Orthogonal time frequency space (OTFS) modulation has emerged as a promising solution to mitigate the severe Doppler shift in low Earth orbit (LEO) satellite communications. However, the frequency-dependent Doppler shift induced by the high mobility of LEO satellites leads to the Doppler squint effect (DSE). This effect compromises the channel sparsity in the delay-Doppler (DD) domain, rendering existing channel estimation methods ineffective. To overcome this challenge, this paper proposes a DSE-resilient transmission scheme for cyclic prefix OTFS (CP-OTFS)-based LEO satellite systems. Specifically, we analyze the input-output relationship of the CPOTFS- based LEO satellite communication system and derive a DSE-aware representation of the satellite-terrestrial channel in the DD domain. To efficiently capture DSE-aware channel characteristics, we propose a novel OTFS frame structure that allows the energy distribution of the received signal to serve as prior information for channel estimation. Meanwhile, this frame structure strategically allocates pilot symbols to achieve uniform energy distribution and reduce the peak-to-average power ratio (PAPR), while imposing a time-domain waveform continuity constraint to suppress out-of-band emission (OOBE) caused by rectangular pulses. Based on the frame structure, we propose a prior-aided iterative channel reconstruction (PAICR) algorithm to mitigate the severe power leakage induced by DSE. The proposed algorithm iteratively extracts and removes dominant channel components using Doppler-domain received signal energy observations, with a convergence criterion ensuring reliable termination. Furthermore, a Cramer-Rao lower bound is derived to provide a theoretical benchmark for evaluating the algorithm's performance.

This paper introduces an interference-free multi-stream transmission architecture leveraging stacked intelligent metasurfaces (SIMs), from a new perspective of interference exploitation. Unlike traditional interference exploitation precoding (IEP) which relies on computational hardware circuitry, we perform the precoding operations within the analog wave domain provided by SIMs. However, the benefits of SIM-enabled IEP are limited by the nonlinear distortion (NLD) caused by power amplifiers. A hardware-efficient interference-free transmitter architecture is developed to exploit SIM’s high and flexible degree of freedom (DoF), where the NLD on modulated symbols can be directly compensated in the wave domain. Moreover, we design a frame-level SIM configuration scheme and formulate a max-min problem on the safety margin function. With respect to the optimization of SIM phase shifts, we propose a recursive oblique manifold (ROM) algorithm to tackle the complex coupling among phase shifts across multiple layers. A flexible DoF-driven antenna selection (AS) scheme is explored in the SIM-enabled IEP system. Using an ROM-based alternating optimization (ROM-AO) framework, our approach jointly optimizes transmit AS, SIM phase shift design, and power allocation (PA), and develops a greedy safety margin-based AS algorithm. Simulations show that the proposed SIM-enabled frame-level IEP scheme significantly outperforms benchmarks. Specifically, the strategy with AS and PA can achieve a 20 dB performance gain compared to the case without any strategy under the 12 dB signal-to-noise ratio, which confirms the superiority of the NLD-aware IEP scheme and the effectiveness of the proposed algorithm.

Channel knowledge map (CKM) has emerged as a crucial technology for next-generation communication, enabling the construction of high-fidelity mappings between spatial environments and channel parameters via electromagnetic information analysis. Traditional CKM construction methods like ray tracing are computationally intensive. Recent studies utilizing neural networks (NNs) have achieved efficient CKM generation with reduced computational complexity and real-time processing capabilities. Nevertheless, existing research predominantly focuses on single-antenna systems, failing to address the beamforming requirements inherent to MIMO configurations. Given that appropriate precoding vector selection in MIMO systems can substantially enhance user communication rates, this paper presents a TransUNet-based framework for constructing CKM, which effectively incorporates discrete Fourier transform (DFT) precoding vectors. The proposed architecture combines a UNet backbone for multiscale feature extraction with a Transformer module to capture global dependencies among encoded linear vectors. Experimental results demonstrate that the proposed method outperforms state-of-the-art (SOTA) deep learning (DL) approaches, yielding a 17% improvement in RMSE compared to RadioWNet. The code is publicly accessible at https://github.com/github-whh/TransUNet.

Underwater acoustic communication (UWA) faces significant coverage challenges due to the depth-varying sound speed gradients and the presence of sound shadow zones. Acoustic reconfigurable intelligent surface (RIS) is promising as an enabler to enhance acoustic signal quality and reliability. In this paper, we propose a novel full-phase-range acoustic RIS with effective acoustic beamforming scheme. Electrical unit parameters are carefully designed with Tonpilz hardware and equivalent circuit architecture. The reflective magnitude-phase coupling is analytically modelled by dual-quadratic expression. Furthermore, we propose one Majorization-Minimization (MM)-based acoustic RIS beamforming scheme, where alternative maximization approach is coordinated with fractional programming and MM methods to achieve the convex relaxation and near-optimal solutions.

With the advancement of vehicular networking technology, communication between vehicles, and between vehicles and cloudlets, is becoming increasingly frequent, leading to a growing demand for computing resources. This growing demand necessitates more robust and efficient computing solutions to handling the data exchange and processing requirements. Mobile edge computing (MEC) addresses computing demands by leveraging edge resources. In practice, numerous parameter constraints, such as task volumes and available resources, render optimal resource management challenging. This paper presents a vehicular networking communication scenario involving an MEC-enabled roadside unit and multiple vehicles. We propose a new method that jointly optimizes task offloading decisions along with power and bandwidth allocation, aiming to minimize system energy consumption. Given the non-convexity of the original problem, characterized by the complexity and interdependence of multiple optimization variables, we adopt a strategic approach to decouple it into two sub-problems. The problem can be solved using deep learning and subgradient methods separately. Finally, a refined solution can be obtained through iterative solving with the block coordinate descent (BCD) method. Simulations provide compelling evidence that our scheme significantly reduces system energy consumption, outperforming benchmarks and showcasing its superiority.

To enhance the positioning and tracking performance of dynamic user equipment (UE) in wideband millimeter-wave (mmWave) systems, we propose a novel positioning error lower bound (PELB)-driven ping-pong positioning framework, where the base station (BS) and UE alternately transmit and receive adaptive beamforming signals for positioning. All beamformers are scheduled based on the locally evaluated PELB. In this framework, we exploit multi-dimensional information fusion to assist in positioning. Firstly, a multi-subcarrier collaborative positioning error lower bound (MSCPEB) is proposed to evaluate the positioning error limits of wideband mmWave systems, which quantifies the contribution of all subcarriers to positioning accuracy. Moreover, we prove that the MSCPEB does not exceed the arithmetic mean of the PELBs of the individual subcarriers. Subsequently, we develop an alternating optimization (AO) algorithm to optimize the hybrid beamformers targeted for MSCPEB minimization. By convexifying this problem, closed-form solutions of beamformers are derived. Finally, we develop a multipath collaborative positioning method that quantifies the impact of path reliability on positioning accuracy, with a closed-form solution for user position derived. The proposed method does not rely on path resolution and traditional triangular relationships. Numerical results validate that the proposed method improves estimation accuracy by at least 16% compared to potential schemes without optimized beam configurations, while requiring only approximately one-quarter of the slot resources.

Traditional channel acquisition faces significant limitations due to ideal model assumptions and scalability challenges. A novel environment-aware paradigm, known as channel twinning, tackles these issues by constructing radio propagation environment semantics using a data-driven approach. In the spotlight of channel twinning technology, a radio map is recognized as an effective region-specific model for learning the spatial distribution of channel information. However, most studies focus on static channel map construction, with only a few collecting numerous channel samples and using deep learning for radio map prediction. In this paper, we develop a novel dynamic radio map twinning framework with a substantially small dataset. Specifically, we present an innovative approach that employs dynamic mode decomposition (DMD) to model the evolution of the dynamic channel gain map as a dynamical system. We first interpret dynamic channel gain maps as spatio-temporal video stream data. The coarse-grained and fine-grained evolving modes are extracted from the stream data using a new ensemble DMD (Ens-DMD) algorithm. To mitigate the impact of noisy data, we design a median-based threshold mask technique to filter the noise artifacts of the twin maps. With the proposed DMD-based radio map twinning framework, numerical results are provided to demonstrate the low-complexity reproduction and evolution of the channel gain maps. Furthermore, we consider four radio map twin performance metrics to confirm the superiority of our framework compared to the baselines.

Integrated sensing and communication (ISAC) opens up new service possibilities for sixth-generation (6G) systems, where both communication and sensing (C&S) functionalities co-exist by sharing the same hardware platform and radio resource. In this paper, we investigate the waveform design problem in a downlink multi-user and multi-target ISAC system under different C&S performance preferences. The multi-user interference (MUI) may critically degrade the communication performance. To eliminate the MUI, we employ the constructive interference mechanism into the ISAC system, which saves the power budget for communication. However, due to the conflict between C&S metrics, it is intractable for the ISAC system to achieve the optimal performance of C&S objective simultaneously. Therefore, it is important to strike a trade-off between C&S objectives. By virtue of the multi-objective optimization theory, we propose a weighted Tchebycheff-based transformation method to re-frame the C&S trade-off problem as a Pareto-optimal problem, thus effectively tackling the constraints in ISAC systems. Finally, simulation results reveal the trade-off relation between C&S performances, which provides insights for the flexible waveform design under different C&S performance preferences in MIMO-ISAC systems.

Wireless federated learning (WFL) undergoes a communication bottleneck in uplink, limiting the number of users that can upload their local models in each global aggregation round. This paper presents a new multi-carrier non-orthogonal multiple-access (MC-NOMA)-empowered WFL system under an adaptive learning setting of Flexible Aggregation. Since a WFL round accommodates both local model training and uploading for each user, the use of Flexible Aggregation allows the users to train different numbers of iterations per round, adapting to their channel conditions and computing resources. The key idea is to use MC-NOMA to concurrently upload the local models of the users, thereby extending the local model training times of the users and increasing participating users. A new metric, namely, Weighted Global Proportion of Trained Mini-batches (WGPTM), is analytically established to measure the convergence of the new system. Another important aspect is that we maximize the WGPTM to harness the convergence of the new system by jointly optimizing the transmit powers and subchannel bandwidths. This nonconvex problem is converted equivalently to a tractable convex problem and solved efficiently using variable substitution and Cauchy’s inequality. As corroborated experimentally using a convolutional neural network and an 18-layer residential network, the proposed MC-NOMA WFL can efficiently reduce communication delay, increase local model training times, and accelerate the convergence by over 40%, compared to its existing alternative.

The application of intelligent reflecting surface (IRS) depends on the knowledge of channel state information (CSI), and has been hindered by the heavy overhead of channel training, estimation, and feedback in fast-changing channels. This paper presents a new two-timescale beamforming approach to maximizing the average achievable rate (AAR) of IRS-assisted MIMO systems, where the IRS is configured relatively infrequently based on statistical CSI (S-CSI) and the base station precoder and power allocation are updated frequently based on quickly outdated instantaneous CSI (I-CSI). The key idea is that we first reveal the optimal small-timescale power allocation based on outdated I-CSI yields a water-filling structure. Given the optimal power allocation, a new mini-batch sampling (mbs)-based particle swarm optimization (PSO) algorithm is developed to optimize the large-timescale IRS configuration with reduced channel samples. Another important aspect is that we develop a model-driven PSO algorithm to optimize the IRS configuration, which maximizes a lower bound of the AAR by only using the S-CSI and eliminates the need of channel samples. The model-driven PSO serves as a dependable lower bound for the mbs-PSO. Simulations corroborate the superiority of the new two-timescale beamforming strategy to its alternatives in terms of the AAR and efficiency, with the benefits of the IRS demonstrated.

Reconfigurable intelligent surface (RIS) is highly promising to be applied to enable media-based modulation (MBM) transmissions, which is expected to greatly reduce the hardware cost at the transmitter. In this paper, we propose the two MBM schemes for RIS communications, which are non-differential and differential schemes. In the non-differential scheme, we utilize the phase variations of the RIS to achieve a higher transmission rate compared to the conventional MBM schemes with radio frequency (RF) mirrors. Particularly, in the differential scheme, we decompose the space time block (STB) matrix into a phase state space (PSS) matrix and a selection-permutation (SP) matrix for enhancing the flexibility of differential modulation. The proposed treatment breaks through two inherent design limitations in the traditional differential space time block code (DSTBC). Moreover, the upper bound on the average symbol error rate (SER) of both schemes are derived. Finally, the theory and simulation results show that our proposed schemes can achieve higher transmission rates than the benchmark schemes.

This paper proposes to deploy multiple reconfigurable intelligent surfaces (RISs) in device-to-device (D2D)-underlaid cellular systems. The uplink sum-rate of the system is maximized by jointly optimizing the transmit powers of the users, the pairing of the cellular users (CUs) and D2D links, the receive beamforming of the base station (BS), and the configuration of the RISs, subject to the power limits and quality-of-service (QoS) of the users. To address the non-convexity of this problem, we develop a new block coordinate descent (BCD) framework which decouples the D2D-CU pairing, power allocation and receive beamforming, from the configuration of the RISs. Specifically, we derive closed-form expressions for the power allocation and receive beamforming under any D2D-CU pairing, which facilitates interpreting the D2D-CU pairing as a bipartite graph matching solved using the Hungarian algorithm. We transform the configuration of the RISs into a quadratically constrained quadratic program (QCQP) with multiple quadratic constraints. A low-complexity algorithm, named Riemannian manifold-based alternating direction method of multipliers (RM-ADMM), is developed to decompose the QCQP into simpler QCQPs with a single constraint each, and solve them efficiently in a decentralized manner. Simulations show that the proposed algorithm can significantly improve the sum-rate of the D2D-underlaid system with a reduced complexity, as compared to its alternative based on semidefinite relaxation (SDR).

Intelligent reflecting surface (IRS) is envisioned as a promising solution for controlling radio propagation environments in future wireless systems. In this paper, we propose a distributed intelligent reflecting surface (IRS) assisted multi-user millimeter wave (mmWave) system, where IRSs are exploited to enhance the mmWave signal coverage when direct links between base station and users are unavailable. First, a joint active and passive beamforming problem is established for weighted sum-rate maximization. Then, an alternating iterative algorithm with closed-form expressions is proposed to tackle the challenging non-convex problem, thereby decoupling the active and passive beamforming variables. Moreover, we design a constraint relaxation technique to address the unit modulus constraints pertaining to the IRS. Numerical results demonstrate that the distributed IRS can potentially enhance the communication performance of existing wireless systems.