Recent advancements have underscored the relevance of low-resolution analog-to-digital converters (ADCs) in integrated sensing and communication (ISAC) systems. Nevertheless, their specific impact on hybrid radar fusion (HRF) remains largely unexplored. In HRF systems, where uplink (UL) paths carry direct and reflected signals in the same frequency band, the reflected signal is often significantly weaker, making HRF performance particularly sensitive to ADC resolution. To study this effect, we use the quantized Cramér-Rao bound (CRB) to measure sensing accuracy. This work derives an upper bound on the quantized CRB for angle of arrival (AoA) estimation and explores CRB-rate trade-offs through two formulated optimization problems. Simulation results indicate that HRF becomes infeasible when the dynamic range of the received signal exceeds the dynamic range supported by the ADC, which is inherently limited by its resolution. Furthermore, the UL communication rate does not increase significantly when the ADC resolution is raised beyond a certain threshold. These observations highlight a fundamental trade-off between sensing and communication performance: while HRF performance benefits from higher ADC resolutions, the corresponding gains in communication rate plateau. This trade-off is effectively characterized using CRB-rate boundaries derived through simulation.

The next generation of wireless communication is expected to harness the potential of the sub- THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYUSIM channel model to simulate channels above 100 GHz in all 3GPP scenarios including urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF). We evaluate the full stack downlink end-to-end performance (throughput, latency, and packet drop) experienced by a single user equipment (UE) connected to a Next Generation Node B (gNB) operating in the sub- THz bands for three gNB-UE antenna configurations: 8x8-4x4, 16xI6-4x4, and 64x64-8x8 by using the NYUSIM channel model at 140 GHz in the ns-3 mmWave module. Our simulations demonstrate that sub-THz bands can enable high-fidelity applications that require data rates exceeding 1 Gbps and latency below 15 milliseconds (ms) using the current mmWave protocol stack, and large antenna arrays. In addition, we show the variation in throughput vs number of realizations and find the optimal number of realizations required to obtain statistically significant results. We strongly encourage researchers worldwide to adopt a similar approach, as it enables the readers to assess the accuracy and reliability of the reported results and enhance the findings” overall interpretability.

The following paper introduces a novel integrated sensing and communication (ISAC) scenario termed hybrid radar fusion. In this setting, the dual-functional radar and communications (DFRC) base station (BS) acts as a mono-static radar in the downlink (DL), for sensing purposes, while performing its DL communication tasks. Meanwhile, the communication users act as distributed bi-static radar nodes in the uplink (UL) following a frequency-division duplex protocol. The DFRC BS fuses the information available at different DL and UL resource bands to estimate the angles-of-arrival (AoAs) of the multiple targets existing in the scene. In this work, we derive the maximum likelihood (ML) criterion for the hybrid radar fusion problem at hand. Additionally, we design efficient estimators; the first algorithm is based on an alternating optimization approach to solve the ML criterion, while the second one designs an optimization framework that leads to an alternating subspace approach to estimate AoAs for both the target and users. Finally, we demonstrate the superior performance of both algorithms in different scenarios, and the gains offered by these proposed methods through numerical simulations.

Non-orthogonal multiple access (NOMA) is a next-generation multiple access technology to improve users’ throughput and spectral efficiency for 5G and beyond cellular networks. Similarly, coordinated multi-point transmission and reception (CoMP) is an existing technology to improve the coverage of cell-edge users. Hence, NOMA with CoMP can potentially enhance the throughput and coverage of the users. However, the order of implementation of CoMP and NOMA can significantly impact the system performance of Ultra-dense networks (UDNs). Motivated by this, we study the performance of the CoMP and NOMA-based UDN by proposing two kinds of user grouping and pairing schemes that differ in the order in which CoMP and NOMA are performed for a group of users. Detailed simulation results are presented, comparing the proposed schemes with the state-of-the-art systems with varying user and base station densities. Through numerical results, we show that the proposed schemes can be used to achieve a suitable coverage-throughout trade-off in UDNs.