Node-centric Data Centers (NDCs) are highly flexible, cost-efficient, and failure-resilient, and have gained growing popularity in recent years. However, RDMA technology used in NDC still faces challenges, including high retransmission overhead, Head-of-Line Blocking (HoLB) and deadlock problems. Existing solutions for traditional data centers cannot simultaneously address these issues due to the unique topology and server transmission characteristics of NDC. In this paper, we propose a per-port flow control named PortFC for NDC. PortFC addresses the above problems through the designs of a Pause/Resume control signal, a per-port queue allocation method, an egress-detecting per-port flow control mechanism, and a server-aware queue scheduling method. Our evaluation shows that PortFC is free from retransmission, capable of eliminating HoLB and avoiding deadlocks. PortFC achieves 1.7-8.0 times higher throughput and reduces latency by 11.7%-87.7% compared to the state-of-the-art lossy RDMA based on IRN and the lossless RDMA method based on PFC. In particular, PortFC still demonstrates good performance in a Rail-only NDC with heterogeneous bandwidth domains.

Distributed AI model training generates bursty, low-entropy elephant flows that challenge existing single-path transport protocols in multi-stage Clos networks, leading to congestion and inefficiency. Multipath transport emerges as a promising solution, leveraging multiple paths to balance traffic and enhance resilience. However, current multipath RDMA solutions suffer from scalability, congestion control, and load-balancing inefficiencies. This paper introduces Unified Delay-driven Multipath Protocol (UDMP), a novel approach that co-designs congestion control and load balancing using network delay as a unified signal. UDMP employs delay-gradient-based congestion control to precisely resolve unavoidable congestion. Moreover, UDMP leverages delay-assisted load balancing to shift traffic across paths with minimal latency adaptively, maintaining throughput when encountering avoidable congestion. A novel Token Pool design integrates these components, eliminating per-path state overhead while achieving fine-grained traffic distribution. Implementations on DPDK and NS3 demonstrate that UDMP achieves up to 2x higher throughput and reduces flow completion times by up to 30% compared to state-of-the-art methods like MPRDMA and QP-Scaling. These results highlight UDMP’s effectiveness in meeting the stringent performance requirements of modern distributed AI training workloads.

In modern GPU-centric clusters, large-scale AI training relies on two distinct communication domains: a high-bandwidth intra-node domain using proprietary interconnects (e.g., NVLink), and a scale-out inter-node network domain (e.g., RDMA). We observe that the widely-used ring algorithm, often create a significant load imbalance across these domains. This leads to the counter-intuitive scenario where the expensive, high-bandwidth intra-node domain becomes a performance bottleneck, while the inter-node network remains underutilized. This inefficiency is further exacerbated by the disparity in bandwidth provisioning: inter-node network bandwidth is generally more cost-effective and accessible, whereas intra-node bandwidth is often proprietary and more costly to scale. To address this fundamental imbalance, we propose RAIL, aimed at resolving the intra-node bottleneck by strategically rearranging inter-GPU communication paths. This rebalancing ensures that traffic loads are appropriately matched with the distinct transmission capabilities of each domain, thereby maximizing overall communication performance. RAIL incorporates a Load Distributing Strategy (LDS) that can accurately partition physical nodes into logical nodes based on the a transmission capabilities of both domains, shifting excess traffic from the overloaded intra-node domain to the underutilized network domain. Additionally, the Intra-Rail Strategy (IRS) leverages topological characteristics to ensure optimal communication paths through the network domain between logical nodes. Our evaluation demonstrates that RAIL effectively mitigates congestion and achieves a 30.7% average increase in collective communication bus bandwidth compared to the widely-used NCCL solution.

In modern datacenters, the effectiveness of end-to-end congestion control (CC) is quickly diminishing with the rapid bandwidth evolution. Per-hop flow control (FC) can react to congestion more promptly. However, a coarse-grained FC can result in Head-Of-Line (HOL) blocking. A fine-grained, per-flow FC can eliminate HOL blocking caused by flow control, however, it does not scale well. This paper presents Pyrrha, a scalable flow control approach that provably eliminates HOL blocking while using a minimum number of queues. In Pyrrha, flow control first takes effect on the root of the congestion, i.e., the port where congestion occurs. And then flows are controlled according to their contributed congestion roots. A prototype of Pyrrha is implemented on Tofino2 switches. Compared with state-of-the-art approaches, the average FCT of uncongested flows is reduced by 42%-98%, and 99th-tail latency can be$1.6\times $-$215\times $lower, without compromising the performance of congested flows.

In data center networks, various types of traffic with strict performance requirements operate simultaneously, necessitating effective isolation and scheduling through priority queues. However, most switches support only around ten priority queues. Virtual priority can address this limitation by emulating multi-priority queues on a single physical queue, but existing solutions often require complex switch-level scheduling and hardware changes. Our key insight is that virtual priority can be achieved by carefully managing bandwidth contention in a physical queue, which is traditionally handled by congestion control (CC) algorithms. Hence, the virtual priority mechanism needs to be tightly coupled with CC. In this paper, we propose PrioPlus, a CC enhancement algorithm that can be integrated with existing congestion control schemes to enable virtual priority transmission. PrioPlus assigns specific delay ranges to different priority levels, ensuring that flows transmit only when the delay is within the assigned range, effectively meeting virtual priority requirements. Compared to Swift CC with physical priority queues, PrioPlus provides strict priority for high-priority flows without impacting performance sensibly. Meanwhile, it benefits low-priority flows from 25% to 41% as its priority-aware design enhances CC's ability to fully utilize available bandwidth once higher-priority traffic completes. As a result, in coflow and model training scenarios, PrioPlus improves job completion times by 21% and 33%, respectively, compared to Swift with physical priority queues.

BCube is a modular data center network.Compared with other topologies, BCube has natural advantages, such as lower deployment costs and stronger failure recovery capabilities.However, RDMA technology used in BCube still faces challenges, including high retransmission overhead, Head-of-Line Blocking (HoLB) and deadlock problems.Existing solutions for traditional data centers cannot simultaneously address these issues due to the unique topology and server transmission characteristics of BCube.In this paper, we propose a per-port flow control named PortFC for BCube.PortFC addresses the above problems through the designs of a Pause/Resume control signal, a per-port queue allocation method, an egress-detecting per-port flow control mechanism, and a serveraware queue scheduling method.Our evaluation shows that PortFC is free from retransmission, capable of eliminating HoLB and avoiding deadlocks.PortFC achieves 1.7-8.0times higher throughput and reduces latency by 11.7%-87.7%compared to the state-of-the-art

In the pursuit of designing high-performance network (HPN) protocols, three critical features for effective transmission have been extensively studied: In-order Delivery, Lossless Transmission, and Out-of-order Capability. However, no practical implementation has successfully achieved all three simultaneously. We identify and prove that the simultaneous realization of these features constitutes a necessary and sufficient condition for a new type of deadlock, which we term Orderlock. We demonstrate that operating in an Orderlock-risky network is impractical and conduct a comprehensive exploration and comparison of Orderlock-free protocols, through a case study tuning AI workload performance. From an Orderlock-prevention perspective, our findings provide insights into the requirements for future HPN protocol and hardware designs.

With the proliferation of online data intensive applications and virtualized services, the growing complexity of traffic patterns in data centers increases the likelihood of congestion, especially in incast scenarios and with a combination of short and large flows. To ensure lossless transmission, RDMA over Converged Ethernet networks rely on Priority-based Flow Control (PFC) to prevent packet loss due to buffer overflow. However, it is widely acknowledged that PFC gives rise to several issues, such as Congestion Spreading, Head-of-Line Blocking, and Deadlock, which are increasingly prominent in modern highly congested data centers. In this paper, we analyze the primary causes of congestion spreading and head-of-line blocking issues associated with PFC and propose Original congestion-based fine-grained priority Flow Control (OFC) as a solution. The performance of OFC is assessed using the programmable switch Tofino and simulations carried out with a packet-level simulator across various scenarios, encompassing incast, realistic, deadlock, and in-depth scenarios. The validation of the simulation results through testbed evaluation confirmed that OFC effectively reduces flow completion time, buffer occupancy, and deadlock occurrence by up to 60.28%, 51.47%, and 48.7%, respectively.

Despite the bandwidth scaling limit of electrical switching and the high cost of building Clos data center networks (DCNs), the adoption of optical DCNs is still limited. There are two reasons. First, existing optical DCN designs usually face high deployment complexity. Second, these designs are not full-optical and the performance benefit over the non-blocking Clos DCN is not clear. After exploring the design tradeoffs of the existing optical DCN designs, we propose TROD (ThresholdRouting basedOpticalDatacenter), a low-complexity optical DCN with superior performance than other optical DCNs. There are two novel designs in TROD that contribute to its success. First, TROD performs robust topology optimization based on the recurring traffic patterns and thus does not need to react to every traffic change, which lowers deployment and management complexity. Second, TROD introduces tVLB (threshold-based Valiant Load Balance), which can avoid network congestion as much as possible even under unexpected traffic bursts. We conduct simulation based on both Facebook’s real DCN traces and our synthesized highly bursty DCN traces. TROD reduces flow completion time (FCT) by about 1.15-2.16$\times$compared to Google’s Jupiter DCN, at least 2$\times$compared to other optical DCN designs, and about 2.4-3.2$\times$compared to expander graph DCN. Compared with the non-blocking Clos, TROD reduces the hop count of the majority packets by one, and could even outperform the non-blocking Clos with proper bandwidth over-provision at the optical layer. Note that TROD can be built with commercially available hardware and does not require host modifications.

Many optical circuit switched data center networks (DCN) have been proposed in the last decade to attain higher capacity and topology reconfigurability, though commercial adoption of these architectures have been minimal. One major challenge these architectures face is the difficulty of handling uncertain traffic demands using commercial optical circuit switches (OCS) with high switching latency. Prior works have generally focused on developing fast-switching OCS prototypes to quickly react to traffic variations through frequent reconfigurations. This approach, however, adds tremendous complexity overhead to the control plane, and raises the barrier for commercial adoption of optical circuit switched data center networks. We propose, a robust topology and routing optimization framework for reconfigurable optical circuit switched data centers. co-optimizes topology and routing based on a convex set of traffic matrices, and offers strict throughput guarantees for any future traffic matrices bounded by the convex set. For the bursty traffic demands that are unbounded by the convex set, we employ a desensitization technique to reduce performance hit. This enables to generate topology and routing solutions capable of handling unexpected traffic changes without relying on frequent topology reconfigurations. Our extensive evaluations based on Facebook’s production DCN traces show that, even with daily reconfigurations which could be realized by current commercial MEMS-based OCSs from Calient Technologies, achieves about 20% lower max link utilization, and about 32% lower average hop count compared to cost-equivalent static topologies. Our work shows that adoption of reconfigurable topologies in commercial DCNs is feasible even without fast OCSs.

Despite the bandwidth scaling limit of electrical switching and the high cost of building Clos data center networks (DCNs), the adoption of optical DCNs is still limited. There are two reasons. First, existing optical DCN designs usually face tremendous deployment complexity. Second, these designs are not full-optical and the performance benefit against the non-blocking Clos DCN is not clear.After exploring the design tradeoffs of the existing optical DCN designs, we propose TROD (Threshold Routing based Optical Datacenter), a low-complexity optical DCN with superior performance than other optical DCNs. There are two novel designs in TROD that contribute to its success. First, TROD performs robust topology optimization based on the recurring traffic patterns and thus does not need to react to every traffic change, which lowers deployment and management complexity. Second, TROD introduces tVLB (threshold-based VLB), which can avoid network congestion as much as possible even under unexpected traffic bursts. We conduct simulation based on both Facebook’s real DCN traces and our synthesized highly bursty DCN traces. TROD reduces flow completion time (FCT) by at least 2× compared with the existing optical DCN designs, and by approximately 2.4-3.2× compared with expander graph DCN. Compared with the non-blocking Clos, TROD reduces the hop count of the majority packets by one, and could even outperform the non-blocking Clos with proper bandwidth over-provision at the optical layer. Note that TROD can be built with commercially available hardware and does not require host modifications.

We study how to design edge server placement and server scheduling policies under workload uncertainty for 5G networks. We introduce a new metric called resource pooling factor to handle unexpected workload bursts. Maximizing this metric offers a strong enhancement on top of robust optimization against workload uncertainty. Using both real traces and synthetic traces, we show that the proposed server placement and server scheduling policies not only demonstrate better robustness against workload uncertainty than existing approaches, but also significantly reduce the cost of service providers. Specifically, in order to achieve close-to-zero workload rejection rate, the proposed server placement policy reduces the number of required edge servers by about 25% compared with the state-of-the-art approach; the proposed server scheduling policy reduces the energy consumption of edge servers by about 13% without causing much impact on the service quality.