High-quality remote sensing imagery plays a vital role in environmental monitoring and disaster management. However, transmitting these images is challenging due to the unstable signal-to-noise ratio (SNR) and bandwidth limitations encountered in remote communications. Semantic communication, particularly deep learning-based methods, offers a promising solution by jointly optimizing source and channel coding to achieve data compression and noise resilience. Nevertheless, existing methods struggle to cope with varying channel noise and bandwidth, leading to unsatisfactory image reconstruction quality. To address these challenges, we propose a satellite-ground compression and transmission system called Adaptive Residual Joint Source-Channel Coding (ARJSCC), which is based on Deep Joint Source-Channel Coding (DeepJSCC). The ARJSCC system compresses remote sensing images into semantic information and residuals to achieve low overhead transmission and high-quality reconstruction. ARJSCC utilizes an attention module to adjust the semantic preference of the model for different SNRs, and deploys a variance-based position mask module to flexibly vary the semantic length and further compress it. These designs enable ARJSCC to automatically adapt to varying noise and bandwidth conditions. Moreover, for the residual, we apply BPG to compress it to reduce the transmission cost and design the corresponding enhancement module to recover its details from the noise-affected compressed residual. We experimentally compare our ARJSCC with the recent DeepJSCC-based wireless image transmission models in low-resolution dataset and high-resolution remote dataset under multiple wireless channel environments. The experimental results show that ARJSCC can achieve high reconstruction quality exceeding 44dB, and outperform the competitors by 4-6db even under low SNR and bandwidth environments.

Remote sensing imagery plays a crucial role in areas such as environmental monitoring and urban planning. However, due to fragile communication links, limited bandwidth and harsh wireless environments, transmitting data from remote locations to ground applications faces the dilemma of high bit-error rates, which have a poor impact on downstream missions. Semantic communication is a feasible solution that transmits only the semantic features of the raw data extracted using neural networks. Although effective, existing semantic communication methods cannot cope with high compression rate requirements and complex communication environments. Therefore, in this paper, an effective image compression and transmission framework ASE-JSCC is proposed. To minimize the transmitted data, we design a semantic extraction module and an important feature selection module to efficiently extract, select, and compress critical semantic features required for downstream tasks. To improve the communication robustness of the model in complex environments affected by variable channels, we optimize the source-channel joint coding technique by randomly adding noise with different types and sizes. Finally, we deploy ASE-JSCC to the scene classification task of remote sensing images and conduct extensive experiments on four real datasets, achieving classification accuracy of 84.29%--88.62% under 384 times compression ratio, verifying the excellent performance of the proposed framework.

Tensor data is widely used in fields such as smart grids, cloud systems, and deep learning. As the scale of this data increases, storage and transmission costs rise significantly. Many tensor data exhibit low-rank structures, offering the potential for data compression through low-rank decomposition techniques. Tucker decomposition, a typical low-rank decomposition technique, achieves data compression and interpretability by capturing complex data correlations and representing the original tensor with a compact core tensor and factor matrices. However, the compression ratio provided by Tucker decomposition is often insufficient, particularly for large-scale tensors. To tackle this issue, we propose a robust low-rank tensor compression method that leverages Tucker decomposition with quantization and coding. Initially, we establish a robust Tucker decomposition framework that decomposes the low-rank tensor into a core tensor and factor matrices using well-designed Tucker rank-setting rules. This framework effectively handles noise and missing values. Subsequently, we conduct an in-depth analysis of the numerical characteristics of the core tensor and factor matrices within the Tucker decomposition framework. Based on their distinct characteristics, we design tailored quantization and coding schemes to compress the core tensor and factor matrices, respectively, thereby significantly improving the compression ratio of Tucker decomposition while maintaining high accu-racy. Through extensive experiments on four publicly available datasets (which can form 3 or 4 order tensors), we demonstrate that our approach can achieve compression ratios$4\times-10\times$higher than the best competitor, with recovery errors improved by 8% - 42%.

Network trouble shooting, failure location, and anomaly detection rely heavily on network traffic measurement data. Due to the lack of measurement infrastructure, the high measurement cost, and the unavoidable transmission loss, network monitoring systems suffer from the problem that the network traffic data are incomplete. This article models the traffic data as a tensor to exploit its strong ability of feature extraction to recover the missing data. Different from traditional tensor completion which relies on tensor factorization, we design a novel Deep Adversarial Tensor Completion (DATC) scheme based on Deep Learning (DL) techniques. DATC is the first scheme that exploits the data reconstruction ability of autoencoder and the power of adversarial training from Generative Adversarial Networks to infer the missing data. Despite that DL techniques achieve great success in the image field, designing an algorithm based on DL techniques to recover the traffic data with missing entries faces additional challenges due to the skewed distribution and the sparsity of traffic data. To conquer these challenges, we propose the use of two techniques, adversarial training and missing data aware convolution. These techniques help DATC to learn the complex features of the traffic data and infer the missing data following the data distribution of traffic data. Our extensive experimental results using two public real-world network traffic datasets and running both offline and online demonstrate that DATC can achieve significantly better recovery accuracy while capturing the data distribution of the traffic data even when the sampling ratio is very low.

Network traffic engineering and anomaly detection rely heavily on network traffic measurement. Due to the lack of infrastructure to measure all points of interest, the high measurement cost, and the unavoidable transmission loss, network monitoring systems suffer from the problem that the network traffic data are incomplete with only a subset of paths or time slots measured. Recent studies show that tensor completion can be applied to infer the missing traffic data from partial measurements. Although promising, the interaction model adopted in current tensor completion algorithms can only capture linear and simple correlations in the traffic data, which compromises the recovery performance. To solve the problem, we propose a new tensor completion scheme based on Lightweight Trilinear Pooling, which designs (1) a Trilinear Pooling, a new multi-modal fusion method to model the interaction function to capture the complex correlations, (2) a low-rank decomposition based neural network compression method to reduce the storage and computation complexity, (3) an attention enhanced LSTM to encode and incorporate the temporal patterns in the tensor completion scheme. The extensive experiments on three real-world network traffic datasets demonstrate that our scheme can significantly reduce the error in missing data recovery with fast speed using small storage.

Network applications, such as network state tracking and forecasting, anomaly detection, and failure recovery, require complete network monitoring data. However, the monitoring data are often incomplete due to the use of partial measurements and the unavoidable loss of data during transmissions. Tensor completion has attracted some recent attentions with its capability of exploiting the multi-dimensional data structure for more accurate un-measurement/missing data inference. Although conventional tensor completion algorithms can work well when the application data follow the symmetric normal distribution, it cannot well handle network monitoring data which are highly skewed with heavy tails. To better follow the data distribution for more accurate recovery of the missing entries with large values, we propose a novel expectile tensor completion (ETC) formulation and a simple yet efficient tensor completion algorithm without hard-setting parameters for easy implementation. From both experimental and theoretical ways, we prove the convergence of the proposed algorithm. Extensive experiments on two real-world network monitoring datasets demonstrate the effectiveness of the proposed ETC.

The inference of the network traffic data from partial measurements data becomes increasingly critical for various network engineering tasks. By exploiting the multi-dimensional data structure, tensor completion is a promising technique for more accurate missing data inference. However, existing tensor completion algorithms generally have the strong assumption that the tensor data have a global low-rank structure, and try to find a single and global model to fit the data of the whole tensor. In a practical network system, a subset of data may have stronger correlation. In this work, we propose a novel localized tensor completion model (LTC) to increase the data recovery accuracy by taking advantage of the stronger local correlation of data to form and recover sub-tensors each with a lower rank. Despite that it is promising to use local tensors, the finding of correlated entries faces two challenges, the data with adjacent indexes are not ones with higher correlation and it is difficult to find the similarity of data with missing tensor entries. To conquer the challenges, we propose several novel techniques: efficiently calculating the candidate anchor points based on locality-sensitive hash (LSH), building sub-tensors around properly selected anchor points, encoding factor matrices to facilitate the finding of similarity with missing entries, and similarity-aware local tensor completion and data fusion. We have done extensive experiments using real traffic traces. Our results demonstrate that LTC is very effective in increasing the tensor recovery accuracy without depending on specific tensor completion algorithms.