Sensing technology is a cornerstone for many industrial applications. Manufacturing plants and engineering facilities, such as shipboard engine rooms, require sensors to ensure product quality and efficient and safe operation. We focus on one representative application, preventative equipment maintenance, in which vibration signatures are gathered to predict equipment failure. Based on application requirements and site surveys, we develop a general architecture for this class of industrial applications. This architecture meets the application's data fidelity needs through careful state preservation and over-sampling. We describe the impact of implementing the architecture on two sensing platforms with differing processor and communication capabilities. We present a systematic performance comparison between these platforms in the context of the application. We also describe our experience and lessons learned in two settings: in a semiconductor fabrication plant and onboard an oil tanker in the North Sea. Finally, we establish design guidelines for an ideal platform and architecture for industrial applications. This paper includes several unique contributions: a study of the impact of platform on architecture, a comparison of two deployments in the same application class, and a demonstration of application return on investment.

The wireless sensor network "macroscope" offers the potential to advance science by enabling dense temporal and spatial monitoring of large physical volumes. This paper presents a case study of a wireless sensor network that recorded 44 days in the life of a 70-meter tall redwood tree, at a density of every 5 minutes in time and every 2 meters in space. Each node measured air temperature, relative humidity, and photosynthetically active solar radiation. The network captured a detailed picture of the complex spatial variation and temporal dynamics of the microclimate surrounding a coastal redwood tree. This paper describes the deployed network and then employs a multi-dimensional analysis methodology to reveal trends and gradients in this large and previously-unobtainable dataset. An analysis of system performance data is then performed, suggesting lessons for future deployments.

We propose a SAN architecture called Queue Pair IP (QPIP) that combines the interface from industry proposals for low overhead, high bandwidth networks, e.g. Infiniband, with the well established inter-network protocol suite. We evaluate how effectively the queue pair abstraction enables inter-network protocol offload We develop a prototype QPIP system that implements basic queue pair operations over a subset of TCP, UDP and IPv6 protocols using a programmable network adapter. We assess this prototype in terms of basic application performance, underlying processing costs, and a network storage application. With modest hardware support, QPIP can perform as well as traditional inter-network protocol implementations at a fraction of the host CPU overhead. With hardware support equivalent to Infiniband, QPIP would achieve similar performance targets.

Abstract We present the results of a detailed study of the Virtual Interface (VI) paradigm as a communication foundation for a distributed computing environment. Using Active Messages and the Split‐C global memory model, we analyze the inherent costs of using VI primitives to implement these high‐level communication abstractions. We demonstrate a minimum mapping cost (i.e. the host processing required to map one abstraction to a lower abstraction) of 5.4 μs for both Active Messages and Split‐C using four‐way 550 MHz Pentium III SMPs and the Myrinet network. We break down this cost to the use of individual VI primitives in supporting flow control, buffer management and event processing and identify the completion queue as the source of the highest overhead. Bulk transfer performance plateaus at 44 Mbytes/s for both implementations are due to the addition of fragmentation requirements. Based on this analysis, we present the implications for the VI successor, Infiniband. Copyright © 2002 John Wiley & Sons, Ltd.

Rapid developments in networking technology and a rise in clustered computing have driven research studies in high performance communication architectures. In an effort to standardize the work in this area, industry leaders have developed the Virtual Interface Architecture (VIA) specification. This architecture seeks to provide an operating system-independent infrastructure for high-performance user-level networking in a generic environment. This paper evaluates the inherent costs and performance potential of the Virtual Interface Architecture through a prototype implementation over Myrinet. The VIA prototype is compared against established research user-level networks using simple communication benchmarks on the same hardware. We consider extensions to the VI Architecture that improve its performance for certain types of communication traffic and outline further research areas in the VIA design space that merit investigation.