Visible light positioning (VLP) is one of the most promising technologies for providing high-precision, low-cost indoor positioning and navigation services. However, the traditional calibration methods of VLP are complex and unfriendly to users, which hinders the large-scale commercial deployment of VLP systems. In this paper, a fast and robust calibration method for received signal strength (RSS)-based VLP system is proposed, which dispenses with geometric measurement and greatly simplifies the calibration procedures. The proposed method calibrates the Lambert model through two steps, firstly using a ratio method to calibrate the Lambert order, and then estimating the constant term. The actual processes only require moving a robot equipped with a photo-detector (PD) along a rectangular trajectory once, and then the program will automatically estimate the required parameters by analyzing the RSS during this period. Experimental results show a good stability of the calibrated parameters, as well as a excellent distance measuring accuracy within 12 cm. The proposed method is 3.7 times more efficient than traditional methods while the positioning accuracy is close, which will greatly reduce the time and labor costs of large-scale deployment.

Visible Light Positioning (VLP), a promising indoor positioning technique, has gained wide popularity worldwide because of its ubiquitous infrastructure, low power consumption, and high positioning precision. However, VLP systems based on photodiodes (PDs) often suffer from varying ambient light with time and space, which seriously degrades their positioning precision and robustness. In this article, we carefully evaluate the influence of the ambient light on the VLP system, which includes the reduction of positioning accuracy by varying ambient light with time and the inaccurate parameter calibration by unevenly distributed ambient light. Then, we figure out that the influence of ambient light on the Received Signals Strength (RSS) values is determined by the ambient light intensity and PD, which is independent of external factors, including distance, frequency, LED, etc. Next, we propose a new positioning framework, RatioVLP, where a ratio model that is more robust to varying ambient light with time is used. However, the ratio model is severely dependent on the Lambert parameters that are vulnerable to ambient light, which reduces the framework's precision when the calibration area is unevenly covered by ambient light. Thus, we design new parameters that are less sensitive to ambient light, calledR parameter, to connect the RSS ratio and its corresponding distance ratio, which can strengthen the ratio model's robustness and effectively reduce the influence of ambient light on the parameter calibration process. Experimental results show that the positioning precision of the proposed method is improved by more than 50 % when compared to the conventional Lambert model in scenes influenced by ambient light.

As a critical topic of Internet of Things applications, smartphone-based indoor navigation has a rapidly growing need in various applications. However, indoor navigation technology is unreliable when facing a challenge in complex indoor environments. This article presents a tightly coupled (TC) integration of pedestrian dead reckoning (PDR) and Bluetooth for indoor pedestrian navigation and enhances it from three approaches. We first establish a Gaussian-based distance model (GDM) that improves the signal path-loss model to incorporate the prior information on the variation of signal volatility with distance. Then, the use of map information and a back-off strategy to optimize the particle transfer strategy further improves the positioning accuracy and rationality of the system. Moreover, we leverage behavioral landmarks, signal landmarks, and distance information to build a graph optimization model to optimize the proposed navigator. We have extensively verified the proposed navigator and compared it with the existing solutions and systems. Experimental results demonstrated that the average errors of the proposed solutions in three scenes were 34.71% of Bluetooth, 14.04% of PDR, 45.13% of the extended Kalman filter, 57.83% of the unscented Kalman filter, and 56.10% of PF, respectively. The results showed that our proposed solution has apparent advantages, especially when addressing the issues of incorrect trajectory updating and divergence of the system in a complex environment.

In recent years, indoor positioning has drawn intensive attention for both pedestrian and mobile robot applications. Among various indoor positioning technologies, visible light positioning has many advantages due to its high localization accuracy, high bandwidth, energy efficiency, long lifetime, and cost efficiency. For postprocessing or semi-real-time applications, researchers often use smoothers to improve location accuracy. However, smoothers are always local estimators and lack integrity when calculating locations. To globally optimize the positioning results and further improve the accuracy, we propose a nonlinear optimization model based on the idea of graph optimization. Innovatively, the model adds the acceleration as a constraint to become one part of the residuals and regularize the trajectory. We design a signal-to-noise ratio-based weighting strategy to suppress the outliers and better assess the errors. Moreover, we design a loop constraint to further improve the positioning accuracy. The experimental results show that our proposed model significantly improves the accuracy by 71%, which is suitable for indoor positioning.