The THz band (0.1-10 THz) has attracted considerable attention for next-generation wireless communications due to the large amount of available bandwidth that may be key to meet the rapidly increasing data rate requirements. Before deploying a system in this band, a detailed wireless channel analysis is required as the basis for proper design and testing of system implementations. One of the most important deployment scenarios of this band is the outdoor microcellular environment, where the Transmitter (Tx) and the Receiver (Rx) have a significant height difference (typically ≥ 10 m). In this paper, we present double-directional (i.e., directionally resolved at both link ends) channel measurements in such a microcellular scenario encompassing street canyons and an open square. Measurements are done for a 1 GHz bandwidth between 145-146 GHz and an antenna beamwidth of 13 degree; distances between Tx and Rx are up to 85 m and the Tx is at a height of 11.5 m from the ground. The measurements are analyzed to estimate path loss, shadowing, delay spread, angular spread, and multipath component (MPC) power distribution. These results allow the development of more realistic and detailed THz system performance assessment.

THz band is envisioned to be used in 6G systems to meet the ever-increasing demand for data rate. However, before an eventual system design and deployment can proceed, detailed channel sounding measurements are required to understand key channel characteristics. In this paper, we present a first extensive set of channel measurements for urban outdoor environments that are ultra-wideband, and double-directional where both transmitter and receiver are at the same height. In all, we present measurements at 38 locations, consisting of nearly 50,000 impulse responses, representing both line-of-sight (LoS) and non-line-of-sight (NLoS) cases in the 1-100 m range between 145-146 GHz. We provide modeling for path loss, shadowing, delay spread, angular spread, multipath component (MPC) power distribution and Qtapnumber. We find, among other things, that outdoor communication over tens of meters is feasible in this frequency range even in NLoS scenarios, that omni-directional delay spreads of up to 100 ns, and directional delay spreads of up to 10 ns are observed, while angular spreads are also quite significant, and a surprisingly large number of MPCs are observed for 1 GHz bandwidth and 13° beamwidth. These results constitute an important first step towards better understanding the wireless channel in the THz band.

THz communication has attracted a great deal of attention due to the large bandwidth available in this band. However, system development and deployment requires detailed knowledge of the wireless channel, which must be provided by measurements (channel sounding) and subsequent modeling in key scenarios of interest. One important scenario in this regard is the urban outdoor microcellular scenario where the Transmitter (Tx) and the Receiver (Rx) have a significant height difference. In this paper, we present ultra-wideband double-directional channel measurements in a microcellular scenario for the band between 145-146 GHz in a street canyon with Tx-Rx of distances up to 67 m. The results are analyzed in the delay and angular domain, and the impact of the street canyon on the power delay profiles and angular power spectra is detailed. These measurements thus contribute towards the creation of a more realistic and detailed THz channel model in these scenarios.

Wireless communications in the THz frequency range can allow data rates of hundreds of Gbit/s, and will thus be an important part of 6G. A first important step for system design is an understanding of the underlying propagation channel. In this paper, we present results from one of the first measurement campaigns for medium-distance (up to 35 m) outdoor channels in urban environments where both the directions and delays of multipath are measured with good resolution. The results show a surprisingly rich multipath environment, leading to significant dispersion in both delay and angular domains. We also find that metallic-covered surfaces lead to a considerable enhancement of multipath, which indicates an important impact of building materials. Overall, the results indicate that relying on pronounced sparsity for THz system design might not always be valid in this type of environment.