Thermal Infrared detection is widely used in autonomous driving, medical AI, etc., but its security has only attracted attention recently. We propose infrared adversarial clothing designed to evade thermal person detectors in real-world scenarios. The design of the adversarial clothing is based on 3D modeling, which makes it easier to simulate multiangle scenes near the real world compared to 2D modeling. We optimized the patch layout pattern of 3D clothing based on the adversarial example technique and made physical adversarial clothing using the aerogel. The idea is to paste a set of square aerogel patches, which display black squares in thermal images, in the inner side of clothing at specific locations with specific orientations. To enhance realism, we propose a method to build infrared 3D models with real infrared photos and develop texture maps for 3D models to simulate varied infrared characteristics over time and location. In physical attacks, we achieved an attack success rate of 80.11% indoors and 76.85% outdoors against YOLOv9. In contrast, randomly placed patches yielded much lower success rates (26.53% indoors and 23.03% outdoors). The adversarial clothing also showed good transferability to unknown detectors with an ensemble attack method, demonstrating the effectiveness of our approach.

Infrared physical adversarial examples are of great significance for studying the security of infrared AI systems that are widely used in our lives such as autonomous driving. Previous infrared physical attacks mainly focused on 2D infrared pedestrian detection which may not fully manifest its destructiveness to AI systems. In this work, we propose a physical attack method against infrared detectors based on 3D modeling, which is applied to a real car. The goal is to design a set of infrared adversarial stickers to make cars invisible to infrared detectors at various viewing angles, distances, and scenes. We build a 3D infrared car model with real infrared characteristics and propose an infrared adversarial pattern generation method based on 3D mesh shadow. We propose a 3D control points-based mesh smoothing algorithm and use a set of smoothness loss functions to enhance the smoothness of adversarial meshes and facilitate the sticker implementation. Besides, We designed the aluminum stickers and conducted physical experiments on two real Mercedes-Benz A200L cars. Our adversarial stickers hid the cars from Faster RCNN, an object detector, at various viewing angles, distances, and scenes. The attack success rate (ASR) was 91.49% for real cars. In comparison, the ASRs of random stickers and no sticker were only 6.21% and 0.66%, respectively. In addition, the ASRs of the designed stickers against six unseen object detectors such as YOLOv3 and Deformable DETR were between 73.35%-95.80%, showing good transferability of the attack performance across detectors.

Recent works have proposed to craft adversarial clothes for evading person detectors, while they are either only effective at limited viewing angles or very conspicuous to humans. We aim to craft adversarial texture for clothes based on 3D modeling, an idea that has been used to craft rigid adversarial objects such as a 3D-printed turtle. Unlike rigid objects, humans and clothes are non-rigid, leading to difficulties in physical realization. In order to craft natural-looking adversarial clothes that can evade person detectors at multiple viewing angles, we propose adversarial camou-flage textures (AdvCaT) that resemble one kind of the typical textures of daily clothes, camouflage textures. We leverage the Voronoi diagram and Gumbel-softmax trick to parameterize the camouflage textures and optimize the parameters via 3D modeling. Moreover, we propose an efficient augmentation pipeline on 3D meshes combining topologically plausible projection (TopoProj) and Thin Plate Spline (TPS) to narrow the gap between digital and real-world objects. We printed the developed 3D texture pieces on fabric materials and tailored them into T-shirts and trousers. Experiments show high attack success rates of these clothes against multiple detectors.

Nowadays, cameras equipped with AI systems can capture and analyze images to detect people automatically. However, the AI system can make mistakes when receiving deliberately designed patterns in the real world, i.e., physical adversarial examples. Prior works have shown that it is possible to print adversarial patches on clothes to evade DNN-based person detectors. However, these adversarial examples could have catastrophic drops in the attack success rate when the viewing angle (i.e., the camera's angle towards the object) changes. To perform a multi-angle attack, we propose Adversarial Texture (AdvTexture). AdvTexture can cover clothes with arbitrary shapes so that people wearing such clothes can hide from person detectors from different viewing angles. We propose a generative method, named Toroidal-Cropping-based Expandable Generative Attack (TC-EGA), to craft AdvTexture with repetitive structures. We printed several pieces of cloth with AdvTexure and then made T-shirts, skirts, and dresses in the physical world. Experiments showed that these clothes could fool person detectors in the physical world.

Thermal infrared imaging is widely used in body temperature measurement, security monitoring, and so on, but its safety research attracted attention only in recent years. We proposed the infrared adversarial clothing, which could fool infrared pedestrian detectors at different angles. We simulated the process from cloth to clothing in the digital world and then designed the adversarial “QR code” pattern. The core of our method is to design a basic pattern that can be expanded periodically, and make the pattern after random cropping and deformation still have an adversarial effect, then we can process the flat cloth with an adversarial pattern into any 3D clothes. The results showed that the optimized “QR code” pattern lowered the Average Precision (AP) of YOLOv3 by 87.7%, while the random “QR code” pattern and blank pattern lowered the AP of YOLOv3 by 57.9% and 30.1%, respectively, in the digital world. We then manufactured an adversarial shirt with a new material: aerogel. Physical-world experiments showed that the adversarial “QR code” pattern clothing lowered the AP of YOLOv3 by 64.6%, while the random “QR code” pattern clothing and fully heat-insulated clothing lowered the AP of YOLOv3 by 28.3% and 22.8%, respectively. We used the model ensemble technique to improve the attack transferability to unseen models.

Thermal infrared detection systems play an important role in many areas such as night security, autonomous driving, and body temperature detection. They have the unique advantages of passive imaging, temperature sensitivity and penetration. But the security of these systems themselves has not been fully explored, which poses risks in applying these systems. We propose a physical attack method with small bulbs on a board against the state of-the-art pedestrian detectors. Our goal is to make infrared pedestrian detectors unable to detect real-world pedestrians. Towards this goal, we first showed that it is possible to use two kinds of patches to attack the infrared pedestrian detector based on YOLOv3. The average precision (AP) dropped by 64.12% in the digital world, while a blank board with the same size caused the AP to drop by 29.69% only. After that, we designed and manufactured a physical board and successfully attacked YOLOv3 in the real world. In recorded videos, the physical board caused AP of the target detector to drop by 34.48%, while a blank board with the same size caused the AP to drop by 14.91% only. With the ensemble attack techniques, the designed physical board had good transferability to unseen detectors.