An electromagnetic imaging framework is implemented utilizing a single frequency reverse time migration (RTM) technique to accurately reconstruct inaccessible two-dimensional (2D) rough surface profiles from the knowledge of scattered field data. The unknown surface profile, which is expressed as a 1D height function, is either perfectly electric conducting (PEC) or an interface between two penetrable media. For both cases, it is assumed that the surface is illuminated by a number of line sources located in the upper medium. The scattered fields, which should be collected by real measurements in practical applications, are obtained synthetically by solving the associated direct scattering problem through the surface integral equations. RTM is subsequently applied to generate a cross-correlation imaging functional which is evaluated numerically and provides a 2D image of the region of interest. A high correlation is observed by the functional in the regions where the transitions between two media occur. Hence, it results in the acquisition of the unknown surface profile at the sites where the functional attains its highest values. The efficiency of the proposed method is comprehensively tested by numerical examples covering various types of scattering scenarios.

This letter addresses a reconstruction algorithm of locally rough inaccessible surface profiles via the knowledge of the scattered field data under the consideration of the impedance boundary condition (IBC). To this aim, first, the synthetic scattered field data are obtained through the solution of the conventional surface integral equation (SIE) written on the rough surface. Then, the same SIE together with the data equation is solved iteratively via Newton’s method to obtain the image of the rough surface profile. In the numerical implementation, the nonlinear ill-posed inverse problem is linearized in an iterative fashion via the Newton method and regularized by Tikhonov in the least-squares sense. The feasibility of the algorithm is provided via numerical examples, which shows that the method is effective and promising.

This work addresses an iteration scheme to observe the image of an inaccessible rough surface profile from the intensity of scattered field data. The solution of the problem is based on the integral equations written on the rough surface profile. By virtue of the surface integral equations, the phaseless scattered field is represented by a nonlinear ill-posed integral operator, which is linearized by Newton’s method and regularized via Tikhonov. The surface image is reconstructed iteratively in the least-squares sense by utilizing spline-type basis functions. A detailed numerical assessment is provided, showing that the algorithm is very effective and promising.

This paper presents a new method for the reconstruction of the perfectly electric conducting (PEC) rough surface profiles by utilizing electromagnetic waves. The inaccessible rough surface is illuminated by a tapered plane electromagnetic wave and the scattered field data are measured on a certain number of points above the surface under test. The method for the inverse electromagnetic imaging problem is based on a special representation of the scattered field in terms of a finite number of fictitious discrete line sources located along a plane below the rough surface. The current densities of these fictitious sources are obtained through the regularized solution of an ill-posed problem. Then, it is shown that the image of the rough surface can be directly retrieved by seeking the points in the space where the tangential component of the total electric field vanishes. Alternatively, a much more rigorous iterative method based on a regularized Newton algorithm is also presented. A comprehensive numerical analysis is provided to demonstrate the feasibility of the presented approach. In this context, the quantitative successes of both approaches are interpreted by considering a very sensitive ℓ2-norm based error function between the actual and the reconstructed surface profiles. Regarding different scattering scenarios taken into account, the error values obtained for satisfactory reconstructions are generally in the range of 10% - 30% for both methods. It is also shown that the presented algorithms are capable of reconstructing the rough surfaces which oscillate for every λ horizontally and have a peak to peak variation 0.5λ at most.

In this article, an efficient algorithm for the reconstruction of a 1-D random rough surface profile separating two lossy dielectric half-spaces is presented. First, the general scattering problem is formulated by the use of surface integral equations (SIEs). Then, the synthetic scattering field data are obtained through the use of these conventional SIEs. In the inverse problem, the same SIEs together with the data equation are solved in an iterative fashion to reconstruct the surface variation. In the numerical implementation, the so-called ill-posed inverse problem is regularized in the sense of Tikhonov, and a least squares solution is obtained by the use of appropriate basis functions. A very detailed numerical assessment of the presented approach is provided which shows that the method is very effective and promising.