruits change over time. State-of-the-art viewpoint planning approaches utilize computationally expensive ray casting operations to find good viewpoints aiming at maximizing information gain and covering the fruits in the scene. In this paper, we present a novel viewpoint planning approach that explicitly uses information about the predicted fruit shapes to compute targeted viewpoints that observe as yet unobserved parts of the fruits. Furthermore, we formulate the concept of viewpoint dissimilarity to reduce the sampling space for more efficient selection of useful, dissimilar viewpoints. Our simulation experiments with a UR5e arm equipped with an RGB-D sensor provide a quantitative demonstration of the efficacy of our iterative next best view planning method based on shape completion. In comparative experiments with a state-of-the-art viewpoint planner, we demonstrate improvement not only in the estimation of the fruit sizes, but also in their reconstruction, while significantly reducing the planning time. Finally, we show the viability of our approach for mapping sweet pepper plants with a real robotic system in a commercial glasshouse.

Crop monitoring is crucial for maximizing agricultural productivity and efficiency. However, monitoring large and complex structures such as sweet pepper plants presents significant challenges, especially due to frequent occlusions of the fruits. Traditional next-best view planning can lead to unstructured and inefficient coverage of the crops. To address this, we propose a novel view motion planner that builds a graph network of viable view poses and trajectories between nearby poses, thereby considering robot motion constraints. The planner searches the graphs for view sequences with the highest accumulated information gain, allowing for efficient pepper plant monitoring while minimizing occlusions. The generated view poses aim at both sufficiently covering already detected and discovering new fruits. The graph and the corresponding best view pose sequence are computed with a limited horizon and are adaptively updated in fixed time intervals as the system gathers new information. We demonstrate the effectiveness of our approach through simulated and real-world experiments using a robotic arm equipped with an RGB-D camera and mounted on a trolley. As the experimental results show, our planner produces view pose sequences to systematically cover the crops and leads to increased fruit coverage when given a limited time in comparison to a state-of-the-art single next-best view planner.

Automated agricultural applications, i.e., fruit picking require spatial information about crops and, especially, their fruits. In this paper, we present a novel deep reinforcement learning (DRL) approach to determine the next best view for automatic exploration of 3D environments with a robotic arm equipped with an RGB-D camera. We process the obtained images into an octree with labeled regions of interest (ROIs), i.e., fruits. We use this octree to generate 3D observation maps that serve as encoded input to the DRL network. We hereby do not only rely on known information about the environment, but explicitly also represent information about the unknown space to force exploration. Our network takes as input the encoded 3D observation map and the temporal sequence of camera view pose changes, and outputs the most promising camera movement direction. Our experimental results show an improved ROI targeted exploration performance resulting from our learned network in comparison to a state-of-the-art method.

We present PATHoBot an autonomous crop surveying and intervention robot for glasshouse environments. The aim of this platform is to autonomously gather high quality data and also estimate key phenotypic parameters. To achieve this we retro-fit an off-the-shelf pipe-rail trolley with an array of multi-modal cameras, navigation sensors and a robotic arm for close surveying tasks and intervention. In this paper we describe PATHoBot design choices made to ensure proper operation in a commercial glasshouse environment. As a surveying platform we collect a number of datasets which include both sweet pepper and tomatoes. We show how PATHoBot enables novel surveillance approaches by first improving our previous work on fruit counting by incorporating wheel odometry and depth information. We find that by introducing re-projection and depth information we are able to achieve an absolute improvement of 20 points over the baseline technique in an "in the wild" situation. Finally, we present a 3D mapping case study, further showcasing PATHoBot’s crop surveying capabilities.

Modern agricultural applications require knowledge about the position and size of fruits on plants. However, occlusions from leaves typically make obtaining this information difficult. We present a novel viewpoint planning approach that builds up an octree of plants with labeled regions of interest (ROIs), i.e., fruits. Our method uses this octree to sample viewpoint candidates that increase the information around the fruit regions and evaluates them using a heuristic utility function that takes into account the expected information gain. Our system automatically switches between ROI targeted sampling and exploration sampling, which considers general frontier voxels, depending on the estimated utility. When the plants have been sufficiently covered with the RGB-D sensor, our system clusters the ROI voxels and estimates the position and size of the detected fruits. We evaluated our approach in simulated scenarios and compared the resulting fruit estimations with the ground truth. The results demonstrate that our combined approach outperforms a sampling method that does not explicitly consider the ROIs to generate viewpoints in terms of the number of discovered ROI cells. Furthermore, we show the real-world applicability by testing our framework on a robotic arm equipped with an RGB-D camera installed on an automated pipe-rail trolley in a capsicum glasshouse.